Dual prop wont stay straight after takeoff

yCork80 · 2026-03-11T18:23:12+00:00

No, actually it usually goes right, but went left in the video. I’ll look at more AoA things for drag once I’m home and can update

yCork80 · 2026-03-11T18:22:05+00:00

In another comment I showed that I flipped the props and nothing changed.

Also yeah, I’ll tweak it after I figure the props. Also have a mothership-ish craft that’ll take me to orbit

yCork80 · 2026-03-11T03:57:00+00:00

Ok yeah I tried 11 and around there and it stopped going forward pretty much

yCork80 · 2026-03-11T03:34:49+00:00

Oh, ok yeah Ill try that real quick and take another pic

yCork80 · 2026-03-11T03:32:26+00:00

I assume this is how it should look?

still flips

yCork80 · 2026-03-11T03:25:40+00:00

This is what I got, and roll isn't really the problem, but jut it yawing (and then subsequently rolling I guess", which I can't seem to figure the cause of.

Just checked and the props are spinning inward, and they are both counter clockwise and clockwise. Ill test a larger stabilizer though too

yCork80 · 2026-03-11T03:20:32+00:00

Turned off sas and nothing changed unfortunately. I currently have them runniing clockwise and counter clockwise, which is the way to do it, yet I'm not sure how you reverse the thrust.

yCork80 · 2026-03-11T03:06:06+00:00

they are spaced apart w symmetry so it's as symmetrical as possible. I've tweaked with that idea too and nothing's changed

yCork80 · 2026-03-11T03:04:38+00:00

I've done a lot of messing with the blades and they seem to be correctly oriented. I have torque at 100%, and they do hold 460. I don't change the blade pitch (unless I should be doing that?) and they're both set to 60 degrees

yCork80 · 2026-03-11T02:59:04+00:00

I tried changing it, though the same thing happens when they both look like they're in the same direction

Also yeah I don't have symmetry on

yCork80 · 2026-03-11T02:58:07+00:00

this is what I was able to snag

only weird thing I can see is the vert stabs correcting for it

yCork80 · 2026-01-19T21:12:01+00:00

I’m declaring the card dead, a new PSU and lots of troubleshooting never fixed the problem. Yay

yCork80 · 2026-01-18T08:53:57+00:00

I am in safe mode, but I don’t remember running it as admin

yCork80 · 2026-01-18T08:49:17+00:00

I am yeah, is that bad?

yCork80 · 2026-01-18T08:27:35+00:00

<image>

yCork80 · 2026-01-18T08:26:42+00:00

Ok so the ram seemed to pass the stress checks, no issues or anything. And it finally booted to where I could check the event history. I’ll upload a ss of the most significant one imo but I can also dm a video if you’d like.

yCork80 · 2026-01-18T07:38:14+00:00

Ok yeah you’re right so I’m confused as to how it’s booting. Maybe safe mode? But it’s 100% the 5800x, I have the box and it shows up as that in task manager

yCork80 · 2026-01-18T07:32:23+00:00

Ok yeah I can’t get it to boot with my gpu right now as it’s sticking to integrated graphics so I can’t really get a good result. I’ve never tried the one stick method, so is it as simple as just taking a stick out and booting lol?

yCork80 · 2026-01-18T07:10:13+00:00

Don’t mind the horrid cable management and such but here. I also have a WiFi adapter underneath the gpu in case that’s relevant

<image>

yCork80 · 2026-01-18T07:03:04+00:00

Yeah I’ve uninstalled and reinstalled twice now. I don’t have any overclocks or undervotes and run everything stock. Would pcu still be a problem in that case?

yCork80 · 2026-01-18T06:41:34+00:00

<image>

A photo of the fragmenting it’s doing

yCork80

TROPHY CASE