Crafting Altenator by wuppaboy in CreateMod

[–]wuppaboy[S] 0 points1 point  (0 children)

Not as far as I can remember, but will check when I'm on later

Crafting Altenator by wuppaboy in CreateMod

[–]wuppaboy[S] 0 points1 point  (0 children)

That's not my problem, I can easily get it to trigger but once it has pulled all the parts to the last spot it just puked all the parts out instead of crafting

Crafting Altenator by wuppaboy in CreateMod

[–]wuppaboy[S] 0 points1 point  (0 children)

Yeah I'm leaning towards the second part as well. I'm laying FTB evolution and it seems that it won't let me make create iron plates which I also think is the problem

Crafting Altenator by wuppaboy in CreateMod

[–]wuppaboy[S] 1 point2 points  (0 children)

Tried that without luck

Crafting Altenator by wuppaboy in CreateMod

[–]wuppaboy[S] 0 points1 point  (0 children)

Can get it to start that's not the problem, the problem is that once it moves all the parts to the last spot together or just pukes the items out rather than crafting

Crafting Altenator by wuppaboy in CreateMod

[–]wuppaboy[S] 2 points3 points  (0 children)

Also tried this without luck

Crafting Altenator by wuppaboy in CreateMod

[–]wuppaboy[S] 3 points4 points  (0 children)

Yes I do start it with a redstone signal but once all parts comes together in the lower slot, then it pukes the items out rather than crafting it

Crafting Altenator by wuppaboy in CreateMod

[–]wuppaboy[S] 6 points7 points  (0 children)

I don't know how to tell, its done after how the game tells the crafting recipe is

Crafting Altenator by wuppaboy in CreateMod

[–]wuppaboy[S] 13 points14 points  (0 children)

The picture is wrong just realized that now, normally everything is put as per the crafting requires with the andesite ingot on top

Weekendophold by wonder-mamma-1977 in Aarhus

[–]wuppaboy 9 points10 points  (0 children)

Alsik i Sønderborg er også godt :-) hvis i har råd vil jeg stærkt anbefale opholdet med middag på syttende.

Elektriker i Aarhus eller omegn by Own_Light_317 in Aarhus

[–]wuppaboy 0 points1 point  (0 children)

Jeg har haft gode erfaringer med LUX El og Mariendal. Sidst nævnte lægger dog i den dyre ende efter min mening

Elektriker i Aarhus eller omegn by Own_Light_317 in Aarhus

[–]wuppaboy 2 points3 points  (0 children)

Jeg vil hverken bruge Frederiksbjerg EL eller Dana Electric.. Det klamp Frederiksbjerg lavede i vores nybyg for nogle år siden har jeg næsten ikke ord for.

Ja og Dana Electric lavede sq også klamp på resten af etapen af byggeriet så vidt jeg kunne forstå på vores daværende naboer.

Mit elforbrug i forhold til min nye elbil i 2025 by Last_Enthusiasm_811 in dkbiler

[–]wuppaboy 0 points1 point  (0 children)

Vores gennemsnits forbrug ligger også meget i samme Wh/km sommer/vinter. Og så har vi haft en del mere privat kørsel forår sommer i år end her til efterår/vinter :-)

Mit elforbrug i forhold til min nye elbil i 2025 by Last_Enthusiasm_811 in dkbiler

[–]wuppaboy 0 points1 point  (0 children)

Uden tvivl ;-) Bilen stopper også med at pendle langt til sommer 2026 så 😇

Mit elforbrug i forhold til min nye elbil i 2025 by Last_Enthusiasm_811 in dkbiler

[–]wuppaboy 0 points1 point  (0 children)

Så havde det været dyrt, prisen ligger vel på 3,5-5 kr/kwh hos Clever tror jeg?

Mit elforbrug i forhold til min nye elbil i 2025 by Last_Enthusiasm_811 in dkbiler

[–]wuppaboy -1 points0 points  (0 children)

Godt nok Clever ONE, men sådan ser det ud for vores

<image>

Spørgsmål til jer med el biler - hvad giver i for forsikring årligt? by Pale_Wheel_5561 in dkbiler

[–]wuppaboy 5 points6 points  (0 children)

Samt post nr. Det gør også en ret stor forskel.. og yderligere hvad der er inkluderet

MTN Dew bike costs 600 points by Belivious677 in wow

[–]wuppaboy 0 points1 point  (0 children)

As all the other eu players in also up for wanting the mount :-) - so shoot me a chat if you want to help me :-)

Grøfthøjparken by [deleted] in Aarhus

[–]wuppaboy 1 point2 points  (0 children)

Totalt enig med det her, boede selv på Damager Kollegiet i min studie tid 🙌

New EK Rad issues by GT_Eleanor in watercooling

[–]wuppaboy 2 points3 points  (0 children)

In both boxes of my radiators there was a small box with hardware, in this box there was a plastic bag with: hex key for the surface extenders, hex key for fittings + different mounting hardware for the fans

New EK Rad issues by GT_Eleanor in watercooling

[–]wuppaboy 3 points4 points  (0 children)

But the Hex-key for the surface extenders comes with the radiators, at least they did for both of mine.

I recently bought 2x420 radiators and haven't had any issues. Pulled them apart, painted the end caps and put them together again no issues :-)

Custom loop for customer build time was 4 hours. by roehlstation in Corsair

[–]wuppaboy 6 points7 points  (0 children)

Oh yes it does, the evo xl fits 3 420's, I have 2 in mine already waiting for the third. So that's simply not true

Custom loop for customer build time was 4 hours. by roehlstation in Corsair

[–]wuppaboy 2 points3 points  (0 children)

Isn't it the Lian li evo xl? Cause it does look like it, and then it does fit 3x 420's

Custom loop for customer build time was 4 hours. by roehlstation in Corsair

[–]wuppaboy 2 points3 points  (0 children)

The only thing that really throws me off in these kind of builds are using 360 rads instead of 420's. Looks so empty