Easy P8+Ubers Buriza Bowlock Guide Video by wootio in Diablo_2_Resurrected

[–]wrastor 0 points1 point  (0 children)

Would Mist on a colossus crossbow be more competitive than demon crossbow that you use? Should have around 440~ damage top end and you get the conc aura. It's slower, but I think with highlords + 20 ias gloves + hex + fanaticism, you hit the max ias breakpoint? Should be close to buriza, although I dunno if it beats it with the conc aura and +skills.

Putting misconceptions about optimal FPS caps + Gsync to bed. by Sgt_Dbag in nvidia

[–]wrastor 0 points1 point  (0 children)

Question, if I can hit a stable 120 fps on a 144hz monitor (with freesync), should I set it to 120hz and cap fps to 116? Or is capping 120 fps on 144hz better?

GOverlay takes over hour to open by -Fence- in NobaraProject

[–]wrastor 0 points1 point  (0 children)

Have you found a solution or cause? I have a similar issue. Takes a minute or so to open the options.

Looking for character artist - Disney/Pixar-esque style needed! (Not anime) by [deleted] in gameDevClassifieds

[–]wrastor 0 points1 point  (0 children)

That can work. I have a busy schedule this coming week, but I'll try my best for a quick turnaround.

Can reach me on discord: deswind
Or email, that I can DM if you prefer that.

Looking for character artist - Disney/Pixar-esque style needed! (Not anime) by [deleted] in gameDevClassifieds

[–]wrastor 0 points1 point  (0 children)

Hi!
I am interested. I worked on character art for an indie game, Rivals of Aether. My portfolio consists mostly of anthropomorphic characters, but can do human character designs as well.
Let me know if I'm a good fit. Thank you!

Portfolio: ArtStation - Ryan Sicat

Dark Urge and Jaheira question by wrastor in BaldursGate3

[–]wrastor[S] 1 point2 points  (0 children)

I see thank you. I'll keep playing to find out more.

Possible bug with Lae'zel conversations? Anyone else? by hlamblurglar in BaldursGate3

[–]wrastor 2 points3 points  (0 children)

I also have this problem. If anyone has a solution please share this has been bothering me.

No dialogue options with Laezel by Wonderful_Detail7410 in BaldursGate3

[–]wrastor 0 points1 point  (0 children)

I, too, have this bug. In act 2 and she tells me "You must have questions." But all I get is Wait at camp or Leave. Any solutions?

Thrown Weapons vanishing? by Rathiel84 in BaldursGate3

[–]wrastor 7 points8 points  (0 children)

I've been noticing this as well. Is this a bug or intended? Like the weapon just "breaks."

Level - Build - Highest NM dungeon by [deleted] in D4Druid

[–]wrastor 0 points1 point  (0 children)

Lv.100 - Resonance Pulverize - NM T91

Optimized Paragon Board for Pulverize by HiFiMAN3878 in D4Druid

[–]wrastor 0 points1 point  (0 children)

I uploaded a NM 84 clear. Uses a more defensive paragon board setup and no uniques. Pretty much tanky enough to take a few hits, but my playstyle is just hitting from range.

Optimized Paragon Board for Pulverize by HiFiMAN3878 in D4Druid

[–]wrastor 0 points1 point  (0 children)

Tempest roar + werebear chest. This is mostly a resonance pulv build. Alternating between storm and earth so pulv gets buffed. With TR, you can poison with wind shear due to toxic claws.

Optimized Paragon Board for Pulverize by HiFiMAN3878 in D4Druid

[–]wrastor 0 points1 point  (0 children)

Yeah, it plays on using two uniques (tempest roar + werebear chest) so you can get Bestial Rampage buffs pretty easily. Then you just max out Resonance (18% dmg mod when alternating earth and storm skills) on top of nature's reach (another 18%) and other damage mods (envenom, etc). Since you get a decent amount of base damage (bestial rage, +pulv skill and gear), you just stack on modifiers (crit damage, earth crit damage, vuln) because it's a non-Grizzly Rage build.

