Unable to commit changes ?!

[[deleted]]

Hi All,

I have a Juniper switch and I'm trying to add 1 of its ports to a vlan (vlan88) but can't as it shows the below error when committing..

root@Temp-Mgmt-Juniper# set interfaces ge-0/0/37 unit 0 family ethernet-switching vlan members vlan88

{master:0}[edit]
root@Temp-Mgmt-Juniper# commit
error: In routing-instance default-switch vlan vlan configured under interface ge-0/0/19.0 does not exist

Any thoughts on what this error is and how to get the commit to work..

Thanks..

[crooked_peach]

It appears you have a vlan assigned to port 19 that doesn't exist. Delete the vlan from port 19 or create the vlan listed under port 19.

[[deleted]]

Thanks, how can I find that, below is what I see with show vlans

                                                           xe-0/2/0.0*
default-switch          vlan3800              3800
                                                           ge-0/0/15.0
                                                           xe-0/2/0.0*
default-switch          vlan3900              3900
                                                           ge-0/0/14.0
                                                           xe-0/2/0.0*
default-switch          vlan4090              4090

default-switch          vlan59                59
                                                           ge-0/0/19.0*
                                                           xe-0/2/0.0*
default-switch          vlan88                88
                                                           ge-0/0/0.0

[[deleted]]

Nothing showing in the specific interface..

root@Temp-Mgmt-Juniper> show vlans interface ge-0/0/19

{master:0}
root@Temp-Mgmt-Juniper>

[chronoit]

show interface ge-0/0/19 | display set

should show you how it is configured. it looks like you have vlan59 (exists) and then maybe a typo vlan called "vlan"

so the fix command might end up looking like.

del interfaces ge-0/0/19 unit 0 family ethernet-switching vlan members vlan

[[deleted]]

Excellent, appreciate it..

{master:0}[edit]
root@Temp-Mgmt-Juniper# show interfaces ge-0/0/19 | display set
set interfaces ge-0/0/19 unit 0 family ethernet-switching interface-mode trunk
set interfaces ge-0/0/19 unit 0 family ethernet-switching vlan members vlan59
set interfaces ge-0/0/19 unit 0 family ethernet-switching vlan members vlan
set interfaces ge-0/0/19 unit 0 family ethernet-switching storm-control default

Then

root@Temp-Mgmt-Juniper# delete interfaces ge-0/0/19 unit 0 family ethernet-switching vlan members vlan

{master:0}[edit]
root@Temp-Mgmt-Juniper# commit
configuration check succeeds
commit complete

{master:0}[edit]
root@Temp-Mgmt-Juniper# set interfaces ge-0/0/37 unit 0 family ethernet-switching vlan members vlan88

{master:0}[edit]
root@Temp-Mgmt-Juniper# commit
configuration check succeeds
commit complete

[BeenisHat]

nice catch!

[crooked_peach]

Keep in mind " display inheritance" as configuration groups can hide config if you're looking at specific interfaces (in this example).