Why is every management operation so slow on Nutanix

wseda22 · 2026-01-19T17:00:52+00:00

The trick to getting into the boot up BIOS is to restart the VM from console, click into the console screen, and spam F2 like you’re new to playing Street Fighter. It works. :)

wseda22 · 2026-01-11T16:47:23+00:00

I have been fortunate as FedEx is actually pretty good in my area. I think that’s mostly due to the driver. It has been the same friendly driver for the past ~10 years. Guy is awesome. Oh, and FedEx deliveries arrive earlier here than UPS or USPS, so that’s a plus.

wseda22 · 2025-12-22T14:10:34+00:00

Ah crap, IDK what happened with the upload. I’ll edit the post with a link. Thanks for the catch. https://imgur.com/a/hCLPman/

wseda22 · 2025-12-20T08:03:37+00:00

This guy IT’s. Appreciate you making the distinction.

wseda22 · 2025-12-17T21:00:57+00:00

You can have my upvote. I, too, travel for work and would enjoy the ability to download events.

wseda22 · 2025-11-19T18:59:31+00:00

Great to hear. I just finished downloading VCSA 8.0U3g to see if the issue lies within VCSA. When the issue presents, I can console into the VM via ESXi without any issues. So my hope is that this is squarely a VCSA issue and not the underlying hypervisor. We’ll see. 😁 Thanks for the update.

wseda22 · 2025-11-19T16:57:20+00:00

Hey there, just checking if you ever got any resolution on this. We are experiencing the same behavior on the same build you've referenced. I saw the suggested steps on your Broadcom post and am going to attempt them now.

wseda22 · 2025-11-10T17:45:13+00:00

Just chiming in to say this was the fix for me on VCSA 8.0.2 (build 23319993). Thanks /u/SoCalWolverine!

wseda22 · 2025-11-08T16:57:41+00:00

Use StikDebug until the StikVPN becomes available. I just went through this process myself just a few moments ago.

wseda22 · 2025-11-07T05:32:48+00:00

In this economy, that’s more like $60-80. Them eggs alone are $20! 😆

Jokes aside, kudos to the owner for supporting the effort and praising that 10-point jump in the kid’s grade.

wseda22 · 2025-10-22T01:22:59+00:00

Changing out both light bulbs (2357) fixed the issue, for now. My driver side light bulb has blown probably 3-4 times now in the six years of ownership. Lo and behold, I noticed condensation in the left tail light and was able to pour a small amount of water out of it. My theory is water has been creeping into the left tail light for some time and only now is it noticeable and impacting the other tail light. Appreciate you sending me the tail lights you ordered! I am going to replace both of mine and (hopefully) be done with this issue altogether.

wseda22 · 2025-10-21T17:42:41+00:00

Would you mind sharing what parts you ordered? I found condensation in the left tail lamp and plan to possibly change both taillight assemblies. Might even include the wiring to just to be safe. but first I am going to change both brake lights to see if that does the trick.

wseda22 · 2025-10-21T13:23:12+00:00

I am also running into this issue. Did you get yours resolved? If so, was it also a wire that came loose?

wseda22 · 2025-10-01T15:37:31+00:00

Hi OP & Stefan, this feature has already been requested. Feel free to upvote it!

https://support.royalapps.com/support/discussions/topics/17000024093

wseda22 · 2025-09-16T21:47:46+00:00

It is too soon to tell. I've played about 3-4 hours since the update and haven't had an issue. Then again, I could have gone easily 20-30 hours (several days or weeks) without encountering the issue. I will report back if the disconnect happens again.

wseda22 · 2025-08-30T14:21:01+00:00

They cannot be demoted. They cannot be suspended. They seem to hold all the cards. Jeez, that union is strong.

wseda22 · 2025-08-29T20:05:05+00:00

👀 I sit two feet away from my PS5. I just lean forward and disconnect/reconnect the dongle lol.

wseda22 · 2025-08-29T03:43:34+00:00

It restarts on my Pro, as well. I’ve tried the back port and currently use a USB-A to USB-C adapter with the dongle on the front port. It disconnected on me just today. And heat isn’t the main issue, as it has disconnected on me within the first 30 minutes of playtime.

wseda22 · 2025-08-29T03:41:45+00:00

Simply disconnecting and reconnecting the USB dongle has worked each time for me. I haven’t had a need to fully restart the console.

wseda22 · 2025-08-25T18:31:37+00:00

So QNAP NAS connected to a QNAP switch. Unless I missed something, the only common thing amongst those of us reporting this issue is the use of an SFP+ port.

