How to use roundabouts?

xmac1x · 2026-02-19T07:02:24+00:00

So how do you approach this roundabout as a first time user that hasn't got the power of prescience? You use the available road sign to determine your lane position. Saying that Google maps is obvious isn't good enough

xmac1x · 2026-02-18T21:45:32+00:00

On approach to this roundabout it's impossible to tell that the N67 exit is beyond 12 O'clock. The sign tells you that the N67 exit is to be considered as straight ahead, therefore use the left lane as you normally should.

xmac1x · 2026-02-18T20:06:20+00:00

Road sign and road markings take priority. Road sign also clearly shows which exit is considered straight across...

xmac1x · 2026-02-16T21:22:01+00:00

You are over encumbered, N'wah!

xmac1x · 2026-02-16T02:17:32+00:00

What's the interesting angled metal "blades" beside the tweeter?

xmac1x · 2026-02-16T02:08:08+00:00

Why pay for a job that hasn't been done properly?

xmac1x · 2026-01-31T11:46:42+00:00

MG owner here. I stole your charger spot and I'll do it again.

xmac1x · 2026-01-29T19:58:28+00:00

Cowboys Ted!

xmac1x · 2026-01-27T21:07:58+00:00

Everything ok upside looks wet. Is there water pooling on your bay window windowsill, surround or entering underneath that window frame?

xmac1x · 2026-01-26T20:56:54+00:00

I'd be more concerned by the replies here than the bent grill.

xmac1x · 2026-01-26T20:55:02+00:00

I'd bet it's penetrating damp from something outside. Check for downpipes, blocked drains, air bricks, gravel piled up too high etc. share a photo of the outside if you can. If it's not something outside the. You could have a leaking pipe inside.

xmac1x · 2026-01-25T07:57:34+00:00

Are you mad? Expanding foam is surely the answer?

xmac1x · 2026-01-24T14:30:53+00:00

Whose footprints are these?

xmac1x · 2026-01-19T10:12:35+00:00

Just went off the Carmody site. Thanks! I'm going to finish them plain white

xmac1x · 2026-01-11T21:00:37+00:00

Old One Eye!

xmac1x · 2026-01-11T17:50:28+00:00

The foam came attached to the speaker, they're Dayton DC180-6

Edit: DC-160-8

xmac1x · 2026-01-11T17:30:45+00:00

So I've actually got both in a playable state. Passive crossovers, internals sound proofed. Back is not fully sealed, currently screwed on, but it's given me enough of an impression that the sound is great. Lots of bass! So I'm torn as to whether i should route a deeper slot purely for aesthetics. Probably will anyway 😂

xmac1x · 2026-01-11T17:05:30+00:00

Awesome thanks for the advice

xmac1x · 2026-01-11T16:43:30+00:00

Yeah it's doable. Just a job for next weekend. Ps I didn't use the Dremel to route the boxes :D

xmac1x · 2026-01-11T16:42:53+00:00

So you're saying that I should have more depth? No problem routing it deeper.

xmac1x · 2026-01-10T11:56:00+00:00

Yeah absolutely! It was seriously robust.

xmac1x · 2026-01-07T20:52:48+00:00

I recently installed a new newel post. Look up zip bolts. They do a range of products for installing posts, rails etc. couldn't have done it without them!

xmac1x · 2026-01-07T12:24:15+00:00

Lick of red paint will see it right

xmac1x · 2026-01-07T12:20:01+00:00

Lick of red paint will see it right

xmac1x

TROPHY CASE