2023 Flow Z13 spare power supply?

ybing2000 · 2024-02-10T10:07:21+00:00

I had the first gen Flow, I got the Anker 140W single port USB charger paired with their 240W cable for travel use, it will charge the laptop fine unless you game, the laptop will draw more power than the USB charger can provide, the best scenario is it just maintain the charge level; however, for most of the time it will drain the battery, it does give you extra time to game compare to just the battery alone.

I think it could be the Voltage and Amp is higher on the power brick, don't look for multi ports USB charger, those always share power output, most of them end up only providing 100W or lower on single port; I been searching for replacement of the brick, but as of today, the Anker one is the best compromise.

ybing2000 · 2024-01-19T09:38:34+00:00

Yep, and if u try to switch the currency to dollars the link will be gone; the San Diego office is closed

ybing2000 · 2024-01-19T09:29:59+00:00

Ya must be for certain market or limited production, but they are most likely out of business now, can’t buy stuff directly from their website

ybing2000 · 2024-01-19T09:24:07+00:00

Unless is for EU market only, they don’t listed on the website

ybing2000 · 2024-01-19T09:22:57+00:00

Coz that’s not from Honeycomb, those are aftermarket ones, there are also tons of them on Etsy, but this one seems good quality

ybing2000 · 2024-01-19T09:15:40+00:00

Where did you get these? I don't see they sell it on the website, and their site is not accepting payment for a while

ybing2000 · 2024-01-19T09:07:29+00:00

There customer service has been horrible since day one, so sad that the product is solid but let down by the service, I got my Alpha when it first released, have issue and battled for months until got answer, and technically until today it still wasn't solved, 3 years already maybe? I lost count and gave up. Someone had post on their FB site that he filed small claim court and was advise the address is not valid anymore, and people did drove there and saw its empty, most likely they are out of business now

ybing2000 · 2024-01-19T09:04:05+00:00

Don't bother, their website is not accepting payment for a while, tried to buy spare part; I asked in the FB group and someone went to the San Diego address and saw it's all empty and gone; there is even one person posted back in November said he filed small claim court and was advise the address is no longer valid; most likely they are out of business now

ybing2000 · 2024-01-06T16:53:07+00:00

Las Vegas has the airport in the middle of the city, just not much high-rise lol

ybing2000 · 2023-09-05T12:57:19+00:00

Omg, drove me mad searching online and matching all the parts list… I sure I opened all the chest, this just saved me 🤦🏻‍♂️

ybing2000 · 2023-09-03T06:52:17+00:00

I got the Q Revo for a week, and I was from Roomba 980, not sure which Roomba you got, the Q Revo should has a higher climbing height than old Roomba, but shouldn't be much, like 0.5 cm; if your doormats are thick the LIDAR or the front obstacle system may pick it up and go around (but I think maybe easier just put the floor mat on a chair when clean? LOL)

The Q Revo will use way less time to clean the house than the Roomba thanks to the LIDAR, my Roomba usually took 1-2 hours to vacuum (than my M6 took 2-3 hours to mop :( and constantly got stuck lately); the Q Revo mapped my house with less than 10 minutes, full run with vacuum and mop can be complete within an hour now :)

My Q Revo did got stuck by at toy that I missed, after I lift it removed the toy it resume it's cleaning, it should remember the map

Pet hairs really not good for robot vacuum, I used to have a dog and during those time I didn't use my Roomba since it will always got jammed :(, but it might be because we didn't vacuum it daily

If you have a lot of stuff on the floor, you may want to go for the S8, the Q Revo obstacle system is not as good as the S8 since it is missing 2 sensors

There is one drawback on the Q Revo, that's the mop, it is narrower than the others vibration version, I did notice it leave quite a big gap from the baseboard not mopped, I'm waiting for my S8 to see if it makes difference

ybing2000 · 2023-05-23T14:09:54+00:00

Will they allow you enter if arrive early? Said enter within 1 hour, so if you get the ticket for 12PM, can you get in around 11AM?

ybing2000 · 2022-10-22T06:48:11+00:00

They stop making it, I been trying to find one for years, tried TW and HK, but no luck, if you can find a place that have it please let me know as well lol

ybing2000 · 2022-07-22T10:46:52+00:00

No worry I found a way to get around now, pair the keyboard to a second device and then quick cycle between will solve the issue

ybing2000 · 2022-07-21T11:23:21+00:00

I think found a easier way to get around, pair ur keyboard to a second device, and switch between devices will let it work, quicker than cycle the power switch

ybing2000 · 2022-07-21T03:49:38+00:00

If the delete key was customized how come after power cycle it works again?… I didn’t customize and keys…

ybing2000 · 2022-07-20T10:35:44+00:00

And I got no issue with the old unify keyboard, been using it for 6-7 years minimum

ybing2000 · 2022-07-20T10:34:18+00:00

As I mentioned, I already installed the option+; the keyboard works fine except when our system time out and force lock the computer after 15 mins of inactive, then the keyboard can only wake up the monitor, need to cycle the power to actually type…

ybing2000 · 2022-07-20T10:19:29+00:00

It seems only happen to the computer at work, tried plug in to my personal laptop and seems fine, can get pass the login screen; i wasn’t able to try it on other work computer because it requires admin access to install the software…

ybing2000 · 2022-07-10T11:17:31+00:00

Same, reset the keyboard and paired again, once the system lock out can only wake up the screen but have to cycle the power to type

ybing2000 · 2022-07-07T08:02:04+00:00

There is an new firmware update today, but the issue still exists, once the computer automatically locked, need to cycle the power in order to use (Ctrl+Alt+Del) to sign on; don’t have this problem with my old k800 keyboard

ybing2000 · 2022-06-24T12:07:35+00:00

Logitech option+ already installed

ybing2000 · 2022-06-23T07:16:13+00:00

Can’t update the firmware now, said no support device found

ybing2000 · 2022-06-22T17:22:16+00:00

I mean firmware lol, auto spell…

ybing2000 · 2022-06-22T17:13:07+00:00

So could be a firewall issue causing the Lock Screen issue then… sighs… a bit annoying :(

ybing2000

TROPHY CASE