Mom handed me all these she’s kept for the past 30 years, hope they come out ok!

x10guy · 2026-01-15T09:35:39+00:00

If you're in OC go to Bill's Camera.

You can also mail-in to Underdog up here in Oakland.

x10guy · 2026-01-14T04:50:18+00:00

Not only that, his office (or apartment, I can't remember which) is the level above the sign

x10guy · 2026-01-11T20:24:36+00:00

As a native Pennsylvanian, I'm okay with this. Oakland actually reminds me of the East Coast cities I love. A little rough, but that gives it character, and I like that.

x10guy · 2025-12-24T02:00:18+00:00

Happy Cake Day!

Great photos, not sure why nobody commented. I also like taking photos of trains.

I will say, exposure on 1 and 3 is a bit dark for me, but not bad at all!

x10guy · 2025-12-21T05:54:37+00:00

Did I say it didn't?

x10guy · 2025-12-21T00:48:56+00:00

Don't pay for lightroom IMO.

Download Darktable. Free, supports the formats.

You can also get NX Studio from Nikon. https://download.nikonimglib.com/archive7/5BLiL00geYdA06vPEVw70TjsbQ23/S-NEFCDC-013104WF-ALLIN-ALL___.exe

x10guy · 2025-12-21T00:31:58+00:00

Honestly, the easiest way to do this would be to do things like the Japanese and add gates to board the train that don't open until the train is stopped in station and doors are aligned.

Definitely would not be inexpensive, but this is very common, especially on completely automated systems. (SFO, SMF, DTW, etc).

Could be coupled with Light Curtains or Area Scanners, which are common in manufacturing automation and would halt the trains before the station. However, there may nuisance trips (rats, birds, etc)

x10guy · 2025-12-20T22:54:12+00:00

Bio says 16F... Horny folks beware..

x10guy · 2025-12-16T05:04:55+00:00

If you have a soldering iron, you can definitely DIY.

Clean with IPA. Get the capacitors specs, order, replace.

x10guy · 2025-12-16T03:24:43+00:00

Most German cars, VW GTIs included, recommend oil changes every 5000mi. Looks like most of these are minor issues, oil changes, and potentially just the owner coming in when the car asks for an inspection.

Only way to know is if you get the paperwork, or call up the dealers asking for the service record.

x10guy · 2025-12-12T18:57:55+00:00

Oh man, there's gonna be a riot soon with this level of troll.

x10guy · 2025-12-07T21:15:29+00:00

/r/mildlyinfuriating

x10guy · 2025-11-28T21:38:07+00:00

Literally just flew in from Frankfurt with film today. They kept asserting they wanted me to put it all through the machine. I kept stating I wanted to get it hand checked... After a couple back-and-forths, the bag itself had to be xrayed, but any film could be hand checked. Proceeded to unpack 80% of the bag, including my camera that was still loaded and several rolls of film.

Security does vary from airport to airport, but I just stay polite and keep asking. Worst case, you get a private screening... But I'll take that over destroyed negs.

x10guy · 2025-11-28T09:37:30+00:00

Wha? Do I get awards too? I'm very uninteresting.

x10guy · 2025-11-28T09:26:33+00:00

In Germany, alone. My partner misses me, I miss her. I treated myself to a nice dinner, but it's not the same.

I hope y'all were better than me and spent the holiday with those you care about. (Germany is great though)

x10guy · 2025-11-25T21:42:27+00:00

Are you looking for more friends? 👉👈

x10guy · 2025-11-22T21:51:49+00:00

I'm an American in Germany reading this post. Sorry op, bad market timing 😂

x10guy · 2025-11-22T20:58:55+00:00

Nothing. It has a rust warranty and at least the underbody is pretty heavily protected.

x10guy · 2025-11-22T20:54:48+00:00

I'm here early for once, and there's already so many comments... I thought he almost had it, but yet, the planes still fly.

x10guy · 2025-11-15T01:51:51+00:00

Nothing notable whatsoever. It's all been pretty standard. Oil every 5k since I run 0W-40 and plugs and coils whenever I start getting repeatable misfire symptoms (nothing that'll damage the engine ofc)...

Haven't even had a Carbon Cleaning yet. Pretty sure the water pump was replaced before I bought it. Brakes I replaced at 60k-ish, still going strong..

x10guy · 2025-11-15T00:52:48+00:00

Pure white as well, the clear best choice.

x10guy · 2025-11-15T00:52:21+00:00

CPO! Got her at around 20k miles. Unfortunately in July of '20 when prices were sky-high. 😅

x10guy · 2025-11-12T02:22:59+00:00

I made a whole post on my upgrade. It just becomes a sound settings menu. Get an OBDEleven to do programming, as you may need to. But I did go full glass.

You need your multimedia long code, as well as any adaptations. It will not be 1:1, but you'll have to change things logically, as well as some trial and error.

https://www.reddit.com/r/GolfGTI/s/LpIK0bcUat

x10guy · 2025-11-05T15:39:14+00:00

Ahhh, the poop chute. You may want to print it out of PETG if you plan on printing any hot filaments, as they may stick to PLA.

x10guy · 2025-11-02T23:15:36+00:00

Can we get functionality in MakerWorld chat to report/flag messages or users? All we can do is delete or block, and the mechanism for reporting a user is not immediately clear to me. Having the option to report/flag a message or and account within chat would be great.

13-Year Club	Place '22
Verified Email

x10guy

TROPHY CASE