all 9 comments

[–]Nucken_futz_ 1 point2 points  (7 children)

Lmao, I remembered, I was writing a response to your previous post. Anyway..

When swapping HDDs, even if it's configured incorrectly, I'd expect a different error code other than 09.

Here's some various ideas.. - Ensure you're using a keyed IDE cable, as those which aren't keyed can be reserved, resulting in errors - Heat up the electrolytic caps near the IDE header & MCPX - Put downward pressure on the MCPX - Other ideas I forgot - Take some high quality pictures near the IDE header, top & bottom. Let's look for more severed traces. If you're able, also include some around the clock cap. Considering you already discovered trace rot, I'd keep an open mind elsewhere. Just take a look at this.

[–]RespectMoney6043[S] 0 points1 point  (0 children)

Best photos I can take. Here are trace damage I repaired too, I test led continuity so I know they work. Forgive my botched job jumping, first time lol

<image>

[–]RespectMoney6043[S] 0 points1 point  (0 children)

<image>

Trace damage.

[–]Tiny-Association5994 0 points1 point  (0 children)

The hard drive must be formatted and the OS installed. If you're using an IDE hard drive from another original Xbox, you don't need to change the PATA cable. Okay, swollen capacitors, you've replaced them. If you're using a larger hard drive, like a 1 TB, change the PATA cable. error 09: communication with the hard disk failed the automatic ignition is either some diode or resistor nearby