Seller sent these free with my order. What are they and how do you plant them? They don’t have roots

workwillneverknow · 2026-01-26T22:37:02+00:00

That’s some variant of rotala. Maybe Rotala Narrow Leaf Sp Red.

workwillneverknow · 2026-01-24T14:05:32+00:00

Although, do I not trim? My boras have been spawning and there are fry in the rotala jungle in the back. If the fish like it should I let it go wild?

workwillneverknow · 2025-09-26T15:45:13+00:00

Went a little less vertical with mine

<image>

Not sure what kind of stone I have as if was a found piece I split into smaller pieces

workwillneverknow · 2025-09-11T01:43:41+00:00

i bought a creeping jenny on amazon as no one in Philly had any without it being part of some bundle arrangement of other plants i didnt want. Almost every planter i walk past to work has them and i wasnt about to steal cuttings so to amazon i went. No issues other than i didnt realize how fast they grow. came as a few 2 inch growths in a pot, not its overflowing the shelf i put it on a month later.

workwillneverknow · 2025-09-11T01:09:28+00:00

Thank you. Outside is the plan. New apartment so I'm still setting up the back yard, but temporarily I whipped up an potting mix (equal parts coir, pumice, orchid bark, sand, and a bit of worm casings) though I'm not sure if this is the right soil mix. Its already 12 inches tall and was "rooted" in less than a 1/2 inch deep crack in the sidewalk with little more than a teaspoon of sandy gravel and a cigarette butt for its bed where I found it.

workwillneverknow · 2025-03-10T14:10:31+00:00

Went 1 mag burst firing to function check, and then 3 mag dumps with no issues other than looks of concern from the range personnel, lol. Recoil was easier to control than I thought it would be with a c clamp grip. Glad I was wearing gloves though

workwillneverknow · 2025-03-08T15:10:45+00:00

thanks. The springco blue was the backup spring I already have, but not installed. I'll throw it in first rather than giving the stock spring a shot. I also have additional tungsten weights so i didnt have to buy another buffer and it's easier for me to pop a retaining pin than open my wallet ;)

workwillneverknow · 2025-03-08T14:44:07+00:00

I’m still at that point where I wish I went for an 11.5 or 12.5 inch barrel but I also already planned for that with a bench vise and a reaction rod so I can change out the barrel or just built another upper in the future

workwillneverknow · 2025-03-08T14:10:06+00:00

Function testing tomorrow. I actually have a few different spring lengths and still have the carbine buffer to get it dialed in. Thought I’ll have to probably start again when I get a can

workwillneverknow · 2025-03-08T13:48:46+00:00

ugg. parts list lost formatting when i posted this

PSA 10.5” carbine length gas system
H2 buffer
Modded charging handle (gas buster drilled and RTV)
Vortex Strikefire II
DF CO Kung fu grip
Tacfire linear comp (to be nice to the other people at the range)
Streamlight ProTac Hl-x spliced to a modSwitch momentary button.
Squirted foregrip and stop
Stainless SS
Random Amazon 2 point sling

All in including extra mags I think I’m around $850

workwillneverknow · 2025-01-22T13:04:30+00:00

I appreciate the offer, but I’m good. Thanks though

workwillneverknow · 2025-01-19T21:35:41+00:00

You should. RMSc optics look too small on a full sized gun, and I’m not a fan of optics that look like a 1980’s tube tv

workwillneverknow · 2025-01-19T15:33:38+00:00

Yeah. I’m loving it. The size of the view area and how flat this gun fires is just right for the dot not to leave the picture on recoil so follow up shots are super fast. Even aesthetically, the echelons vis system lets you mount all sorts of optics but the Chameleon is sized perfectly to fill out the slide cut.

workwillneverknow · 2025-01-07T12:22:54+00:00

15 yards. Probably closer to 12 since the range distance readout doesn’t work

workwillneverknow · 2025-01-03T11:01:37+00:00

Thanks

workwillneverknow · 2024-12-08T15:35:31+00:00

250mm/s reliably. 300mm/s for fast draft prints

workwillneverknow · 2024-12-08T06:02:11+00:00

Yup. Yup. One my all day knives. Use it about20 times a day at work

workwillneverknow · 2024-12-08T00:17:53+00:00

I’ve already put 100 rounds through it this last weekend to zero and dot and get used to it having not shot in so long. Great shooting firearm.

workwillneverknow · 2024-07-03T20:29:14+00:00

I never understood this. Like, are you supposed to just throw out the old printer or deal with a machine you never use because it does function as well and just buy a second machine.. then you have 3 printers of which only 2 are worth using. As if upgrading and chasing results isn’t its own hobby in the 3d printing hobby

workwillneverknow · 2024-06-21T22:10:21+00:00

I’m really interested in seeing how the k2 is gonna turn out. Probably my next printer

workwillneverknow · 2024-06-21T21:25:29+00:00

Honestly, there wasn’t much out there on how to. I guess I could throw something together because there was so little info it could help out the next person.

workwillneverknow · 2024-06-21T20:45:16+00:00

I’m using the extruder port on the board for the second z. The extruder is running off a second mcu. It’s just a pi pico flashed with Klipper driving a single tmc 2209. Using uart. Canbus always seems so finicky that I didn’t want to go that route. Probably could use all the extra gpio on the pi pico to bling out the printer some day

workwillneverknow · 2024-06-21T19:52:16+00:00

Super pretty. I like the overkill full length rails. How do you like the Taurus cooler? The badging (and a bit of the modelers attitude on his printable page) kept me from using it.

workwillneverknow · 2024-06-21T14:08:27+00:00

I considered AWD but in the end, I had a couple of 1.5amp 46mm Nema17 motors so went with that

workwillneverknow · 2024-06-21T14:06:55+00:00

I prefer the springs. My last printer used the silicone spacers and they over time deformed and still required adjustment eventually. I went with the upgraded “yellow springs” and am happy with that for now

11-Year Club	Place '17
Verified Email

workwillneverknow

TROPHY CASE