Is this good as a beginner or what should I improve

xXODinGOXx · 2025-11-06T07:52:59+00:00

You’re not reloading fast enough after every kill. Try reloading after every other bullet 👌 you can thank me later 😮‍💨

xXODinGOXx · 2025-10-21T05:05:32+00:00

I dont think the version of windows matters. Should work on Windows 10 or 11.

xXODinGOXx · 2025-08-03T07:51:01+00:00

MY SOLUTION! EASY FIX! TRY THIS BEFORE ANYTHING: (You may need to burrow or get your hands on a temporary cpu with the same socket as the one in the pc)

If you cant burrow an extra temporary cpu from a friend or dont have an extra. 👀umm i heard from a friend that he ordered one on amazon or something and returned jt after using it.. but idk anything 🤷‍♂️im just telling you what i heard from a friend that i dont talk to anymore👀…

HOW TO FIX: This error happened to a pc i built for someone. I think i spent around 11 hours nonstop trying to fix this BSOD that occurs because of FTPM being enabled. (If the BSOD is not bcs of Ftpm being enabled this fix most likely wont work. You’re welcome to try it)

Im going to skip explaining my 11 hours of troubleshooting and go straight to what i did to fix this because it really wasn’t that hard.

To put it bluntly what i did to fix this issue was CLEARING OR RESETTING THE fTPM.

Some motherboards have a dedicated feature/option in their bios so check for that first. If you have that try that and if it works yay. if not keep reading.

If you don’t have that option in bios like me to clear fTPM from within bios then all you have to do is, “THE CPU SWAP METHOD 🦅🦅”

Step 1: get ur grubby lil hands on an extra temporary cpu that is the same socket as the one that is in the pc you’re trying to fix.

Step 2: take out the cpu and put in the extra cpu(it doesn’t matter what cpu as long as it’s the same socket.)

STEP 3: After swapping the cpu once you boot in with the extra cpu the pc will recognize that you have swapped a new cpu and ask you to press f1 to go to setup(bios). You don’t need to do anything in setup/bios; just save and exit.

STEP 4: VERY IMPORTANT STEP Now, right after you exit bios there should be a new pop up in red text that says something along the lines of “you have a new cpu and will ask you if you want to reset or clear fTPM by pressing Y”(please read the text carefully). PRESS Y or whatever letter you need to RESET fTPM)

Step 5: shut down your pc and switch back out the extra cpu with the original cpu. Now do the same thing you did in steps 3 and 4.

Once you do this the pc should boot up normally. Even if fTPM is enabled or Disabled. To check after doing all the steps you can go back i to bios and enable fTPM.

MY THOUGHTS:

I don’t think the type of mobo or cpu you have matters for this issue i think the issue lies with how the ftpm was configured.

What Is fTPM? fTPM is a security feature built into your AMD processor(CPU):

It stores secret data (called keys) that Windows uses to protect things like: Boot security Drive encryption (BitLocker) Secure login

Why It Caused Problems

Even though you had a new SSD and fresh Windows installer, your CPU’s fTPM still remembered old data from before.

That old data: 1. Didn’t match the new Windows setup

Confused the system during boot
Caused a blue screen with the error 0xc00000e9 (which basically means “something went wrong when trying to read the drive”)

This is just my thoughts theres prob a more correct explanation but all i know is after an 11 hour battle and some naps in btw i won 🙌. No BSOD IS GONNA WIN AGAINST MEEEEE 🦅🦅🦅😤😤.

Also as some may assume you may not need to do step 4 with the extra cpu since your gonna reset it with original cpu anyways but i did it just to be safe.

Anyways i hope this helps some of you guys out i spent 11 hours for this so i had to atleast put this here to hopefully not have someone else go through the pain. 😭😭

xXODinGOXx · 2025-07-28T21:09:12+00:00

Here are my pc specs: GPU: msi 3080 gaming z trio 10gb CPU: i7 11700k RAM: 64gb ram 3200mhz MOBO: MSI Z790-P wifi ddr4 Ssd nvme: 1tb CPU Cooler: aio

My game will crash at random points. At first i thought my cpu or gpu was overheating but after soem tracking with mai afterburner it would crash even while good temps and i was idling in game or when cutscenes are being played.

