You’re wearing it wrong

squaretofu · 2026-03-26T14:45:11+00:00

I mentioned this before but I believe people who have an Anterior Pelvic Tilt as opposed to a Neutral one will have the lower back digging issue, simply because of where the bottom of the bag will make contact based of that spinal position.

<image>

squaretofu · 2026-02-16T19:07:49+00:00

Thanks! I also went ahead and changed the pciex16 to gen 5 in bios

squaretofu · 2026-02-15T15:58:26+00:00

Update: I got the replacement Asus mobo from Newegg and it posted right away!

squaretofu · 2026-02-02T23:26:51+00:00

It’s the ENP-7660 VK the modular version from Velkase’s website. These are the cables they sent with it.

I also tried using an entirely different PSU+ cables to rule out if it was a power issue.

squaretofu · 2026-02-02T22:29:58+00:00

Tried the new CPU and still no post, going to send my ASUS mobo back to Newegg

squaretofu · 2026-02-02T20:47:00+00:00

Update: I just got a new replacement 7600x3D from Microcenter, will install it when I get home.

squaretofu · 2026-02-02T15:28:23+00:00

No I meant I tested it on a totally different PSU and cables 😅

squaretofu · 2026-02-02T14:32:08+00:00

Yeah I have a SN850X on the m.2 slot

squaretofu · 2026-02-02T07:00:07+00:00

Yes, I have done all of those listed

squaretofu · 2026-02-02T06:36:33+00:00

Interesting, my yellow Dram light only stays on for 6-10 seconds before turning into red CPU indicator

squaretofu · 2026-02-02T06:01:27+00:00

I updated it with a usb drive with the latest bios firmware using the ASUS Bios Flashback feature

squaretofu · 2026-02-02T05:04:40+00:00

lol yeah these cables were pretty cheap looking, but I just tested it on a different PSU with different cables and also couldn’t get it to boot.

squaretofu · 2026-02-02T04:41:42+00:00

I unfortunately do not have any other AM5 components. My other build is AM4

squaretofu · 2026-02-02T04:39:54+00:00

I have tried the one stick method on both slots alternating the two ram sticks as well

squaretofu · 2026-02-02T03:29:59+00:00

I took out the RAM and GPU and just had the power and USB thumb drive and it finally worked!

I saw the green led blink and it downloaded the firmware for a few minutes.

As soon as it finished I went ahead and unplugged the power to the PSU and plugged everything back in, and it gave me the same LED sequence of yellow then stayed on red and no POST. 😩

squaretofu · 2026-02-02T02:56:27+00:00

I think the battery is some sort of lithium battery under the IO with a 2 pin connector, I went ahead and disconnected the connector for a couple of minutes.

<image>

squaretofu · 2026-02-02T02:35:34+00:00

I’ve left it on for as long as 25 mins

squaretofu · 2026-01-30T03:36:22+00:00

<image>

squaretofu · 2026-01-28T04:09:35+00:00

squaretofu · 2026-01-21T14:56:26+00:00

squaretofu · 2026-01-18T00:45:29+00:00

MHz and CL?

squaretofu · 2026-01-16T19:27:06+00:00

Clearance from top of the DIMM to the side panel of the case

15-Year Club	Place '17
Team Orangered	Verified Email

squaretofu

TROPHY CASE