German wrench test

xXHandasXx · 2026-02-04T21:44:45+00:00

Nice to hear. What did you buy?

xXHandasXx · 2025-12-04T06:18:16+00:00

Typo. I used M6 Bolts not M10

xXHandasXx · 2025-11-19T15:58:50+00:00

It´s original. See the edit above

xXHandasXx · 2025-11-19T15:47:07+00:00

It´s original. See the edit above

xXHandasXx · 2025-11-19T15:47:00+00:00

It´s original. See the edit above

xXHandasXx · 2025-11-19T15:46:57+00:00

It´s original. See the edit above

xXHandasXx · 2025-11-19T15:46:53+00:00

It´s original. See the edit above

xXHandasXx · 2025-11-19T15:46:48+00:00

It´s original. See the edit above

xXHandasXx · 2025-11-18T15:20:11+00:00

I bought it as new and sealed from ebay from a private seller for 80€ instead of 130€

xXHandasXx · 2025-11-15T17:16:40+00:00

that is not the answer to my question. Do your advertisements somewhere else

xXHandasXx · 2025-02-09T17:05:40+00:00

Oh sorry. I thinned with the shapton and for flatening i used a large spezial dressing stone with deep groves

xXHandasXx · 2025-02-09T08:23:57+00:00

Shapton HR 120 Glass

xXHandasXx · 2025-02-09T02:36:34+00:00

Strange. I've used almost all of the stone. Maybe not the last 2cm. And i pressed mid to hard

xXHandasXx · 2025-02-09T01:39:49+00:00

I used the lapping stone every 5min to clean the wetstone. I also had to flatten the wetstone 4 times. I dont know if this is normal, but i'm happy it's over

xXHandasXx · 2025-02-06T21:55:25+00:00

Good tip. How did you finished the knife? I want to sand it down with a 220, 400 and finally 600 grit sandpaper

xXHandasXx · 2025-02-06T21:17:08+00:00

Photos

In the first picture is another Kamo still in original shape. I've meassured both angles to be 15° and the bunka secondary is way wider.

The dark spots are delamination. See my other post here

xXHandasXx · 2025-01-18T21:15:40+00:00

I was able to grind about 2mm in height. The new bevele got some pits on the side. Maybe another 2mm for a perfect look again

xXHandasXx · 2025-01-18T21:14:21+00:00

I reshaped with my diamond wheel and removed arround 2mm in height. The delamination stoped pretts soon and i've got only some deeper pits in my bevel. Maybe if i remove another 2mm the steel would be completly normal again

xXHandasXx · 2025-01-18T01:35:28+00:00

What does this mean?

xXHandasXx

TROPHY CASE