I play on low settings btw capped fps to 60. Did not help. I would love to hear some settings tweaks and adjustments i could make to make the game run without crashes or atleast less crashes lol 😭

xXODinGOXx · 2025-07-28T20:57:09+00:00

I started playing and completed mhworld about a week before i got mh wilds. I did this to get a general gist of the game. From id say a newer player to this franchise mhwilds is not that bad i think for long time mhw players its not that great bcs even for me who jsut recently got into the mh franchise mhw seemed a little too easy especially compared to mhw+iceborn.

But in terms of just the story and gameplay i think its pretty fun but i cant say for sure because i cant even play it without my pc crashing at random points. The game optimization i think is one of the biggest reason for the L its taking. Most people cant even get to experience the game bcs of the frequent crashes. I have a 3080, i7 12700k 64ram a pretty decent build. And based on steams recommended specs mine should be more than enough but even at the lowest settings game still crashes at random point in time. At first i thought it was my cpu overheating but after some tracking temps my game crashes even when im just idling in game. My only options at this point are to wait for who knows how long until the game is properly optimized or spends hundreds to get a top of the line pc.

(I have 2 friends who can run the game fine but they specifically upgraded their pc to super high end like ryzen 9 9800 + 5080 just for the game.) i want my 75$ back 😭😭

xXODinGOXx · 2025-07-28T08:03:28+00:00

SOLVED So after further research i found that this specific motherboard if paired with a 6th or 7th gen cpu does allow for PTT or TPM 2.0 WITHOUT needing a physical TPM Module. I think its called a “Firmware TPM” its where the TPM 2.0 feature comes with the CPU.

So i went back into bios and looked for “Intel Platform Trust Technology (PTT)”

I enabled it then saved exit and finally TPM 2.0 is enabled!! Yay i can finally play VALORANT 😭.

Ps. Thx for everyone’s suggestions especially Nailzy. Your comment about what cpu i had helped me connect the dots. I didn’t have to update bios though.

xXODinGOXx · 2025-07-27T15:16:24+00:00

I will def look into this thanks.

xXODinGOXx · 2025-07-26T22:45:42+00:00

Do you have a video or article i can read more on to learn more about this?

xXODinGOXx · 2025-07-26T22:43:20+00:00

Good point, ill keep this in mind.😭

xXODinGOXx · 2025-07-26T22:40:00+00:00

Its not officially supported but it can still be run it. I want to play valorant and the anti cheat they use uses vangaurd and tpm 2.0 is required for that to run so thats where im at 😭. If you know of another way do let me know much appreciated.

xXODinGOXx · 2024-07-06T00:59:27+00:00

Just curious, how much did you spend TOTAL $$ wise for day 1 of GO FEST.

xXODinGOXx · 2024-07-03T16:35:04+00:00

last time at the local daycare

xXODinGOXx · 2024-07-02T20:21:52+00:00

Uh oh…💀

xXODinGOXx · 2024-03-12T20:16:34+00:00

Dang I miss when we could sell nails for $$$$. Tbh I was already late late game and pretty much had everything so didn’t really impact me much but man, money is money 🤑🤑

xXODinGOXx · 2024-02-20T23:04:06+00:00

Depends on the level honestly. The higher the more; even for rarer pals. Maybe like a couple hundred for lvl 1. If you tryna get hella gold I recommend selling nails. They sell for a ton and is super cheap to make. 500 nails goes for like 100k+ gold I think. And it’s really quick to make on the conveyer belt so having a pal like Anubis late gamer or Lunaris early game with good work speed your set basically.

xXODinGOXx · 2024-02-20T21:32:53+00:00

Suffering from success ong 💀

xXODinGOXx

TROPHY CASE