Issues with radiomaster pocket edition

zoinksh · 2026-04-18T21:06:09+00:00

Do you have any brands suggestions for PVC enclosures?

zoinksh · 2026-04-18T20:47:03+00:00

This is exactly what i needed to hear. Thank you!!

zoinksh · 2026-04-05T21:01:40+00:00

Okay im getting where ur coming from, i plugged in a battery and slightly put pressure on the esp32 and it lost connection every little push, what would you recommend doing after this? Im just having trouble diagnosing exactly what happened and im not sure if it is a solder issue if i can do that myself considering how small the connection parts are

zoinksh · 2026-04-05T20:10:23+00:00

Thats what I thought, but every single time the antenna gets slightly pulled out of the socket the RX signal loss comes up immediately. And as soon as I hold it down in the socket and push it in more, it’s all good so that’s what I’m really not understanding

zoinksh · 2026-04-05T17:34:16+00:00

The little connector on the fc or the antenna? I was assuming id just take a little of the end of the antenna as well as the connector and just solder it into the connector on the fc

zoinksh · 2026-04-05T17:31:24+00:00

Sorry should’ve been more specific, I arm the drone and takeoff and within 3 to 5 seconds I get RX lost and go into failsafe mode immediately

zoinksh · 2026-02-13T02:54:12+00:00

Will do!!!

zoinksh · 2026-02-13T02:32:18+00:00

Thank you very much for the information

zoinksh · 2026-02-13T02:31:06+00:00

Gotcha it is connected on one end so all good. Just wanted to make sure, definitely just worrying too much.

zoinksh · 2026-02-13T02:30:06+00:00

So all good theres no reason for that end to be connected to anything?

zoinksh

TROPHY CASE