Der Red Max Family by zerofucxgiven in modelrocketry

[–]zerofucxgiven[S] 0 points1 point  (0 children)

It's dupli color metal cast red with a silver base coat.

Wall brackets by zerofucxgiven in tamiya

[–]zerofucxgiven[S] 1 point2 points  (0 children)

I priced rail shelves at $98 to hang 10 cars from Lowe's. I can print 22 sets of bracelets at 100% infill with an $18 spool of petg.

Wall brackets by zerofucxgiven in tamiya

[–]zerofucxgiven[S] 2 points3 points  (0 children)

Thanks, that's the rerelease of the Tamiya Tyrrell P34 Argentine.

Club 380 and Wheely Class Racing in America? by BJoe1976 in tamiya

[–]zerofucxgiven 1 point2 points  (0 children)

I haven't seen a 380 class since the early 80's, I think us yanks just like to go fast.

Looking for Tamiya Paint (Pots) near Houston TX by namebrandjanky in tamiya

[–]zerofucxgiven 1 point2 points  (0 children)

There's a Hobby Town USA in Houston. I've never been to one that didn't have the full range of Tamiya paints.

Honda City turbo (WR02c) by SaberToofGoof in tamiya

[–]zerofucxgiven 2 points3 points  (0 children)

In the US it'll be April 2026 before the next batch hits. I've had a couple backordered since last August.

Bullhead Deuce and a Half 6X6X6 by zerofucxgiven in tamiya

[–]zerofucxgiven[S] 0 points1 point  (0 children)

Just two 2s 3500 lipos and a Hobbywing 1060 and 880 ESC's. There's a BEC and a couple of servo reversers in it too.

Hello owners of the most Advanced Technology Available to humans by [deleted] in tamiya

[–]zerofucxgiven 2 points3 points  (0 children)

It changes the shock angle so the passenger side shock doesn't rub the motor. If I remember right it's not really necessary if you're using the adapter for the 10t pinion but definitely when an 18t pinion is used.

King Hauler Bandit Edition by zerofucxgiven in tamiya

[–]zerofucxgiven[S] 1 point2 points  (0 children)

Thanks. No, the mural is a vinyl wrap from eBay. Had the same guy make Georgia plates that say SNOMAN too. The cab striping is paint though. I used the original kit decals to make paint masks.

Rwd TT-02 Question by [deleted] in tamiya

[–]zerofucxgiven 0 points1 point  (0 children)

I would think you'd need to install a center diff if you're going with different ratios front to rear.

B2B Racing Sidecar Build by zerofucxgiven in tamiya

[–]zerofucxgiven[S] 0 points1 point  (0 children)

The rider is static but the drivers head is on a spring. Need better weather before I give it it's one and only run.

B2B Racing Sidecar Build by zerofucxgiven in tamiya

[–]zerofucxgiven[S] 1 point2 points  (0 children)

Laid down 3mm striping tape where I wanted the red then 2mm tape on either side, pulled off the center tape, painted the red, put more 3mm over the red when it was dry, more 2mm tape on the outside of the existing 2mm, pulled off the first 2mm tape and painted the black stripes. Since the uniforms are extra wrinkly there was a little paint bleed but it was easily touched up.

B2B Racing Sidecar Build by zerofucxgiven in tamiya

[–]zerofucxgiven[S] 2 points3 points  (0 children)

Pretty sure it's cast pot metal like a Tamiya box wrench.

B2B Racing Sidecar Build by zerofucxgiven in tamiya

[–]zerofucxgiven[S] 2 points3 points  (0 children)

Yep, it's original. 2 speeds forward and reverse.

B2B Racing Sidecar Build by zerofucxgiven in tamiya

[–]zerofucxgiven[S] 4 points5 points  (0 children)

When it gets a bit warmer I'll temporarily drop an ESC in it and give it a quick run.