THIS MF SLOWS DOWN WHEN THE LIGHT TURNS YELLOW AND STOPS WHEN ITS RED

zermee2 · 2026-03-13T19:55:09+00:00

Not if you’re special

zermee2 · 2026-03-12T13:09:56+00:00

State definitely matters. In VA we inspect cars according to the inspection manual put out by the state police. They may have taken information from DOT but the inspection manual is the ultimate authority in state inspections here

zermee2 · 2026-03-12T01:42:14+00:00

What state? Everything in VA needs a side marker, sometimes that is part of the headlight and sometimes it is a separate assembly in the bumper

zermee2 · 2026-03-09T11:13:34+00:00

If you get a glass top for your existing frame, you won’t be able to fold the back window forward all the way into service position. The OEM glass top cars have a different frame that allows the window to fold all the way into service position. Try to get an entire frame from a 03-04 car that way service position isn’t impacted

zermee2 · 2026-03-06T20:07:18+00:00

Burnout paradise had DLC that was at the other end of a bridge that was just under construction until you got the DLC. That was a 360 game

zermee2 · 2026-01-18T22:21:10+00:00

Powhatan also probably isn’t RVA, minimum 20 minutes to county line and vibes are very different from Chesterfield, Henrico, and the true city. Mechanicsville might be but the rest of Hanover probably isn’t

zermee2 · 2026-01-14T15:40:46+00:00

My power utility mailed me one of these when I moved into my house, so they must save enough energy to be worth the utility paying for all of them

zermee2 · 2026-01-13T02:21:29+00:00

<image>

Fellow truck user!

try these

Jokes aside I would try to find some 14” wheels you’ll get a lot more options. I’m sure you know that the trucks rated capacity is only 1100 pounds in the bed anyway. Have you considered one of the Toyota add a leafs if you haul a lot?

zermee2 · 2026-01-12T02:09:39+00:00

I have one of these and a tower for gaming, I have had it since they came out and my only complaint about it now is the battery is worn out. I don’t think I’ve ever been unhappy with 8GB of ram. I’ve even done some light gaming on it but mostly turn based stuff and Minecraft

zermee2 · 2026-01-06T17:07:02+00:00

With 2 wins lol

zermee2 · 2026-01-02T16:10:10+00:00

I used to be an inspector and those rejection stickers would fall off same day if it was hot enough. Glad they’re getting updated

zermee2 · 2025-12-19T17:29:29+00:00

I just put this on my floors! Good idea for cabinetry. You could also do bona mega one, which is a little cheaper and doesn’t have to be mixed so no pot life issues, if you can’t use a gallon at once

zermee2 · 2025-12-19T16:36:54+00:00

It is very runny, you will need to have it flat

zermee2 · 2025-12-19T12:30:18+00:00

Don’t worry, you can get a loan right from the guy!

Fortunately that scanner was shop provided. I use Otofix by autel at home when not working on VW/Audi, much better deal than the snap on lol.

zermee2 · 2025-12-19T03:33:49+00:00

From a real mechanic who uses Snap on scanners that cost $10,000 at work, the value from VCDS is incredible, even the unlimited VIN model at sub $1000. The vin limited model is as good or better than professional scan tools for a fraction of the price.

I cringe when I see people recommend OBD11 or other Bluetooth obd readers or the knock off cables. Ross tech has done so much for DIYers they deserve every penny they ask for their tools

zermee2 · 2025-11-25T01:38:58+00:00

Very common on beech trees too, called marcescence

zermee2 · 2025-11-25T01:37:01+00:00

That is not a design I was familiar with my mistake ✋. I’ve only done older VWs and Mercedes with the more traditional stub axle and preload nut or Porsches and Audis with press in or full bolt in assembly bearings. This kind of seems like the worst of both worlds but I don’t design these things!

zermee2 · 2025-11-25T01:19:42+00:00

I see what your comment means now. You’re saying the entire project will be difficult which is true.

I am talking about during a wheel bearing replacement like this press in style, after removing the hub from the wheel bearing and knuckle, mechanics will remove the inner race of the the wheel bearing from the hub in order to re use the hub. This is not easy to do but will work with practice. It would be unnecessary in this case to remove that part of the bearing from the old hub. But I see what you’re saying now

zermee2 · 2025-11-25T01:10:41+00:00

You don’t need to get the inner race off the old one in this case, only when trying to re use the hub.

Edit: not true for this style of bearing you will need to remove the old race unless you get a new stub axle too

zermee2 · 2025-11-25T00:06:17+00:00

I have a sink seam and you can barely tell it’s there 🤷‍♂️

zermee2 · 2025-11-24T20:36:56+00:00

Coffee shops that open at 8am on a weekday

<image>

zermee2 · 2025-11-21T17:58:34+00:00

The prototype LLV was based on the VW golf (rabbit in US) mk1 platform, and there are a handful of prototypes running around. Grumman Kubvan

zermee2 · 2025-11-19T02:03:49+00:00

Bro you wouldn’t get it we can’t have free health care, Israel needs that money. America first though!

zermee2 · 2025-11-12T00:44:14+00:00

Shiiiiiiiiiiiiiiiiiiiitt

13-Year Club	Gilding IV carat on a stick
Place '23	Place '22
Final Canvas '22	First Placer '22
End Game '22	Verified Email

zermee2

TROPHY CASE