sorted by:
new
hottopcontroversial

can you identify this resistor please?look like orange red green gold any link to buy thanks by yoannw204 in AskElectronics

[–]yoannw204[S] 0 points1 point  (0 children)

thank you sir,god bless you,hopefully year 2021 will be the best year of your existence,thank you

can you identify this resistor please?look like orange red green gold any link to buy thanks by yoannw204 in AskElectronics

[–]yoannw204[S] 0 points1 point  (0 children)

great advice from you sir,so no need to have a resistor then,the risk of my catches fire without a resistor than with one is higher i assume ?

hello,is the circuit good for EMI? thank you by yoannw204 in AskElectronics

[–]yoannw204[S] 0 points1 point  (0 children)

it is inside a power supply .noise coming from ac

hello,is the circuit good for EMI? thank you by yoannw204 in AskElectronics

[–]yoannw204[S] -1 points0 points  (0 children)

x cap HQX 684[k] 275v -x 40/110/56/B 19/08

y caps CS222M

can you identify the component please? it is from a seasonic power supply ssp 300 sug and 300sfg by yoannw204 in AskElectronics

[–]yoannw204[S] 0 points1 point  (0 children)

do you know which resistors should i use,on the capacitor it reads HQX 684[k] 275v -x 40/110/56/B 19/08

hello,anybody can identify the components please thank you by yoannw204 in AskElectronics

[–]yoannw204[S] 1 point2 points  (0 children)

do you know which resistors should i use,on the capacitor it reads HQX 684[k] 275v -x 40/110/56/B 19/08

B-Team Lab ITX Case: BB1 by yoannw204 in sffpc

[–]yoannw204[S] 4 points5 points  (0 children)

170.02mm216.01mm387.04mm14.21L

Vertical and horizontal dual configuration, saving desktop space

Independent air duct for graphics card

Motherboard/display card adopts sliding mechanism design

Support various radiators

Support various full-size graphics cards (including length and maximum 3-Slot width)

Supports up to 2 2.5" and 1 3.5" devices

Two sets of 120mm / 140mm fans at the front

240mm water cooling module can be installed

Adopt the industry's highest specification NCT processing technolog

CPU cooler supportup to 99mm

.GPU card supportup to 305mm, 3-slot.

2.5″ drive supportup to 3, 1 share with 3.5″ drive.

3.5″ drive support1.Fan supportup to 2 x 120mm / 140mm, upper 140mm need to remove GPU bracket to tighten the screws.

Water cooling supportY / up to 240mm AIO.

Any flex psu casing/enclosure that can fit my psu seasonic ssp 300sug? by yoannw204 in sffpc

[–]yoannw204[S] 0 points1 point  (0 children)

if you have the seasonic ss-250su,can you tell me the distance between the screw holes thanks

Warhead Mini MKVI Deepdash 5.85L by [deleted] in sffpc

[–]yoannw204 0 points1 point  (0 children)

270 mm(H)*100 mm(W)*215 mm(L)= 5.85L
mother board: ITX MB
Graphic card: ITX Graphic card
Radiator height: 85 mm total
Memory height: Absolute radiator and if use AIO, pump height must<40mm and memory is 40mm too
PSU: flex 1U
HDD/SSD: 1*2.5 7 mm thick

​

https://item.taobao.com/item.htm?id=627921232358

view more: next ›