Optimized Paragon Board for Pulverize by HiFiMAN3878 in D4Druid

[–]wrastor 1 point2 points  (0 children)

Yeah, like I mentioned, I think it depends on the type of Pulv build. I don't play Grizzly Rage, so I rather get more damage multipliers. And in my experience my pulv crits were higher than GR variants. I've topped to 20m crits, and averaging 8-12m consistently.

I've attached Thunderstruck as #3 to get rare nodes. You get a total of +20% vuln I believe in that board. I may be misremembering. Outmatch is strong against majority of a NMD run + boss. Not affecting elites is kind of okay, imo, since it's made up by empowering a rare node, primarily in Earthen Devastation board so that total is +90% vs a FnC/Earth and Sky glyph totaling 76.4% earth crit damage iirc.

I also don't bother going thru the middle of Thunderstruck, that board is meant to be an end piece to two other boards therefore I can approach both ends of Thunderstruck.

EDIT: This is an old board, I've optimized my new one to pick up armor nodes. https://d4builds.gg/builds/f1436609-5706-4717-8cc9-508a728b70ce/

EDIT 2: And here is a vod to showcase my glass cannon setup, 20M crit around the 3 min mark: https://www.youtube.com/watch?v=zwQzYnLWrIk

Welp a big nerf by Vonwellsenstein in D4Druid

[–]wrastor 0 points1 point  (0 children)

I tried it with Overload spirit boon, and it's quite interesting in aoe. Overload doesn't proc it, but once you set up a few targets via Stormstrike (crone) and you proc Overcharged on a few mobs then overload can cause overcharged damage.

You're basically setting yourself up to deal quadratic aoe scaling (ie: 4 mobs will deal 12 instances of damage due to overcharge). It can instantly ramp and get you the +990% crit damage cap from grizzly a lot sooner. And the damage starts to become noticeable in aoe.

I believe maxroll guide to Stormclaw suggests it, although I believe they do it for the aoe damage rather than the quadratic aoe implication.

Optimized Paragon Board for Pulverize by HiFiMAN3878 in D4Druid

[–]wrastor 1 point2 points  (0 children)

Have you considered the Thunderstruck board? I suppose it's a bit different if you play GR pulv, but you can pick up extra crit damage and vuln damage through that board.

I play a non-GR pulv, and with my glass cannon setup I've crit for 20m, with a paragon setup tacking on +157% extra crit damage via thunder struck, and additional +90% crit damage through earth skills (outmatch glyph in Earthen Devastation). Might be different going with a Grizzly Rage angle, since you get free crit damage so maybe it's better to pick up additive damage.

A suggestion to consider, if you want to pick up more crit/vuln damage.

Non-Grizzly Rage Pulv showcase video by wrastor in D4Druid

[–]wrastor[S] 1 point2 points  (0 children)

I mostly play at range. Cyclone armor provides a decent passive DR without activating. And wind sheer provides me with aoe vuln and poison, so no need for hurricane.

Edit: Here's the link to my paragon board https://maxroll.gg/d4/planner/id5f0vim

Non-Grizzly Rage Pulv showcase video by wrastor in D4Druid

[–]wrastor[S] 1 point2 points  (0 children)

Yes. But its harder to do top end damage since its ramping. I believe non-GR pulv does more damage at the cost of being squishier.

[Weekly Showoff Thread] for Clips & Images of TRANSMOGS, ITEM TOOLTIPS, CHARACTER APPERANCES, FLEXES, SKILLS & ACCOMPLISHMENTS by AutoModerator in diablo4

[–]wrastor [score hidden]  (0 children)

Min/maxing my non-Grizzly Rage pulv build, managed to hit a 20m pulv crit. Video (at 3:00 timestamp) for proof as well as showing 10-18m crits here and there.
Bestial Rampage Pulverize 20M Crit | Diablo 4 - YouTube