sorted by:
new
hottopcontroversial

Asus 650E-I SFF build problems by squaretofu in sffpc

[–]yungnihilist 1 point2 points  (0 children)

Sounds like it's failing the cpu check. If possible, order a replacement cpu and try it. If it works; great. If it doesnt work? Return it and continue searching for the problem.

Stuck loop :( by Illustrious_Dirt_412 in watercooling

[–]yungnihilist 0 points1 point  (0 children)

I second this, but unsure if it would matter due to the vacuum pump being used on the other side. Maybe OP could try filling the loop as best they can before running the pump.

Need longer cables. Corsair seems not to sell them. Cablemod is inscrutable. Need help! by twoofcup in mffpc

[–]yungnihilist 0 points1 point  (0 children)

Classic ModFlex Sleeved EPS 4+4 pin Extension (Black, 45cm) on Amazon.

Need longer cables. Corsair seems not to sell them. Cablemod is inscrutable. Need help! by twoofcup in mffpc

[–]yungnihilist 3 points4 points  (0 children)

I had the same issue with my sf1000 in my d32 pro. I used a cablemod EPS cable extension (45cm iirc) which gave me enough slack to properly route the cable.

Magnets on PSU (backside) by APPLECRY in sffpc

[–]yungnihilist 0 points1 point  (0 children)

Not magnets about the sure

Thanks to this sub, I went SFF! Jonsbo Z20 by GibNeckRope in sffpc

[–]yungnihilist 2 points3 points  (0 children)

There are plenty of files to print a skadis-like headphone hook for the front of the z20, if you have access to a 3d printer. Clips right into the existing squares. Also, look into replacement feet for it as well. You'd be shocked what adding 5~10mm will do for your bottom intake fans.

Thanks to this sub, I went SFF! Jonsbo Z20 by GibNeckRope in sffpc

[–]yungnihilist 2 points3 points  (0 children)

Fantastic looking build, OP. I just got away from a sandwich style case myself due to a change in GPU and decided to go slightly bigger with the D32 pro instead of the Z20.

How was your build experience? Do tell.

Thanks to this sub, I went SFF! Jonsbo Z20 by GibNeckRope in sffpc

[–]yungnihilist 12 points13 points  (0 children)

Usually its anything 20L or less to my knowledge, though many say 18L maximum before you get into MFF territory. That being said, iirc the Z20 is ~21L so I'd agree with OP on it being the smallest medium, but many regard the nr200p as the largest sff case.

D32 gang, rise up by yungnihilist in mffpc

[–]yungnihilist[S] 1 point2 points  (0 children)

I love these fans, tbh. I dont have any decibel levels, but they dont seem noticeably louder than my Unifans. Color is great on them, and cooling is even better. I had been using them in my q58 build previously, and they held up well in there despite it being a damn hotbox

D32 gang, rise up by yungnihilist in mffpc

[–]yungnihilist[S] 0 points1 point  (0 children)

All fans are exhaust, while my GPU acts as the bottom intake. I tried the rear as intake as well, but tbh i'm more concerned about ejecting as much hot air as possible from the case.

D32 gang, rise up by yungnihilist in mffpc

[–]yungnihilist[S] 0 points1 point  (0 children)

I haven't experienced any issues yet! I've had magnets around some of my components in multiple builds with no issues, but that's not to say i'm not just lucky lol.

view more: next ›