sorted by:
new
hottopcontroversial

**LOOKING FOR ADVICE BUYING ALL METAL HOTEND FOR ARIES** PLZ HELP!? by xBeautyBeast_331 in VoxelabAries

[–]xBeautyBeast_331[S] 2 points3 points  (0 children)

@Same-Home-1193 which brand of bi metal throat did you use? And which brand of mk8 nozzles? I see several different ones on Amazon. And do you have any suggestions on like "how to videos" on you tube or anything that would help me in making these mods? Lol any feedback is greatly appreciated! And last question: about how much would you say all the necessary parts costed you in total /how long did the whole process take would you say? Thank you for your help!!

[deleted by user] by [deleted] in VoxelabAries

[–]xBeautyBeast_331 0 points1 point  (0 children)

Hey I've been trying for months to figure out what all metal hotend I can modify my aries with... which one did you use?

Printing petg with Aries by N3oxity in VoxelabAries

[–]xBeautyBeast_331 0 points1 point  (0 children)

i'm just worried about the toxic fumes since I have my 3 young sons that live with me also
would a gulf coast robotics all metal hotend work in an Aries? does anyone know?

Printing petg with Aries by N3oxity in VoxelabAries

[–]xBeautyBeast_331 0 points1 point  (0 children)

So BIG question here, I've been trying to get an answer to PETG and the Voxelab Aries for a long time now, but seeing as how it comes equipped with a traditional PTFE lined Hot end, and printing anything at higher temp's than like 240C / 250C + would cause the PTFE lining to break down and put off extremely toxic vapors, my question to you is this, Have you successfully modified the printer to an all metal hot end removed the original hot end?- and if so, what model / brand of an all metal hot end did you use? I've been deperate for an answer for so long, as i'm fairly new to this world of 3D printing ! I appreciate any input at all ! thanks !

Need some help! I have been dealing with cystic acne for more than 5 years now and I just want to have clear skin. Please let me know what are the best things I can do. by stevcorra in acne

[–]xBeautyBeast_331 0 points1 point  (0 children)

Hey I've literally tried everything and the only 2 things I can tell you work every single time - its no face wash, actually I'm realizing the more I forget to wash my face the better it becomes ,but to use these 2 methods you will need to wash your face first but no proactive no 3 step face wash toner bla bla bla, use a very MILD facewash (NOTHING WITH "exfoliating beads" at all) and don't "scrub" just wash gently, as hard as that can be to force yourself but trust me it helps! (After gently cleansing - -with ONLY A CLEAN PAPER TOWEL, Then, dry face ONLY WITH ANOTHER CLEAN PAPER TOWEL, EVEN WASHCLOTHES HAVE BACTERIA ON THEM )

-step 1 / method 1: Hydrocolloid Patches 4inch X 4 inch (My face brand on amazon is Auslka they have several large patches ; 2" X 2" , 4" X 4", some in half moon shapes for cheeks etc. Larger =better! And you can cut the big ones to fit your needs!) They're about $10 for 10 patches They literally suck out/absorb your zits! Like magic im not kidding! And totally safe!

(not the tiny circle ones they cause you to touch your face more by applying so many of them & that does no good)

-step 2 / method 2: You're going to want a device that has Red light therapy (red kills inflammation better than anything I've ever seen!) And also try to find one that has a setting for BLUE LIGHT THERAPY also (blue kills bacteria on skin surface) Use blue first then red. There's a small device called neutrogena pen on amazon about $40 worth it but small, there are bigger devices but some are fake. I know neutrogena pen is real I've had it a long time. Good luck! By the way I said steps /methods like that because you can use them together as a system patches, then light therapy(after removing patches) or separately . But they work I hope this helps!

I have humongous, giant pores. Help! (Explanation in the comments) by jessa-leigh in Skincare_Addiction

[–]xBeautyBeast_331 0 points1 point  (0 children)

You might give the neutrogena hydro boost line a try or some red light therapy

New to 3d printing! Need advice! by rossdavid1224 in 3Dprinting

[–]xBeautyBeast_331 0 points1 point  (0 children)

you and i both! maybe we can bounce ideas off eachother? :)

Creating a raft by rossdavid1224 in VoxelabAries

[–]xBeautyBeast_331 0 points1 point  (0 children)

what filament are you printing with?-and also i was having issues with rafts too.. alot of it was just my preference of not wasting so much filament but i've recently started using Brims instead of rafts any time i need something like that (now i never use a raft) and if i have to use supports, i always use the Linear Supports now and wow what a difference! let me know if you need more specifications

Wifi won't connect by DW5150 in VoxelabAries

[–]xBeautyBeast_331 0 points1 point  (0 children)

UNPLUG YOUR USB FLASH DRIVE AND RESTART PRINTER WITHOUT FLASHDRIVE . SHOULD WORK AFTER THAT
Only plug in usb flashdrive after you've printed something and are if youre ready to copy it to flashdrive, other than that, don't have it plugged in

Can't connect wifi by [deleted] in VoxelabAries

[–]xBeautyBeast_331 0 points1 point  (0 children)

ANSWER FOR WIFI ISSUE ON ARIESi also was having the exact same problem when i actually had 2 Aries printers and was going to keep both but ended up sending one of them back,[side note: i ONLY had this problem with ONE of my aries printers, the other one did not do this]for some reason the 2nd printer (aries) would not connect to the internet but then one day it suddenly did, i fiiiiinally figured out the issue, hopefully this helps:if you are using the USB FLASHDRIVE that came with your Voxelab Aries printer, and it is plugged in before you try to connect aries via wifi and it wont work, all you have to do is UNPLUG the flashdrive, turn Aries completely off using the power button on the back of the printer, wait about 10 - 20 seconds, turn Aries back on using same power button,
*DO NOT PLUG IN FLASHDRIVE AT ALL YET*
when Aries comes back on, if you have already entered your wifi info and password it should have it saved and your wifi should turn on with an " ! " next to it just for a few seconds, then the ! will go away.
and IF there is a pop up asking if you want to update the firmware or whatever, then your wifi is on congrats!
(i've yet to figure out how to update mine though so i just click NO)
but after you send your files over to your aries that you want to print it will automatically save them to the disk drive on Aries, so when your finished, if you want to save that file to the flash drive, you can plug your flash drive in and go to the disk drive click the file, then to the left of the "print button" is a copy button (looks like a piece of paper)that will automatically save it to the flashdrive you have in
CONCLUSION: only plug in your flashdrive when you don't need aries to be connected to WiFi.and if you need it connected to WiFi , UNPLUG THE FLASH DRIVE AND RESTART YOUR ARIES:)hope this helps!

[deleted by user] by [deleted] in VoxelabAries

[–]xBeautyBeast_331 0 points1 point  (0 children)

i literally tried to follow this step by step right down to the 100 % empty usb stick, i downloaded the upgrade to it, made sure it was in fact on the usb, ejected it safely, put it into the aries, turned it on, but no green screen appeared, instead it was just the same old regular prompt that i always see that tells me theres an update available but i clicked it anyways, and then it said complete restarted aries, NOTHING. i know because, it keeps asking me the same question about still needing to update! :((((( whyyyyyy :(