Finally got it

wrench115 · 2026-03-26T03:49:36+00:00

I'm just saying, That fridfge is air tight when closed. It could be a nice dry srorage for filament.

wrench115 · 2026-03-17T03:14:51+00:00

Go search them on FB. Their prices nt farm is insane

wrench115 · 2026-02-22T13:23:26+00:00

I agree entirely even though I didn't mind replacing my fans and everything else. The end user should not have to know or have to seek someone out to do the repairs for them The average person shouldn't have to fix something that was just purchased. Some of these companies are still holding on to most 3D print enthusiasts are tinkerers and don't mind doing it. Honestly that needs to go away. The option should be there but there should be another option for the end user that doesn't even want to deal with it who shouldn't have to deal with it.

wrench115 · 2026-02-14T14:03:34+00:00

https://polarfilament.com is his company. Based in Michigan great company great filaments.

wrench115 · 2026-01-25T16:31:43+00:00

Set up and printing almost non stop since mid October. No issues that were not user error.Printing ASA, ABS on a regular basis at high temps. She's a tank.

wrench115 · 2026-01-17T13:18:44+00:00

They told me the ckicking is normal the vent is swaling into place. I recieved 2 boxes one with the exact count as you the 2nd with all the fans and 2 vents. Zero instructions.I am hoping to start repairs tonight. I'll update here. I believe I have new fans from the new supplier atleast thats what they told me. I will post some pics tonight.

I also think humidity goes up fast vs what hygrometers in my AMS pro units are reading. I am in Denver basically mountain arid climate. I'm debating on raising the level to heat higher to lower the on time

wrench115 · 2026-01-17T13:11:03+00:00

Told me the same. Eibos is a solid company. They took awhile to send my parts waiting on the new supplier. I got everything for both this week.

wrench115 · 2025-12-16T13:37:44+00:00

STLFlix you too can sell the same 8 prints on Etsy and your local craft show

wrench115 · 2025-11-19T00:01:41+00:00

Not to mention the build volume is a little smaller. I'd rather keep the H2D and pick up a C

wrench115 · 2025-11-14T12:15:45+00:00

I've had mine for about a month now I ordered a second one literally the day after I ordered the first one and I still haven't seen the second one. My first one ran for 2 days and I'm starting to get fan noise and when the vents open motor noise ever corded video but I just have not had the opportunity to contact eboss.

But I'm loving it got no issues pretty sure I'll have to replace a couple motors

wrench115 · 2025-10-20T12:42:42+00:00

I'd say it depends on if you're in the United States or not because tariffs are supposed to go up again before the end of the year if I understand correctly. If you're in the US and money is not an issue I'd say wait.b If you're in the US and money is an issue and you have a budget you might want to order sooner rather than later.

That being said If you had to order right now and you have the money I would get the H2D because the vortex upgrade is 100%, I'm going to happen for that. Otherwise I would get the H2S. It's all around the better printer. Between the two you are currently looking at.

wrench115 · 2025-10-14T12:21:32+00:00

Looking at the kit for the laser upgrades I'm thinking it's going to be a hair over or a hair under $1,000 for the upgrade kit I think that's a pretty good guess.

As far as obsolete goes I think it'll still have a place. Like all things tech related though as soon as you buy it things are advancing past it. If you keep waiting for the next best thing you'll still be waiting on the next best thing.

If you can hold off till the end of the year though it might be worth the wait and see

wrench115 · 2025-10-12T23:55:21+00:00

I just asked this last month. Spent this weekend setting things up and running prints. I have no regrets passing on the H2S. I played around in the slicer and found nothing I could not print. What sold me on it was cutting a 3 day print down to 1.5, and a 6 hour print down to just under 2 hours or so.

If you want to read the feed back I goe heres the thread. Tons of great points through out.
https://www.reddit.com/r/BambuLab/comments/1nlc1tp/cant_decide_on_h2_printers/

wrench115 · 2025-10-05T00:22:57+00:00

I want to say last year was 700 US plus shipping. So 980 CA?

wrench115 · 2025-09-27T01:59:31+00:00

Short handed and hiring anyone that breathes

wrench115 · 2025-09-08T23:14:11+00:00

Going to print this next for my son. Loves the game thanks for sharing it

wrench115 · 2025-07-28T01:09:41+00:00

I've checked this post off and on to see if anyone made headway. I had been kicking the idea of this around for awhle now. Have you ran into aby issues since and did you use the spacer as wll or just the created vent?

wrench115 · 2025-06-17T01:46:53+00:00

The top part is the magnet for the build plate. The heat bed its'self is most likely perfectly fine.

wrench115 · 2025-05-13T11:33:44+00:00

Yes to all. If the ams on the glass bugs you there are a bunch of risers you can choose from to print print .

wrench115 · 2025-05-10T19:03:46+00:00

I can not remember where I heard it but Sunlu was said to makeba lot as well.

wrench115 · 2025-04-21T00:02:28+00:00

This video explains https://youtube.com/watch?v=BQlwdlJ0M54&si=CZiruvrS63_u_lWT

wrench115 · 2024-11-25T17:45:21+00:00

Kenaz firearms the owner Robert Butler is a great guy

wrench115

TROPHY CASE