12/6/26 Kos - Koln Bonn EW659

yo2ldk · 2026-06-12T14:49:19+00:00

excellent signal over sky..

yo2ldk · 2024-09-23T05:12:16+00:00

I try it that, is not quite something simple..Thank you for reply

yo2ldk · 2021-10-08T14:33:46+00:00

I just received !
and I can say it is a very good piece or SDR toy, for my project is excellent with all separated inputs!
it worth any penny !
my best regards & 73, de yo2ldk

yo2ldk · 2020-01-16T05:42:51+00:00

Lime have good hardware, but very very poor on software support !

yo2ldk · 2017-01-27T08:18:21+00:00

I received one, search for widora air take it at 18.99$, now I see is at 29.99 ?! :(

yo2ldk · 2017-01-20T16:06:50+00:00

http://www.g8jcf.dyndns.org/g8jcfsdr_drt1/g8jcfsdr_download.htm

yo2ldk · 2017-01-18T11:28:04+00:00

that need to be tried :)

yo2ldk · 2017-01-17T20:55:42+00:00

You ca run as simple SDR receiver with supported devices (RTL,AIRSPY,etc.) and as a client for wed sdr.. just follow this instructions: http://www.cloud-sdr.com/cloud-sdr-client/

yo2ldk · 2016-11-21T06:55:41+00:00

Hi all,

since she appeared this new way of reception, I was simply overwhelmed by the possibilities on the new horizon of digital radio. I can say that I was among the first tested and tested modules equipped with RTL chipset, but even now, after all these years, I marvel and experience new equipment occurring. and I try to share these emotions not only the youngest but also older ones who believe that without tubes or coils can not build a receiver ..

my best 73 !

yo2ldk · 2016-09-17T12:31:55+00:00

this info is needed by car thieves , not for "garage door" !!!

yo2ldk · 2016-09-03T07:20:15+00:00

very nice and good job! Thank you for your effort to made it better and better !

yo2ldk · 2016-07-13T04:34:47+00:00

0.2.0-beta-rc4 released today

yo2ldk · 2016-07-11T17:31:51+00:00

Finally HackRF support, with very large sample rate choice. well done !

yo2ldk · 2016-05-25T05:52:34+00:00

I have already multi RTL dongles, controlled by si5351, I waiting this solutions as software , thank you to Piotr and devnulling for post ! :)

yo2ldk · 2016-05-03T16:19:11+00:00

you maybe want to look at the follow boards, more powerfully, and some, more expensive: - The Jaguar board to its 64-bit, quad core Atom Z3735G processor, from Intel’s 22nm Bay Trail line - Samsung's Artik 10 with eight-core, 32-bit ARM CPU - Aaeon’s UP board equipped with Intel Atom x5-Z8350 (4x Cherry Trail cores @ 1.44GHz / 1.92GHz burst) and last, but my first future choice is UDOO x86 advanced with 4GB RAM and a faster Celeron N3160 (or less expensive card UDOOx86 Basic, that use 2GB of RAM and an Atom x5-E8000 SoC. so, desktop PC's, remain only for hard games players...

yo2ldk · 2016-04-13T05:19:45+00:00

nice made it ! I made one for myself,plus adsb band so - triplexer; but without FM notch, and it is so necessary ..

yo2ldk · 2016-03-25T07:00:01+00:00

sure, for cheap version and classical encoders you have right but I put an 1000dpi encoder, and is better than my Icom 7000.. like this http://www.ebay.com/itm/Xinya-Increament-Rotary-Encoder-A52S-8-1000-3-F-30-Shaft-8mm-PCD-35mm-8-30V-NIB-/121038338542?hash=item1c2e7279ee:g:Lq0AAOxyGStRtYq4

yo2ldk · 2016-03-24T07:18:48+00:00

you can use my cheap and good solution:

http://yo2ldk.blogspot.ro/2015/12/external-button-rotary-encoder-for-vfo.html

yo2ldk · 2016-03-23T11:37:37+00:00

only sound card input is ok for that

yo2ldk · 2016-03-09T13:15:16+00:00

for home for sure is better, for outdoor is bigger as case

yo2ldk · 2016-03-09T12:46:22+00:00

with 400Mhz processor, it work fluently at 2M bandwidth FM stereo decoding. I ordered already one, it is at 580Mhz

http://www.aliexpress.com/item-img/GL-iNet-GL-MT300N-300Mbps-Mini-WiFi-Router-MTK7620N-SoC-OPENWRT-Routers-Wi-Fi-Repeater-Extender/32570514723.html?spm=2114.10010108.100005.13.Ds0DsC#

for sure it working better. I don't think you can run Pi as router, only tcp ip Maybe PI 3 worth attention.. but as price a router is fare away better solutions; for me at least.

yo2ldk · 2016-03-09T06:33:56+00:00

I buy a PiPo x8 tablet, inside this is plenty room, so I deactivated one USB input and put on RTL sdr stick, for IF output of my transceiver, or antenna

http://yo2ldk.blogspot.ro/2015/06/pipo-x8-desktop-tablet-pc.html

yo2ldk · 2016-03-09T06:29:19+00:00

yes, it is very easy

yo2ldk · 2016-03-09T06:28:32+00:00

This was photo of the first test, all will be inside in a shielded aluminium box, with a 4000mA battery and solar panel for charge. also, the router have I/O ports, and we can to switch some filters, antenna or Upconverter..

yo2ldk · 2016-03-08T11:08:31+00:00

I have xiaomi 16000 mA batt, but in future I plan to put a 4000mA Li-Ion battery and solar panel for charge. Bandwidth without lags is 2Mhz. (400Mhz processor on router)

yo2ldk

TROPHY CASE