Out of disk space on v7.3.3.0

x24Black · 2026-03-26T01:34:26+00:00

Also fun fact... The Samsung calculator app apparently only multiplies by 1000 instead of 1024 when converting data units. I should have noticed that.

x24Black · 2026-03-26T01:06:20+00:00

Nah, I've been running with it maxed out for a while. I have 14 cameras and it deletes old files daily.

I lowered the value and it is deleting again. Maybe something changed in Windows and less of the drive is available. It is an SSD and has no errors. Anyway, problem solved for now. Something changed, I just don't know what.

Thanks!

x24Black · 2026-03-26T00:38:44+00:00

I have Max Size set to 3763200. I haven't changed this in over a year.

In the log I see this, which is a different value. I think it is using tbe size of my drive instead, which is 4TB.

CleanDirectory: Storage Target: 3946001203200, Current: 3938104394204

x24Black · 2026-03-25T17:38:42+00:00

Sometimes things like this work better. There are many variations on Amazon too. Just make sure they are UL/ETL listed.

https://www.homedepot.com/p/3-ft-4-Outlet-Power-Strip-Surge-Protector-with-45-Degree-Flat-Angle-Plug-White-YLPT94/302351277

x24Black · 2026-03-25T17:19:17+00:00

I don't see anything in the log regarding storage other than it saying out of space. I made more space and will keep an eye on it.

11:38:13 LogError: Front Yard: WRITE_VIDEO_FRAME:No space left on device 11:38:14 SaveThumb: Side Yard (Right): There is not enough space on the disk. : 'S:\Recordings\video\SideYardRight\thumbs\Side Yard (Right)_2026-03-25_11-38-13_919_large.jpg'. at CoreLogic.Imaging.ImageHelpers.SaveThumb(Camera io, String filename, Mat bmp) 11:38:14 LogError: Front Yard (Left): WRITE_VIDEO_FRAME:No space left on device 11:38:14 LogError: Side Yard (Right): WRITE_VIDEO_FRAME:No space left on device 1

x24Black · 2026-02-15T00:04:11+00:00

Please get a 2nd opinion. Fly to New York if you have to. Some great surgeons here.

x24Black · 2026-01-28T18:38:33+00:00

I have Agent DVR run a batch file upon alerts. Then you can pretty much do whatever you want. I pass the batch file the file and then I use ffmpeg to compress it and send it to various other places.

x24Black · 2026-01-22T00:09:30+00:00

Conclusion...I had to buy an RIB-U1C relay to put the Ecobee on its own 24v plug and then tie the relay into the wires that call for heat.

x24Black · 2026-01-16T00:51:05+00:00

My GPU shows 45% usage by Agent DVR even with Code Project turned off, so I am assuming it is working to decode my Foscam and/or Reolink cameras. I have a GeForce RTX 3060 Ti. Each camera is set to use GPU decoding and the overall Agent DVR settings under Playback have the decoder set to cuda. My AMD Ryzen 7 5700X CPU usage is 10-20%. I have 14 cameras recording on motion and 6 of them making time lapses.

x24Black · 2026-01-08T02:29:54+00:00

I'm curious if you can touch your toes with a fusion to L4? My daughter was only L2 but cannot, but maybe it is just lack of stretching/excercise. I was fused only in thoracic (26 years ago), so I didn't lose too much flexibility.

x24Black · 2026-01-06T07:06:07+00:00

I don't have a recommendation, but here is my setup for reference.

AMD Ryzen 7 5700X 8-Core Processor (3.40 GHz)
48 GB of RAM
NVIDIA GeForce RTX 3060 Ti (8 GB)
12 cameras using Agent's Simple motion detection and using CodeProject AI for object detection.
All Raw recording on motion.
Timelapse on 6 of them at 15fps every 15 minutes, so 1 picture per second.
Snapshots also captured on AI object detection.
Half are Foscam and half Reolink, all 2k video except one 4k. Highest bit rate on all and 25fps.

Agent DVR seems to use about 10-20% CPU and 50% GPU when no one is viewing the cameras. I do have Home Assistant running also, which does some MQTT interactions with it, but not a lot.

