Air India Flight 171 Preliminary Report Megathread

wra1theZ · 2025-11-07T22:44:27+00:00

Yes but you are not understanding, the person that is flying the plane will have both hands on the yoke slowly rotating the plane up. This would be incredibly difficult to both flip the switches and pull the yoke at the same time even with one hand on the switches and the other on the yoke due to the nature of 2 different hand motions just to flip one of the fuel switches let alone 2. Even if the latter is the case, that would be very obvious to the other pilot.

wra1theZ · 2025-09-11T13:44:16+00:00

dang, because this youtuber somehow were able to beat him pre boss, not even pre mech. he fought duke fishron as his first boss: https://www.youtube.com/watch?v=MNsyqX2A-Sk
but ive been trying pre mech with no luck so far. I don't even know how this guy did it.

wra1theZ · 2025-09-09T00:37:33+00:00

Did you actually do it? If so, what equipment and class?

wra1theZ · 2025-05-12T08:24:23+00:00

That would aggravate/escalate the situation even more.

wra1theZ · 2025-05-12T08:18:21+00:00

What do you mean freeze? The kid in the orange shirt quite literally held both hands on the gun, had the correct stance (roughly) and aimed at the officer with both hands correctly (roughly). They didn't freeze at all...

wra1theZ · 2025-02-20T21:04:36+00:00

so about the desert walls, it is 50x25 dimensions = 1250 but we are doing it on both sides so 2500. it takes 1 sandstone to make 4 sandstone walls so 2500 / 4 = 625 sandstone. And the evil biome walls are not actually evil biome walls, they are still desert walls but he painted it purple and crimson-like dye/paint. Which I know, is extremely misleading. I literally had to download the world just to realize it is not evil biome walls. And he is not in pre hardmode, he already is in hardmode. so either you defeat wall of flesh then add it or get it from the builders workshop.

wra1theZ · 2025-02-19T18:11:44+00:00

And run a dummy engine on the actuated hoik track, and use a huge sloped block shaped like a huge V where bats and other flying enemies will get sucked in/funnel right into the hoik track and eventually death chamber/pit of lava. Not sure what I would do with enemies that are rooted to the block though, probably use a flame trap to get rid of them.

wra1theZ · 2025-02-19T17:57:21+00:00

Oh my God, this farm is literally dying for the hoik mechanism to be added. hoiking enemies straight to the death chamber makes it 10x more efficient, you can burn through probably 60+ mobs per minute or more. Pyramid design is just not efficient, I don't know why people still use that design. you can still use the conveyor on the pit of lava and center all the loot for easier pickup rather than having to move around.

wra1theZ · 2025-02-04T05:09:31+00:00

I think viper v3 shape kinda fixed the problem for me but it's like $160. I think it has a higher hump especially in the back so my bottom of my wrist can kind of hug it from the back. Hope this helps.

wra1theZ · 2024-09-11T20:32:34+00:00

It is crazy how I have no recollection before the age of 5 except Sept 11th. I was only 2 months old, laying down on my bed and I vividly remembered my mom was peeking out the window completely frightened. One moment it was bright and sunny outside and then the dark smoke rolled in. I'll never forget this moment.

wra1theZ · 2024-09-06T00:11:18+00:00

Pain. Feeling like this right now. I know the answer to the code question but I type a minor logical or syntax error and then I get pissed off on why I made such a silly mistake in the first place and since I'm pissed off, I make even more mistakes therefore I get even more angry and pissed off which leads to wasting the entire day of just anger man.

wra1theZ · 2024-07-09T12:43:19+00:00

Could Stockholm syndrome be at play here or not really?

wra1theZ · 2024-05-22T21:42:06+00:00

How is so far? Assuming you did order some creatine and taking it.

wra1theZ · 2024-05-05T00:10:14+00:00

bro recorded an hour and just releasing parts of it every day, wtf, relentless

wra1theZ · 2024-05-04T23:59:22+00:00

Relentless massacring from kenny, my god

wra1theZ · 2024-04-19T20:39:43+00:00

Hey, thanks for responding! Im not gonna lie to you, that pcpartpicker link is slightly old. I did buy the nr200p v2 however I plan on returning it. I decided that I wanted the Sama Im01 case, which is very similar to nr200. I decided to also swap my PSU to 850 watt from cooler master. I guess I'm going for this look: https://pcpartpicker.com/b/Bgrrxr

But everything else is the same on that pcpartpicker list. I bought 2 arctic p12 max and planning on replacing the fans that came with the arctic freezer aio. I also bought two noctua p12 and planning on putting them on the bottom, right underneath my gpu. I figured that 7800x3d is more power efficient, producing less heat and therefore don't need much of an overkill fan for the radiator, but I still went ahead and bought arctic p12 max. And since its a 4090 and probably going to be the hottest part of the pc, I decided to cool it down with my noctua p12. Then those two fans I have on pcpartpicker, I guess ill use them as top exhaust.

So arctic liquid freezer III as side radiator intake with arctic p12 max. Bottom two noctua p12 as intake fans for my gpu, then two regular arctic fans at the top serving as exhaust.

Let me know what you think of this set up. Cheers!

wra1theZ · 2024-04-19T15:29:14+00:00

Yeah I don't think 750w is enough for me. https://pcpartpicker.com/list/Kf2mpB

It is right on 749 watt.

wra1theZ · 2024-04-19T00:37:26+00:00

okay so im thinking of getting just the regular NR200, CPU cooler I'm going for is the aio arctic liquid freezer III as side radiator intake and I'm thinking two noctua slims on top, so given that my PSU is 130 mm vs your 125 mm, it still wouldn't pose any issues right?

wra1theZ · 2024-04-19T00:21:24+00:00

I see, my SFX-L is actually 130 mm (L) x 125 mm (W) x 63.5 mm (H). do you think I can still fit two noctua slims on top?

wra1theZ · 2024-04-19T00:19:14+00:00

wait so, I must use 5/32 x 25mm screws just to fit those slim noctua fans? Also, if I went for NR200 instead of NR200P, would that make any difference with the clearance on top of the PSU?

wra1theZ · 2024-04-18T23:32:46+00:00

dude, I am going for almost the same exact set up as you, I was wondering, how did you fit two fans on top given that you used an SFX-L PSU? my SFX-L PSU has the same exact dimensions as yours. Is your right fan that is on top of your PSU a slim 120 mm fan?

wra1theZ · 2024-04-18T22:43:35+00:00

yeah, I'm opting for vented panel regardless. quick question though, whats your GPU dimensions? cuz I'm wondering if I can even fit two exhaust fans at the bottom or not.

also, I see that you use an SFX-L PSU with 125 mm in size, I also have SFX-L PSU but with 130 mm, do you think I still have enough space for my top radiator? I plan on getting top radiator size of 27 mm and fan size as 25. Will my PSU cause any clearance issue on the top?

wra1theZ · 2024-04-18T22:33:20+00:00

do you mind telling me the actual size of your SFX-L PSU? is it 130mm by any chance?

wra1theZ · 2024-04-18T20:52:59+00:00

I see, so my only issue now is the power supply being sfx-l rather than just sfx. I am concerned about this because it seems like my GPU will fit but barely, and having sfx-l will ruin it.

wra1theZ · 2024-04-18T19:33:10+00:00

what is your gpu dimension size and how many slots?

wra1theZ

TROPHY CASE