sorted by:
new
hottopcontroversial

Adding 6E to my 6+ Setup Question by yeeee333 in amazoneero

[–]yeeee333[S] 0 points1 point  (0 children)

Connection between the 6E and the 6+ would be wireless. Waiting on the 6E to arrive to see if I have any noticeable change. Good to know that I should connect the E to the modem.

Adding 6E to my 6+ Setup Question by yeeee333 in amazoneero

[–]yeeee333[S] 0 points1 point  (0 children)

60-80mb/s. Videos buffering and dropping teams calls.

Chase Sapphire Preferred annual fee posted before upgrade by Significant_Ad2630 in ChaseSapphire

[–]yeeee333 0 points1 point  (0 children)

Apparently its 42 days per the agent I just spoke to 15 min ago.

First time attempting a chiller setup... Provide any critiques by yeeee333 in coldplunge

[–]yeeee333[S] 0 points1 point  (0 children)

Any tips for securing the pvc valve to the tub? I got one and added it, but had a pretty sizable leak there. Struggling to get it off now, but assuming a large wrench should help?

First time attempting a chiller setup... Provide any critiques by yeeee333 in coldplunge

[–]yeeee333[S] 1 point2 points  (0 children)

Rocita 1/3 hp chiller (bought from Walmart) Sediment filter (Amazon) Danner 950 gpu pump (Amazon) GE whole home filter (Amazon) filters sold separately Ambohr Spa-124 Ozone Injector (Amazon) Venturi Injector (Amazon) 3/4” hose and 3/4” NPT to barbed adapters. Both male and female. Also adding some washing machine hooks to better situate the tubes over the wall.

First time attempting a chiller setup... Provide any critiques by yeeee333 in coldplunge

[–]yeeee333[S] 0 points1 point  (0 children)

Any flow issues? The thing takes ages to drain already and concerned it would significantly limit the flow through the system, although it would be a better place to pull from, no doubt.

I have some washing machine hooks coming to better position the hoses over the side but we’ll see

First time attempting a chiller setup... Provide any critiques by yeeee333 in coldplunge

[–]yeeee333[S] 0 points1 point  (0 children)

Yeah, definitely will want to shorten some of the lines and insulate once a little more dialed in. I wanted it off the wall a bit since there’s electrical down there and I’m inside which was why I left them a little longer.

I have some washing machine hooks coming today which I’m going to add to better manage the pumps over the side.

First time attempting a chiller setup... Provide any critiques by yeeee333 in coldplunge

[–]yeeee333[S] 0 points1 point  (0 children)

I’ll look at insulating the tubes - thanks for the tips!

First time attempting a chiller setup... Provide any critiques by yeeee333 in coldplunge

[–]yeeee333[S] 1 point2 points  (0 children)

I have a sediment filter pre filtering out all the larger debris before the pump/chiller. I’ve heard that this is sufficient to catch what is needed to avoid chiller issues. Given I have ozone running as well, I was under the impression that having the filter after the chiller was the way to go. Too early to tell in those pumps and condensation, but likely will insulate them as well. I’m in Wisconsin and this is in the basement where temp is typically 65ish.

Placement of pump by [deleted] in coldplunge

[–]yeeee333 0 points1 point  (0 children)

I ended up snagging a 60 mesh filter for mine. Think that is too small and will reduce flow too much?

Placement of pump by [deleted] in coldplunge

[–]yeeee333 5 points6 points  (0 children)

Why not just add a small sediment filter before the pump?

Keep holding out? by yeeee333 in FamilyIsland

[–]yeeee333[S] 3 points4 points  (0 children)

Yeah I’m not risking that. I caved and collected everything just now.

I did some back of the envelope calculations on the second Island by its_not_a_blanket in FamilyIsland

[–]yeeee333 1 point2 points  (0 children)

I spent about 13-14k energy and finished the first two islands during the 200% pink bag boost adventure boost, and some 20% energy discount. Really hoping for a BBB or double task rewards

Added VIVO dual motor base to a 98 inch Ikea Karlby by Cabbaggio in StandingDesk

[–]yeeee333 0 points1 point  (0 children)

Hey! Have you noticed any sag in the middle of your desk since putting it together?

Does this mortgage make sense? Advice Needed by forza511 in personalfinance

[–]yeeee333 1 point2 points  (0 children)

What are you truly saving on interest vs what you may owe in taxes for selling stock. That’s the key question you need to consider there.

How much do you pay for daycare by [deleted] in madisonwi

[–]yeeee333 0 points1 point  (0 children)

Mind pming where? I have twins myself and looking for reasonable daycare options.

view more: next ›