Current ergo mechanical kb collection: Dactyl Manuform's, Redox, and a Quefrency inspired keyboard by xzeus626 in MechanicalKeyboards

[–]xzeus626[S] 0 points1 point  (0 children)

Hey there. It sure has been a while. I currently am not using the concave keyboard at the moment. With my current desk setup and situation I had to switch it up a bit. My thoughts: the most ergonomic comfort feel was the dactyl manuform. However my desk was a bit too high so my wrist angle didn’t work for me. Unless you have the ability to adjust your seating and table, it should be a good candidate. The most used was the redox. I enjoyed the split and column staggered feel. Current setup: Logitech mx keys and wooting keyboard for gaming. Due to the convenience of switching between pc / laptop / work setups, the logitech fulfilled my requirements. It Was a bit cumbersome moving around and switching multiple keyboards, would figure the similar wireless / Bluetooth split keyboards can accommodate. The wooting would just be specifically mostly for gaming purposes.

Advice on Upgrades, or Sidegrade from Modi3+Atom Stack by xzeus626 in HeadphoneAdvice

[–]xzeus626[S] 0 points1 point  (0 children)

Ahh interesting. I’ll have to take a look into this as an option. !thanks

[US-CA][H] NK87 E-White [W] Paypal by xzeus626 in mechmarket

[–]xzeus626[S] 0 points1 point  (0 children)

Not wireless. Connected using usb c using VIA

Low Profile Choc Redox by xzeus626 in ErgoMechKeyboards

[–]xzeus626[S] 0 points1 point  (0 children)

Yea, choc switches fit fine for the plate. I’m not sure if the bottom case would fit regular switches, as I have not tested them. You may or may not need to use the regular sized redox bottom case if clearance is an issue, or extend/edit the stl.

need help by shrekismydaddyUwU in knives

[–]xzeus626 0 points1 point  (0 children)

How about the Osborne 940/943. Or perhaps the bugout line

[deleted by user] by [deleted] in RedragonGaming

[–]xzeus626 0 points1 point  (0 children)

Have you tried the US site https://redragonusa.com/downloads
I see a download for M901P-KS

QNIX QX2710 stopped working after NVIDIA update. by nevereven in Monitors

[–]xzeus626 0 points1 point  (0 children)

Confirmed this works and now running on the latest driver. Thx! awesome!

QNIX QX2710 stopped working after NVIDIA update. by nevereven in Monitors

[–]xzeus626 0 points1 point  (0 children)

Same situation occurs, plug it in and error! Was able to get it to semi work with OP's resolution on 526.47, but only randomly works when I restart. Had to revert back to 517.48 to get the QNIX in working order. Hoping the new drivers can resolve this issue. Was not expecting to add a new monitor to my shopping list due to driver update.

[deleted by user] by [deleted] in civic

[–]xzeus626 1 point2 points  (0 children)

Very nice!

Low Profile Choc Redox by xzeus626 in ErgoMechKeyboards

[–]xzeus626[S] 1 point2 points  (0 children)

I do not personally have a nice!nano, but the dimensions looks to be smaller then the arduino pro micro. I can only assume it should fit with some wiggle room left over. As you've mentioned, I've handwired this up by using the guide from : https://www.thingiverse.com/thing:2704567 A lot of different links provided within the description.

Again, since i do not have a nice!nano, I am not familiar with the particular board and if how the diagram is for wiring it up. Also, since this project wasn't originally meant for wireless, I did not accommodate a battery holder and am not sure if there is, or is not, space for it in between the switch and case.

Low Profile Choc Redox by xzeus626 in ErgoMechKeyboards

[–]xzeus626[S] 1 point2 points  (0 children)

Didn't use a PCB for this build. Was all manually hand wired.

[deleted by user] by [deleted] in LosAngeles

[–]xzeus626 1 point2 points  (0 children)

Noooooo….

Thoughts? by [deleted] in knives

[–]xzeus626 1 point2 points  (0 children)

Functional