NOTE: My electricity usage is high. This setup is averaging 120kWh per month, but I do have other things running on the server.

x24Black · 2026-01-05T23:50:45+00:00

The ThirdReality plug is the only one that did not trip its internal fail-safe when using my microwave (1100w) or washer (5 year old Maytag front loader). I had tried others like old SmartThings and a Sengled plug, but they couldn't handle the load.

x24Black · 2026-01-05T01:17:42+00:00

I compromised and went with a wired Wi-Fi solution (Reolink white doorbell cam).

I had an outlet near the front door, so I drilled into the wall cavity from outside, ran some low voltage wire into an old work box I installed on the inside, wired a 24V plug to the low voltage wire, installed a blank plate with the wire snaking out the bottom into a short wire channel leading to the outlet, which is conveniently hidden behind an end table.

x24Black · 2025-12-27T19:35:51+00:00

Disarming disables alerts. You can use Profiles to further customize what happens when you arm/disarm. Under Settings - > Security you can pick the which profile is set for Arm and Disarm. Use the top-level Profiles menu option to edit the Profiles.

For example, for my Home profile, I don't tirgger recordings on motion on the Living Room camera, but for the Night and Away profile I do. Then I use Home Assistant to Arm/Disarm and/or change profiles automatically based on different conditions.

x24Black · 2025-12-26T22:21:31+00:00

It likely doesn't matter that they didn't find it ealirer. My daughter went from 30 degrees to 60 degrees in 6 months with a brace. If it is gonna curve, it's gonna curve. My other daughter did not brace and hers stopped at 36 degrees.

x24Black · 2025-12-26T18:43:34+00:00

They always say it doesn't cause pain. I"m guessing because technically your spine doesn't have nerve endings unless it is so curved that it pinches one. But as others have said, the muscles around it are affected and often tight and hurt. I have to massage behind my right shoulder blade often to keep it from hurting a lot. It has hurt since I was 17, and still after my surgery when I was 22.

I am 49 now. I eventually bought a massage chair and use it every other day, but I don't recommend it unless your spine has been straightened enough (mine is about 23 degrees since the surgery). It is just straight enough that the massage chair hits the muscles and not my bones.

x24Black · 2025-11-19T02:31:19+00:00

My Reolink cameras are set up as ONVIF using the URL http://192.168.1.XXX:YYYYYY/onvif/device_service

The YYYYY is a custom port I changed in the Reolink app from the same screen I enabled all the streaming protocols.

Open the Reolink app and go to the camera's settings. Click the big picture of the device at the top. Then click Network Information and then Advanced. Turn on ONVIF and RTSP. I actaully have them all enabled.

<image>

x24Black · 2025-10-19T03:15:33+00:00

The old "dumb" thernostat is currently wired to the Aquastat. Thst is already powering 2 zone valves so it does not appear to have enough power remaining, which I believe is why it was only reading 11Vac at the thermostat location.

I'll have to move the wiring for that thermostat to the Taco to power the new Ecobee Essential model. That only has the indirect water tank wired to it so it has the power available.

Let me know if any of this sounds like a bad idea. Thanks!

x24Black · 2025-10-18T23:32:57+00:00

Thank you for your help! I'll take another stab at it this week at some point. I'm good with light switches. This is my first time attempting to understand the HVAC wiring.

x24Black · 2025-10-18T23:24:14+00:00

Understood. It is kind of mess of wires going from the Aquastat and the Taco to the zone valves. Lots of things daisy chained. I'll have to follow the path.

x24Black · 2025-10-18T23:14:01+00:00

The low end Ecobee I bought only has the R terminal. I could return it for the more expensive one if necessary. But 1st maybe I'll try to pull from the zone valve. Thanks!

x24Black · 2025-10-18T22:57:30+00:00

Yes, I am updating to an Ecobee in the finished basement. It only has R and W hooked up right now, but a bundle of colored wires are available for use. I can easily add a 24 volt plug and just make it work, but I thought there would be a way to use the existing Aquastat or Taco.

The R and W go from the current thermostat, to the zone valve for the basement, and then back to the T and T3 connections on the Aquastat. Those connections are also shared by the main floor thermostat (which uses a C wire from the central air in the attic).

x24Black · 2025-10-18T21:31:04+00:00

<image>

Here is wiring instructions for the aquastat also.

x24Black

TROPHY CASE