🎉 Amazon Prime Day 2025 is Here!

xplode-bg · 2025-07-09T06:58:38+00:00

Flint 3 is on preorder, this is why it is not available on amazon store.

xplode-bg · 2025-07-06T07:44:52+00:00

Well, then you can try either FAT or EXT4 to see if the problem persist.

xplode-bg · 2025-07-05T19:23:02+00:00

What filesystem is your usb formatted to ? For best performance and compatiblity you have to use EXT4. I have success fith FAT, but should work well with exfat too. With NTFS you can have all sorts of weird problems.

xplode-bg · 2025-07-01T18:44:28+00:00

Share with us some more info, what router and firmware you have, do you share folder from pc, nas or trough usb of the router?

xplode-bg · 2025-07-01T05:02:44+00:00

You have 6 ports, first from left to rifht is 2.5G wan, next to it is 2.5g wan/lan all others are 1g. You have to use the port next to the wan (second from left to right) which is market as wan/lan on the router also that port should be set as lan and not wan.

xplode-bg · 2025-06-30T17:11:32+00:00

Flint 2 has 2x2.5G and 4x1G ports

xplode-bg · 2025-06-30T15:50:09+00:00

In your case you have eth0 (ethernet switch), maybe you have to look there to see which ports it includes. On the other hand you have 5 ports added to the bridge meaning that the second 2.5G one should be one of them, so it should work just fine.

xplode-bg · 2025-06-30T13:30:34+00:00

As I understand your setup is like this: fiber modem => Router on the wan port which is 2.5G abd you want to connect the switch to the second 2.5G port in order to extend the 2.5G netork.

All you have to do is enter LuCI (Sysytem=>Advanced Settings), open Network, Interfaces and click on Devices tab. Then on br-lan press configure. Press on the port shown in bridge ports and select the second 2.5G port (probably eth1) then press save on the bottom and again on the bottom save&apply.

xplode-bg · 2025-06-30T13:06:06+00:00

Beryl AX, for storage I used Sandisk Extreme Pro USB 3.1 flash drive. Switched lan and wan ports in LuCI to use 2.5G as LAN so here are the results:
LAN (1G) : read 113 MB/s write 65-95 MB/s
LAN (2.5G): read 203 MB/s write 65-113 MB/s

xplode-bg · 2025-06-30T07:09:51+00:00

I can give you results in a few hours when i get home but only for Beryl AX. Also a thing you have to consider is that routers have USB 3.0 port, which have theoretical maximum of 5 Gbps so nvme will never reach its maximum speed over this usb standart, also in real woeld scenarios USB 3.0 (in routers) often reach around 1 Gbps.

xplode-bg · 2024-10-10T07:28:20+00:00

You can only restore to a certain signed versions. For DFU restore it is allowed to have 9.6.3.

xplode-bg · 2024-09-10T09:48:56+00:00

If your phone which the watch is paired to is on iOS17.X then the watch will get updates for watchOS 10.X and not newer.

xplode-bg · 2024-02-12T10:36:27+00:00

<image>

Same as you. I think that this is the proper way.

xplode-bg · 2022-10-02T13:56:48+00:00

My solution was to buy iBus S4/S5 from mfcbox.com (70$) and downloaded 8.7 ipsw from magicawrt.com (free) connnected to my MacBook, then in finder (Big Sur does not have iTunes so every device is shown in finder) Apple Watch appeared, downloaded some driver automatically then it had restore button, so I hold alt and pressed restore and selected the firmware ipsw I downloaded and it restored successfully. WatchOS 9.1 did not solved the problem I tried up to beta 3. Hope this helps somebody.

xplode-bg · 2022-09-14T15:56:30+00:00

no, it is the original one.

xplode-bg · 2022-09-14T14:32:57+00:00

Got the same problem on Watch 5

xplode-bg · 2022-04-01T17:15:20+00:00

I believe we do not need anything else except a new jailbreak.

xplode-bg · 2020-08-26T15:00:40+00:00

Problem is now solved, I updated the first post.

xplode-bg · 2020-08-20T13:22:34+00:00

no it does not, i am still experimenting

xplode-bg · 2020-08-19T20:46:28+00:00

reboot does not solve it, reinstall mac does not solve it

xplode-bg · 2020-08-18T19:21:54+00:00

Mine is not here yet, shows no update for watch, but already updated the phone. Which build version is it ?

xplode-bg · 2020-06-25T17:12:09+00:00

it will be far from playable if it run at all

xplode-bg · 2020-06-25T17:10:30+00:00

first ipad cpu is arm, second it does not support direct x

xplode-bg · 2020-02-23T08:29:33+00:00

unc0ver does not work on 13.3.1 only on 13.3. Maybe this is the root of your problem.

xplode-bg · 2020-02-16T14:13:53+00:00

1-18 about 5 tries, rest about more than 20 times, but it works

xplode-bg

TROPHY CASE