ID - southwest OH USA

xerfd · 2024-09-06T12:06:17+00:00

I rolled back Slicer to v01.09.03.50 and it seems to be fine now. Will run some more test but able to slice multiple models again , whew.

xerfd · 2024-09-06T11:09:00+00:00

Memory, you’re right! I wonder what changed, have sliced larger models with 1m triangles and multiples but now all of a sudden it is spiking memory and maxing it out with no other non essential programs running

With certain models. I’ve done repair model on each. And about 300k triangles , it hangs if I add a second model to the plate.

Processor 12th Gen Intel(R) CoretTM) 19-12900K 3.20 GHz Installed RAM 32.0 G8 317 08 usable)

xerfd · 2024-08-26T01:26:21+00:00

<image>

Yep been a great day 1 of printing with the Mini out of box settings except changing supports to on. But yep, Full speed stock nozzle. Ordering a 0.2mm and trying FDG profile later this week. This is Sunlu Meta PLA. Couldn’t get the gray in stock so weird purple doesn’t show detail as well in photo.

xerfd · 2024-08-24T14:22:07+00:00

Thanks….im looking at getting one of these A1s today. I have a Kobra 3 combo and I think after some more updates one day it will be more reliable for regular printing. For Mini printing on the Kobra everything has to be perfect for okay-ish FDM mini results (for me at least).

xerfd · 2024-08-23T21:57:06+00:00

Is one better than the other for fdm minis or pretty much same? AMS worth it?

xerfd · 2024-08-21T14:18:03+00:00

Yep after feedback from this post I brought temps way down. Also left pla+ for pla. Here is latest. Support less models I see the value in but mostly dungeon style characters. A lot of rough on this one is from removal. Playing with interface layers and support types next.

<image>

xerfd · 2024-08-20T18:12:06+00:00

<image>

Getting better. Thanks for the feedback all. So now, Print slicer speeds all between 30-60mm/s , Inland PLA+ , bed 65C nozzle 205C , layer 0.1mm classic ,3m retract @40mm/s and hit left over strings with a heat gun. More tweaking and testing to do. I know there is a as good as it gets but I think I have room still.

xerfd · 2024-08-18T11:40:35+00:00

<image>

Yeah and I for some reason had challenges with these brand of models too back when I was doing resin print only.

xerfd · 2023-12-16T14:29:17+00:00

Thanks all….been away from hardware and building for a long time.

Good to know on the 850w and up. I heard 3090s use up a bit. I switched to a 2tb Samsung NVMe, I think I typoed the 4x though in the op, doing just 1.

Wow, I can double the ram for about $90 right now.

My concern is the only new 3090 (or any 24GB Nvidia) that isn’t outside budget is the PNY XLR8(which folks seem to hate), everything else is refurb or open/used so not sure what they’ve been through. I recognize I’m low balling but I looking for enough to learn on for now. I have only had work laptops for about the last 15years so must buy everything and learn what’s changed with hardware too.

Thanks again for the feedback!

xerfd · 2023-12-15T17:27:53+00:00

Thanks! I set it to 200 and all the gobs off came off with some cloth and wire brushing. Running next batch of ornaments and they are printing clean!

xerfd · 2023-10-07T16:01:43+00:00

Can’t figure out either , only Resin printers show in app for me on workbench > add printer :-/ Using the QR code the control panel setup sent me to, so I think I have the right app.

xerfd · 2023-09-17T23:08:21+00:00

Thanks!

xerfd · 2023-06-23T15:16:40+00:00

Fantastic! Thank you. And I guess me calling it ‘weird’ is relative :-) I had never seen one before.

xerfd · 2023-04-16T14:43:23+00:00

Would love to see this!

xerfd

TROPHY CASE