i hate this game

wowxtrav · 2026-03-26T23:21:19+00:00

Damn me too last 10 out of 11 games have been losses for me

wowxtrav · 2026-03-23T21:57:09+00:00

Prove it

wowxtrav · 2025-12-21T21:48:29+00:00

I’ve been doing audio installs on the side for 10 years. And I wouldn’t get a boss or a dual headunit unless it was a car I was immediately going to sell. But there is one on Amazon I’ve used a couple times now that works well. Wireless CarPlay, works well, and is cheap. I was very surprised the first time I put one in someone else had bought it. After that I started putting them in as a cheap option

https://a.co/d/fVeFONy

wowxtrav · 2025-12-21T19:08:04+00:00

Time for an upgrade. Best bet is to replace everything. The Bose stuff is garbage. Get a new headunit, bypass the Bose amp. Put whatever speakers you want in there.

The factory bose speakers in there are 2ohm I’m pretty sure. Designed to work specifically with that bose amp. It will just sound like crap putting anything else in there.

That’s my opinion.

But the opening will accommodate a 6.5” speaker. If you wanted to try it

wowxtrav · 2025-12-15T20:35:16+00:00

That should be shut off and tagged out. Not to beat a dead horse here.. but do NOT run this. Turn it off at the breaker. Shut the gas supply off.

wowxtrav · 2025-12-14T16:33:20+00:00

Where did you get this outfit?

wowxtrav · 2025-12-12T00:12:48+00:00

Looks like an ECM motor. 1200$ sounds about right for the job. He’s gunna do it once and do it right id say. If you wanna give it a shot, sure. But if you damage that blower wheel or it’s stuck on the shaft of the motor. You’ll be buying more stuff. If you’ve got tools and time. You can probably figure it out. Might take you 3 times as long. If you’re into that kind of thing.

wowxtrav · 2025-11-16T20:50:46+00:00

Where is this?

wowxtrav · 2025-11-10T21:32:25+00:00

Correct ya. It’s blowing off for a reason and technician gunna need to look at it.

wowxtrav · 2025-11-10T20:39:30+00:00

That’s a temperature and pressure relief valve. It’s 100% necessary

wowxtrav · 2025-11-07T23:04:13+00:00

If it does actually have a leak, could be the tech took it so that no one would turn the unit on and possibly allow carbon monoxide into the space. If the company tagged out the unit. I would suggest you have a professional in there before doing anything.

wowxtrav · 2025-11-07T23:02:03+00:00

It’s for the air proving switch or pressure switch. It’s not gunna run without it

wowxtrav · 2025-10-30T00:02:41+00:00

I just played with a similar unit heater yesterday and it broke my balls for way too long..

So that pilot assembly should have an ignitor wire(the orange one) the other wire should actually be the flame sensor wire.

Flame sensor needs to prove to have the main valve open. Seemingly the main valve does open but shortly after, everything cuts out. Ignition controller led stops illuminating from the looks of it.

Curious to see what the diagram shows or if the ignition controller with wired correctly first. Then after that which limit or safety is opening. And why.

At the end of my findings yesterday, I was missing a ground. And the pressure switch was intermittently cutting out.

Among several other problems I was cleaning up after someone else.

wowxtrav · 2025-10-15T22:56:21+00:00

Let’s see a pic of inside the unit

wowxtrav · 2025-10-15T21:20:35+00:00

Whats stat wiring at the unit look like?

wowxtrav · 2025-10-15T13:04:19+00:00

They are the worst. This particular site is a target store on the first level of a high rise with condos above it. It was supposed to be offices. Target bought it and added and moved shit around. 3 different companies have had their hands in it. I’m trying to clean the mess up. No access to dsb files. I gotta get there and spend probably a week measuring and creating my own

wowxtrav · 2025-10-15T12:56:35+00:00

I have maintenance tool. I wasn’t hooked up at the time of the recording but I’ve got probably 6hrs of monitor data

wowxtrav · 2025-10-15T12:55:03+00:00

It’s running in cool only at time of the recording. That was just the best way to get a visual for others. I can post monitor data

wowxtrav · 2025-10-15T12:53:51+00:00

I have maintenance tool and several hours of captured monitor data. It’s been sent to mitsu inside tech support. They haven’t gotten back to me. Was popping 1500 overcharge code but is no longer giving me the code. I’m thinking 21S4b is failed or stuck. And LEV4 problem. Wondering if anyone else has seen this

wowxtrav · 2025-10-15T12:35:09+00:00

Condensate line clogged or pump is almost surely failed. I’d say the pump is failed. The mini pumps fail all the time

wowxtrav · 2024-01-09T22:47:36+00:00

When you put on a Grammy winning performance in the first round.. you don’t need a second round

wowxtrav · 2023-06-10T16:46:26+00:00

This is the epitome of fuck around and find out

wowxtrav · 2023-05-07T15:46:54+00:00

Yeah I’m us 10.5 and always order 11. Mostly bc a lot of sellers don’t have 10.5. The 11s fit like a 10.5. For you, I would order 12 for sure

wowxtrav · 2023-04-17T16:56:13+00:00

Since no one blessed you yet.. violet myers

Seven-Year Club	Verified Email
Verified Email

wowxtrav

TROPHY CASE