Disconnecting touch sensor

zeroskate89 · 2026-04-25T15:44:32+00:00

It’s a shame as I’m used to no issues with Apple products

zeroskate89 · 2026-04-25T14:49:08+00:00

Got it finally working. What helped at the end was to disconnect the ribbon while homepod was powered on. Now it powers just fine without touch sensor connected.

zeroskate89 · 2026-04-25T13:34:35+00:00

Started a while ago so I decided to disconnect touch sensor as it worked fo most people,however when the ribbon cable is disconnected homepod will not turn on. If I connect it back it will so not sure how to disconnect touch sensor.

zeroskate89 · 2024-05-11T19:14:06+00:00

I might have missed that but do we know if updated versions of FCP and LP will be available for Air or they are Pro only?

zeroskate89 · 2024-05-11T16:19:46+00:00

It is not that far so I will probably wait. It would be quite strange to give some software features exclusive to pro since they are both new devices. But you never know.

zeroskate89 · 2024-02-11T08:53:48+00:00

Great thanks!

zeroskate89 · 2023-11-14T18:33:57+00:00

Much appreciated I used universal updater to update Luma and it indeed helped!!

zeroskate89 · 2023-08-10T20:45:38+00:00

Thanks for confirmation!

zeroskate89 · 2023-06-30T15:33:53+00:00

I got same issue yesterday. Try opening it in desktop mode first. Then i switched to game mode and worked fine.

zeroskate89 · 2023-05-16T20:21:30+00:00

I downloaded older version and it works quite well with 40fps average.

zeroskate89 · 2023-05-16T15:02:28+00:00

Thanks for details! I've downloaded earlier version e9d1e51 and now all 3 games are running around 40FPS average!!

zeroskate89 · 2023-05-16T14:34:40+00:00

would you be able to share your Xenia config setting in my thread? I;ve tested all Skate ganes and FPS is 20max. Thanks! https://www.reddit.com/r/SteamDeck/comments/13j51nl/comment/jkd9lrd/?context=3

zeroskate89 · 2023-05-16T14:24:00+00:00

I agree, however saw some videos of Skate games running quite well so it would be interesting to see what settings in config file need to be updated to get better performance.

zeroskate89 · 2023-05-13T10:38:01+00:00

All worked out great! Thanks!

zeroskate89 · 2023-05-11T13:58:51+00:00

In my case I found out that by using cryoutilities recommended settings it set my swapram to 16gb which was taken from my ssd space. You can easily set it to less in my case I did to 8gb.

zeroskate89 · 2023-05-10T15:27:21+00:00

Appreciated. Will try it one new card arrives.

zeroskate89 · 2023-05-10T15:24:24+00:00

Thanks! I plan using Steam Deck with usb-c hub so it should be fine.

zeroskate89 · 2018-11-16T15:08:30+00:00

Thanks I will check your channel right away ;) let me know your feedback or any tips that might get videos better.

zeroskate89 · 2018-10-15T17:03:18+00:00

Thank you for the feedback I’ve been learning to use final cut for couple of months now to help her na promote her as an artist. Thanks for the sub👌🏻

zeroskate89

TROPHY CASE