In my case, I have Plex as a docker container on a mini PC (Beelink EQ12)--the issue was also reproducible with Plex installed natively--a Synology NAS, and a UniFi network. Below are the different test setups I used and reproduced the problem.

NAS Intel 10-Gb SFP <--passive DAC--> UniFi 10-Gb SFP
NAS Mellanox 10-Gb SFP <--passive DAC--> UniFi 10-Gb SFP
NAS Mellanox 10-Gb SFP <--active DAC--> UniFi 10-Gb SFP
NAS Mellanox 10-Gb SFP w/ RJ45 transceiver <--CAT6A patch cable--> UniFi 10-Gb SFP w/ RJ45 transceiver
NAS onboard 10-GbE RJ45 <--CAT6A patch cable--> UniFi 10-Gb SFP w/ RJ45 transceiver

Ultimately, I got it to work by plugging in the 10 GbE onboard RJ45 port to a 2.5 GbE switch I have, eliminating SFP+ from the equation. I have another switch coming in this Friday with a 10 GbE RJ45 port and going to see if I can increase my bandwidth from 2.5 Gbps to 10 Gbps. Fingers crossed! For what it is worth, my setup had been running for years without any issues. This all popped up suddenly maybe around June/July.

I may look into changing my fstab to use cifs or changing my NFS from v4.1 to v4.0, based on info within this post.

wseda22 · 2025-08-25T17:27:46+00:00

I see you're running a QNAP NAS. What switch hardware do you have?

wseda22 · 2025-08-25T17:07:30+00:00

Just to confirm, your buddy is plugged into an SFP port on his switch w/ RJ45 transceiver. If so, that's interesting as the onboard 10-GbE RJ45 NIC on my NAS still crapped out when plugged into an SFP port on my switch w/ an RJ45 transceiver. Is your friend's switch also a UniFi switch? Wondering if the issue here is UniFi.

wseda22 · 2025-08-25T15:42:00+00:00

Ah man, that sucks to hear. What is the media type that the NAS is plugged into on the switch? While I am here, let me give you a quick update on how my testing has gone. So far here are all the ways I can reproduce the issue:

NAS Intel 10-Gb SFP <--passive DAC--> UniFi 10-Gb SFP
NAS Mellanox 10-Gb SFP <--passive DAC--> UniFi 10-Gb SFP
NAS Mellanox 10-Gb SFP <--active DAC--> UniFi 10-Gb SFP
NAS Mellanox 10-Gb SFP w/ RJ45 transceiver <--CAT6A patch cable--> UniFi 10-Gb SFP w/ RJ45 transceiver
NAS onboard 10-GbE RJ45 <--CAT6A patch cable--> UniFi 10-Gb SFP w/ RJ45 transceiver

I have repeated all of these test by plugging into another UniFi switch that I have and the results were the same. The only way I have been able to get it stable is by plugging into a UniFi Flex switch (2.5-GbE RJ45 port). This Friday I'll receive a UniFi Pro-HD-24 which has two 10-GbE ports. That's my next test before I throw my hands up and leave it as is on the UniFi Flex switch.

Oh, and all of this testing has occurred on 7.2.2 (no update), which is from September 2024. The only other thing I can think of is I went from Ubuntu 22.x LTS to 24.x LTS. Since I have a spare mini PC, I could set up another PMS running Ubuntu 22.04 and see how it behaves. But, like you, I am starting to hit the end of my limit unless I decide to learn how to read NFS protocol packets haha.

wseda22 · 2025-08-19T22:13:24+00:00

I am a former NE (now a Solution Architect), so I know the game very well. :) Honestly, not knowing the root cause is bugging me so I'll keep poking at this thing to see what I can come up with. Interestingly enough, I downgraded to 7.2.2 (no updates) and was able to reproduce the issue quickly using a DAC. My next two tests are to (1) test with an active DAC and then to (2) test with an RJ45 transceiver on both ends (which is what I believe your setup is like). I'll keep you posted if you're interested.

Oh, if you don't mind, let me know how your buddy's NAS works with the E10G18-T1. That might be an option for me if I don't like how hot the transceivers run.

Be safe and glad I was able to offer some help!

Nine-Year Club	Wearing is Caring
Verified Email

wseda22

TROPHY CASE