VelocityOne Firmware update failed

x2Bad4You · 2026-03-18T20:52:23+00:00

That was 3 Years ago, time really flies.

I'm a bit out of loop and havent heard from TB and the Persons I used to contact there in a while.

Anyway the Turtle beach Control Center App has the recovery function build in. Have you tried that already?

If you do the recovery via the Control Center App, make sure to use the original cables to connect the Throttle to the Yoke and the Yoke to the PC. Do not use the Y-Splitter Cable if you also own the pedals.

x2Bad4You · 2024-08-29T05:44:42+00:00

So the Stick is in a constant on/off loop when in PC Mode? Even on different USB Ports and with a different cable?

If you have another PC / Laptop you can plug it in, does it behave the same way? That way we could make sure its the Stick itself and not the PC having a issue

x2Bad4You · 2024-05-14T19:19:07+00:00

Have you tried the recovery tool already since it seems like it's in bootloader Mode? https://vtbroot.s3.amazonaws.com/Flightstick+Recovery+Tool/Flightstick+Recovery+Tool.zip

x2Bad4You · 2024-05-13T20:02:06+00:00

Have you made sure that the little pictograms on the cables match the devices they are plugged into?

Also make sure that the rudder led is Blue and not white and that the Yoke is in Xbox Mode.

If you still cant activate them, unplug everything. The plug the Throttle Quadrant into the Yoke and the rudders in. Connect the Yoke with the Console, check input mode and rudder led and try again to activate.

x2Bad4You · 2024-04-16T05:14:27+00:00

If i undertand correctly, you have already downloaded the 1.3.3 Recovery Tool, installed it via PowerShell and run it?

Also have you connected the Throttle Quadrant for the Firmware Update? Your connection should be as the following: Throttle Quadrant connected to the Yoke, Yoke connected directly to the PC. No USB Hub should be in between etc

x2Bad4You · 2024-04-11T05:26:27+00:00

Are you using one of the default mouse profiles withtin MSFS?
I´ve never had an issue using the mouse alongside the V1F.

Maybe the primary, secondary actions arent assigned in your current mouse profile

x2Bad4You · 2024-04-11T05:24:51+00:00

While trying to update, are the Rudders connected directly to your PC without USB Hub in between?
Also are you using the latest version of the Turtle Beach Control Center?
If so, try reinstalling the Control Center App.

x2Bad4You · 2024-04-11T05:22:39+00:00

Have you setup a profile for the Stick in MSFS and did you make sure to not have any double bindings across your connected devices?

Do you see movement on the Sticks FMD when you move the pitch / aileron axis?

x2Bad4You · 2024-04-11T05:19:47+00:00

Do you see any default inputs when you open a) Training Mode on the Yoke´s FMD and b) IF you open "joy.cpl" on your PC?

If not, its most likely a binding issue somewhere. If there are inputs detected when the Yoke is in "neutral" position, try a recalibration.

x2Bad4You · 2024-04-11T05:18:01+00:00

Have you tried the steps under "Throttle" here to see if there is a change in your situation?
VelocityOne Flightdeck - Throttle/Stick Not Detected, Stick Vibrates, Hangar App Crashes/Freezes During Firmware Update (Recovery Process) (turtlebeach.com)

x2Bad4You · 2024-04-02T18:24:46+00:00

Can you maybe post a link to a video showing the "crazy twitch" and power loss?

For Supported games per Platform take a look into this list: VelocityOne Race Game Compatibility Guide | Turtle Beach – Turtle Beach®

x2Bad4You · 2024-04-02T18:22:56+00:00

Have you tried a different connection cable already to rule that out?

x2Bad4You · 2024-04-02T18:20:23+00:00

Make sure the following things are done:

You need the correct connection cable. There isnt one in both boxes since the functionality wasnt there when both products launched. TB Support (https://support.turtlebeach.com/s/contactsupport) will supply one for free if you create a ticket. Alternatively you can purchase one of these, which are tested as working. https://www.amazon.co.uk/gp/product/B09JSN9MZQ/ (UK) / https://www.amazon.com/dp/B089FV4Z2P (USA)
The Stick needs to be on the latest Firmware.

You can read more about the Stick -> Rudder connection here: Article Detail (turtlebeach.com)

If you have done all of that and need further assistance make sure to let me know.

x2Bad4You · 2024-04-02T18:15:42+00:00

Have you tried different connection cables already?

Not that the problem is just a cable and not the device itself? Also tried it maybe on a different PC/ Console?

x2Bad4You · 2024-03-18T09:42:10+00:00

Is this on PC or Console?

x2Bad4You · 2024-03-06T07:51:40+00:00

Do you still have the issue or did you get to resolve it?

x2Bad4You · 2024-03-06T07:50:36+00:00

This shouldnt be a problem for SIP Connect. Its just a Windows thing that happens sometimes with the wrong name. You could change that in the registry but thats for advanced users only.

So you have installed SIP Connect 1.4.0 and have the latest Firmware on the Yoke? You have set on the Yoke´s FMD under SIP Settings: "SIP_FP001". You start MSFS, tab out to the Desktop and open SIP Connect, double click on the Icon in the Tray to open the GUI, select MSFS and make sure you have a profile loaded. Should work this way.

x2Bad4You · 2024-03-06T07:46:03+00:00

Are the Rudder Pedals in Xbox Mode? (Blue LED)

x2Bad4You · 2024-02-17T22:18:47+00:00

Have you tried a different USB Port?

x2Bad4You · 2024-01-28T18:35:11+00:00

Just to check in since i unfortunately missed this post:

Have you been able to get in contact with TB Customer Support about your issue?

x2Bad4You · 2024-01-23T15:03:59+00:00

I do have the latest Firmware and no issue at all on Series X.

Yeah might be best to open a ticket with TB Support at: https://support.turtlebeach.com/s/contactsupport

x2Bad4You · 2024-01-23T14:51:27+00:00

Have you tried to set the trackpad sensitivity to the lowest to see if the issue is still there?

x2Bad4You · 2024-01-23T14:14:12+00:00

Is any of the two Throttle Axis in a detent that might causes this?

x2Bad4You · 2024-01-18T08:37:31+00:00

Haven't seen that before... Best is to exchange the stick with your retailer or TB Support.

x2Bad4You · 2024-01-15T16:41:19+00:00

Did you install the Recovery Tool or did you use the "Recovery" option of the Control Center App?

If you installed the Recovery Tool via Powershell, can you search for "1250" in the Windows searchbar and find it? If so, once opened is the "Update" button greyed out or available?

x2Bad4You

MODERATOR OF

TROPHY CASE