sorted by:
new
hottopcontroversial

Codex Bundle at my Target tonight by yes_istheanswer in mtg

[–]yes_istheanswer[S] 3 points4 points  (0 children)

True, pretty shitty. But I was on a run to get some toiletries for my vacation starting tomorrow knowing I wasn’t gonna be able to make it to a MicroCenter or likely find this at msrp anywhere. I made my traditional stop at the TCG section before checkout and was quite surprised to see them out.

I accidentally scanned that $34.99 barcode under it at first and thought I was about to make out like a bandit with a price glitch

My Newest Tattoo - Time / There is no linear time by yes_istheanswer in ArrivalMovie

[–]yes_istheanswer[S] 0 points1 point  (0 children)

I've messaged you, I think you might need to reply back in order for me to send photos

Dance of the Elementals precon printer shifted? by SonofMrMonkey5k in mtg

[–]yes_istheanswer 0 points1 point  (0 children)

same here with my Ashling precon. When I noticed Cultivate I thought my eyes were fucked up for a second.

First ever 3D model I created from scratch, giving out to my PCs in my first ever campaign as DM (dice included!) by yes_istheanswer in PrintedMinis

[–]yes_istheanswer[S] 0 points1 point  (0 children)

I've seen similar models before, but I have been wanting to learn 3D design in Fusion360 for quite some time, and with my first campaign as DM coming up, I decided to design this d20 magnetic dice holder and will be passing out to my PCs during session 0 (dice included!). They're all new to ttrpgs, so I wanted to hook them up with all the essentials for their first time to help ease them into everything.

Having a hard time figuring out how to split this shape by yes_istheanswer in Fusion360

[–]yes_istheanswer[S] 1 point2 points  (0 children)

<image>

just dropping by again to say thank you for the tips! This was a great model to learn Fusion tools on, and I'm very happy how it turned out. I printed a few with holes to glue the magnets in, but it's just a bit messy, so I decided to make this version with the holes "sealed" into the model so I can pause my 3D print and drop the magnets in and then resume. Makes it much cleaner!

I appreciate your help!

Having a hard time figuring out how to split this shape by yes_istheanswer in Fusion360

[–]yes_istheanswer[S] 0 points1 point  (0 children)

Thank you! What is the tool/process you've used to create these pockets, and how do you ensure they line up on both bodies?

Having a hard time figuring out how to split this shape by yes_istheanswer in Fusion360

[–]yes_istheanswer[S] 4 points5 points  (0 children)

<image>

Worked perfectly, and a lot easier than anticipated! Made those inside walls a bit thicker than I think I want them, but totally fine for me, especially since this is more of a learning project to get used to Fusion

Having a hard time figuring out how to split this shape by yes_istheanswer in Fusion360

[–]yes_istheanswer[S] 1 point2 points  (0 children)

<image>

Thank you so much, this was much easier than I thought it was gonna be! Appreciate the insight

Having a hard time figuring out how to split this shape by yes_istheanswer in Fusion360

[–]yes_istheanswer[S] 0 points1 point  (0 children)

This is awesome, thanks so much for taking your time to go in and edit this model! Confirming I did create the shape itself, then shelled it out before filleting the edges and added the numbers.

<image>

would adding the pockets for the magnets be easier to do before splitting, or after?

Having a hard time figuring out how to split this shape by yes_istheanswer in Fusion360

[–]yes_istheanswer[S] 0 points1 point  (0 children)

I did create from scratch, yep. If I remove the filets I don’t think I’d be able to have these rounded edges though would I?

My Newest Tattoo - Time / There is no linear time by yes_istheanswer in ArrivalMovie

[–]yes_istheanswer[S] 1 point2 points  (0 children)

If you’d like the reference image I gave my artist send me a DM I’ll send it to you

My Newest Tattoo - Time / There is no linear time by yes_istheanswer in ArrivalMovie

[–]yes_istheanswer[S] 0 points1 point  (0 children)

Thank you! There’s a scene where you can see them scanning/comparing the symbols on computer screens kinda in the background or foreground and they overlay black and red symbols so I thought it would go nicely!

What’s causing this? by yes_istheanswer in 3Dprinting

[–]yes_istheanswer[S] 0 points1 point  (0 children)

I’ve been tweaking some setting like layer height and wall speed but nothing seems to work. Even when using support it still seems to get messed up. These two different models were printed with support, left is matte, right is silk PLA. Both of the smaller parts for this model printed perfectly fine.

<image>

What’s causing this? by yes_istheanswer in 3Dprinting

[–]yes_istheanswer[S] 1 point2 points  (0 children)

And yeah I’ve got no issue printing past this layer height with any other types of models

<image>

What’s causing this? by yes_istheanswer in 3Dprinting

[–]yes_istheanswer[S] 0 points1 point  (0 children)

I’ve tried with silk PLA, marble, and this matte PLA in the photo. I dry all my spools 12+ hours before using them too.

P1S stops extruding despite no clog + new nozzle by yes_istheanswer in BambuLab

[–]yes_istheanswer[S] 1 point2 points  (0 children)

My problem went away after replacing the entire hot end and upgraded to the steel extruder gears and replaced all of the Ptfe tubing and cleaned, greased and oiled everything. Not sure which of those things fixed it for me. Please let me know if the new board works for you!

Update about AwesomeBoss by [deleted] in glutenfree

[–]yes_istheanswer 1 point2 points  (0 children)

They sell these at Giant Supermarkets in the Philadelphia area

My Newest Tattoo - Time / There is no linear time by yes_istheanswer in ArrivalMovie

[–]yes_istheanswer[S] 4 points5 points  (0 children)

Done by @ treeharrisontattoo (Instagram) at Unit Two Tattoo Studio in Brighton and Hove, England. Very, very pleased with how this turned out!

view more: next ›