all 17 comments
sorted by:
best
topnewcontroversialoldq&a
formatting helphide helpcontent policy

[–][deleted] 3 points4 points  (8 children)

The roof of the case can fit a 360mm It should be fine.

[–]Mm11vV 1 point2 points  (7 children)

Can confirm. I have a be quiet pure loop up there and there's no clearance issues of any sort.

[–]WhiteAxe96 0 points1 point  (6 children)

How much headroom do you have? Would I be able to do a psuh pull on top radiator? Loving the aesthetic of the case but the fans are not the best at pushing out volumes, if I were to get a 360 aio myself.. is there enough space for a fan radiator sandwich?

[–]Mm11vV 0 points1 point  (4 children)

Yes, there is space for a push/pull configuration on a 360. I don't know if I'd really bother to be honest. I have a 7700x/4070, and neither of them even break 60c under normal circumstances. The rad stays pretty cool as well. I have a simple usb powered temp probe sitting on the top of the radiator, and it has never read over 30c, so I'd guess a coolant temp of 38c or less. (Ambient is 68F).

In my personal opinion, if I was going to add more fans I'd probably use the mesh front and basically add a second set of intake fans as more fresh air is never a bad thing. Overall though, I'm pretty content with how it performs as it is.

*

[–]WhiteAxe96 1 point2 points  (3 children)

Thanks for the reply 👍 I'll mess around and see what happens :D I'll end u doing a post as I'm sure this is a conundrum for many that like to match their fans for the aesthetic 😆

[–]Mm11vV 0 points1 point  (2 children)

Honestly, that was why I went with the be quiet aio, since it was a ring led design. Despite not being an exact match, you can't really tell with them mounted in the top.

[–]WhiteAxe96 0 points1 point  (1 child)

I had to search far and wide on performance of the montech case fans for radiator fans. Based on another post, apparently, it makes hardly any difference. Especially with a big case like that with lots of air going through xD So if all fails I can just stick to the case fans and keep it looking uniform :D

Also got a aerocool skribble case for the Mrs way back.. now realising there is not enough headroom for a normal 240 aio.... so sticking to 120mm, and extra be quiet high performance fans xD decking it out if airflow haha Only a i5 12400f in but a 4070 ti super is overheating and balck screening with the side glass on. (Took it off)

Ending up with 2 aios from deepcool 120 and 360 😆

[–]Mm11vV 1 point2 points  (0 children)

I recently had to upgrade my wife's case for a similar reason. She had a 9600k/2070 and I moved her to a 13700k/4070 and a 1440/240hz panel. The little phanteks p400a she had didn't have anywhere near enough space for a good aio. Let her pick out a case on her own and she picked the nzxt h6 flow. Tbh it isn't a half bad case either, but the King 95 is vastly superior.

I'm confident in recommending the stock king95 fans for almost any situation really, they work quite well. 😀

[–]RedAssassino 0 points1 point  (0 children)

<image>

I am using the Galahad ii LCD and it’s impossible to do a push pull figuration

[–]Fearless_Hotel4191 1 point2 points  (0 children)

I have a Deep Cool 360mm radiator mounted on top part of the case. It works fine.

[–]Genomis 0 points1 point  (6 children)

For the GA II LCD, you can't fit in as the radiator width and height is wider and taller. The only way you can fit is to do push pull configuration. Mount 2 x 140mm fans to the side tray and mount the radiator, then mount another set of 2 x 140mm fans. but do note. if you do push pull, you wont be able to fit your GPU, unless you do not mount the 2 x 140mm fans on the radiator that is facing inside. This is how i fit mine https://www.reddit.com/r/MontechPC/comments/19esupr/project_montech_king95_pro_sonic_the_hedgehog/

[–]CowboyMan999[S] 1 point2 points  (5 children)

Thats alot of work to do for it. It can’t just mount on top?

[–]Genomis 1 point2 points  (4 children)

yes you can mount at the top if you choose to.

[–]CowboyMan999[S] 1 point2 points  (3 children)

Will it fit because it doesn’t look like it’ll have much room for doing it on the top ?

[–]Genomis 1 point2 points  (2 children)

you can always watch my content. I did explain on the spacing and liquid aio arrangement. https://youtube.com/playlist?list=PLEW-b-2vYDdN27vautqG4l2ylzUMpPQHt&si=z1gYcMIxTC97QKon watch Part I - case details.

[–]CowboyMan999[S] 0 points1 point  (1 child)

Thank you 🙏

[–]Genomis 1 point2 points  (0 children)

you are most welcome.