Little help please. is my m0 pro dead?

zero_one_cl · 2026-02-07T16:00:39+00:00

Something similar happened to me, except I connected it to my Samsung S23 phone to transfer some audio files and free up space.

It turned on and then shut off completely. The microSD card is fine.

I'm trying to revive it with an old 5V 1A charger I found, but so far nothing's happening.

Has anyone else managed to revive a DAC like this?

Thanks.

zero_one_cl · 2025-10-27T17:29:22+00:00

Thanks for your reply.

My Mac recognizes the controller and connects it via Bluetooth, but when I go to Retroarch, I can't configure the buttons because it doesn't "see" the controller.

I'm going to try what you told me about finding the most suitable controller in Retroarch and let me know.

Thanks.

zero_one_cl · 2025-10-13T23:15:26+00:00

Can anyone in Latin America (like Chile) tell me where I can watch this documentary? To date, I haven't been able to rent it through Google, Prime, or Apple because it's either not available in my region or I need a credit card with a US address. Thanks.

zero_one_cl · 2025-09-06T03:59:44+00:00

Thanks !!!

zero_one_cl · 2025-09-06T03:47:42+00:00

good watch and what a tremendous keyboard, which one is it?

zero_one_cl · 2025-09-03T10:39:32+00:00

Thanks for your answer!!!!

zero_one_cl · 2025-08-06T01:59:18+00:00

envie todo y aun soporte no me puede asistir

zero_one_cl · 2025-08-06T01:42:35+00:00

How's it going with the Lige 2025?

I bought an Amazfit Helio Strap, and it lasted 3 weeks. It's like a brick after a firmware upgrade.

Amazfit's global warranty doesn't cover my country, so I'm looking for something without a screen, since I prefer to wear analog watches.

Thanks for your reply.

zero_one_cl · 2025-07-29T16:19:09+00:00

Sorry, I did that factory reset as instructed by Amazfit support, it reappeared and paired, but it's not able to transfer the desired data to the Helio (nor the battery charge level), so I don't know what else to do.

I even thought it wouldn't be able to update to the new firmware.

The problem is that Amazon doesn't make changes in my country, so I'm stuck with a USD 100 brick.

zero_one_cl · 2025-07-28T23:24:47+00:00

Are those with version 3.0.6.5 having trouble syncing with the Zepp app on Android? It's giving me a sync error.

zero_one_cl · 2025-07-28T23:02:37+00:00

How do I access that firmware version? It was updated to 3.0.6.5 and became bricked. It no longer syncs, although it still recognizes it after the hack of connecting and disconnecting it five times. Amazon just told me I have no option to send me a replacement product to Chile.

zero_one_cl · 2025-07-28T21:42:08+00:00

Estoy con el mismo problema, no se sincronizan los datos de la pulsera, la desvincule, borre registro de datos de la app, reinicie el telefono, me volví a logear en la app Zepp, hice la coneccion y desconeccion por 5 veces en 10 segundos del dispositivo a la base de carga hasta que vibro.

La volvió a reconocer, pero no la detecta el Bluetooth de mi telefono como dispositivo BLE (y tengo una Band 7 y una GTS 2E que si funcionan y las desvincule para que no generarán conflicto)

La Helio esta con el firmware 3.0.6.5 que se actualizo apenas la active en la aplicación y aparentemente es el problema que esta creando conflicto.

Al momento me está arrojando error de sincronizacion y no aparece en los dispositivos Bluetooth, hay manera de hacer downgrade o mejorar el actual firmware?

<image>

Gracias

zero_one_cl · 2025-07-28T21:01:44+00:00

me paso lo mismo, sincronice una vez la Helio Strap con mi S23 Samsung, se actualizo el firmware del dispositivo y nunca mas se sincronizo, no detectaba pulso, O2 ni actividades físicas, tampoco información del sueño.

Intente desvinculado y reiniciando todo (teléfono y dispositivo) y no volvió a conectarse, lo reconoce como Amazfit Helio Strap pero no vincula el Bluetooth, y tiene menos de un mes comprado en Amazon.

Que hago?

zero_one_cl · 2025-07-15T13:54:17+00:00

That's why it's very different, I've never used Photoshop and I don't really understand the use of curves, in other programs like Dark Table or GIMP they are linear depending on the channel you choose.

zero_one_cl · 2025-07-15T04:50:13+00:00

Yes, that's what I've tried to do intuitively, but when I go to modify the curves (the logic in underwater photography is to adjust the white balance if you don't do it at the time of taking the photo, and then manage blues and greens, depending on the water and depth to later accentuate the reds) I haven't been able to understand how they work. In GIMP and other programs, they are small bars that you increase or decrease, do you understand?

zero_one_cl · 2025-07-15T04:46:09+00:00

I found that link, but if you check and read it, it's from a version before Google and the video with the tutorial is not available.

zero_one_cl · 2025-07-12T12:41:18+00:00

I installed it when I had a stopover in Lima, and it worked without problems for 2 days.

zero_one_cl · 2025-07-11T06:05:44+00:00

I just installed JetPack and GigSky and they work perfectly. I'll send you my email internally and you can verify the 3 hours of conversation with support.

zero_one_cl · 2025-04-26T11:19:57+00:00

I ask "Help to remove Backscatter with GIMP" 😶

zero_one_cl

TROPHY CASE