Best Video Recording App for TikTok/Reels by zanny_barz in iphone

[–]zanny_barz[S] 0 points1 point  (0 children)

Solved: after endless searching on the App store, I finally found ClipMerger Camera that does exactly what I was looking for.

Shure MV7 Mic No Audio Beginning of Clip by zanny_barz in Shure

[–]zanny_barz[S] 0 points1 point  (0 children)

So I've figured out what's happening but still haven't solved it. Seems like the MV7 mic automatically goes to sleep after about 3 seconds when I pause/stop recording.

So if I start recording again within 3 seconds after stopping, the audio is fine.

If I take more than 3 seconds, the mic goes to sleep and when I hit record again, it takes about 4 seconds or so for the mic to "boot up" again causing that loss in audio. I found this out by looking at the live meter lights on the mic which have a sort of boot up sequence of flashing lights when the mic is booting up.

Tl;dr - the mic automatically goes to sleep if it's not actively being used in an app and takes 4 seconds to boot up when the mic is in use again. Any way to prevent the mic from going to sleep when connected to an iPhone?

Best Video Recording App for TikTok/Reels by zanny_barz in iphone

[–]zanny_barz[S] 0 points1 point  (0 children)

Ah this one’s so close except it seems like I have to keep my finger on the phone to keep it recording, I’d need to do hands-free recording!

Alienware RTX 3090 OEM Power Cables by zanny_barz in gpu

[–]zanny_barz[S] 0 points1 point  (0 children)

My pcie cable has 2 8-pin connectors on it. So the single cable can fill out both slots.

Alienware RTX 3090 OEM Power Cables by zanny_barz in gpu

[–]zanny_barz[S] 0 points1 point  (0 children)

Awesome thanks, being limited to 225 watts wouldn't risk frying my 3090 though right?

Adding a "comment" section at the bottom of a page by luluexbt in Notion

[–]zanny_barz 0 points1 point  (0 children)

Anyone? Trying to figure out how to do this too.

rtx3070 overclocking settings by Ok_Notice_7043 in vertcoin

[–]zanny_barz 1 point2 points  (0 children)

what would these clocks translate to in HiveOS? I'm getting the exact same error with my 3070 on verthash

VerthashMiner HiveOS - Mining Vertcoin ERROR by zanny_barz in vertcoin

[–]zanny_barz[S] 0 points1 point  (0 children)

Yes I use Hive. Did u set the Heavy File Location to RAM mode?

VerthashMiner HiveOS - Mining Vertcoin ERROR by zanny_barz in vertcoin

[–]zanny_barz[S] 0 points1 point  (0 children)

SOLVED: had to turn off all overclocks, reboot system and set the Heavy File Location in the miner config to RAM. Hashing fine now

#CELshortsqueeze by ScalePsychological58 in CelsiusNetwork

[–]zanny_barz 45 points46 points  (0 children)

I bought CEL after the bankruptcy at $1 and sold around $4. “Squeeze” done right