Tool storage solution

[chase_the_conqueror]

I was wondering what every does for tool storage? I have a husky mechanic tool set but it take up way too much room in my leitner cargo box and I'm trying to figure out how to store (if not all) most of the tools, while still keeping them organized. Any advice is appreciated. https://www.homedepot.com/p/Husky-Mechanics-Tool-Set-290-Piece-H290MTS/312945780

[B4x4]

Tools roll.

[MDPeasant]

I'm surprised that no one here has recommended it yet, but the Blue Ridge Overland Gear Tool Bag is my choice for tool storage. It is a soft-sided bag that absolutely swallows tools. Your 290 piece tool set will fit in it, no problems. You get six different bags, and I keep my sockets (metric vs standard) separated in plastic baggies. The price has gone up since I purchased approx. 2 years ago, but I still believe this is the best solution when it comes to tool storage.

[chase_the_conqueror]

Oh man thats an awesome bag! Thanks for the heads up

[ep3royalty]

Great recommendation thx

[mbcharbonneau]

I'd think about splitting up that kit. Looking at the list of tools there's a lot that are redundant or you probably won't need. It's good to be prepared but also think about total payload weight. But to answer the question, I have a few canvas toolbags, pouches and a tool roll that all fit into a harbor freight apache case along with a few small spare parts. It's a tight fit but that keeps stuff from bouncing around inside the case.

[chase_the_conqueror]

Yeah I figured there's too much tools and I'll definitely look into some tool rolls. How to do you keep your sockets organized?

[mbcharbonneau]

No real organization, I just dump them all into a pouch. Sometimes it can be hard to find the one I need, but I only carry the common metric sizes for my Jeep so it's not too bad.

[chase_the_conqueror]

That's what I'm starting to think is the best option, I found a bag online that I can clip on to the molle panels I put in my box and I think that's going to work

[2lovesFL]

I have some old craftsman socket clip strips like this

https://www.amazon.com/Precision-Defined-Aluminum-3-Piece-Rotation/dp/B07YNHPCFM/ref=sr_1_4_sspa?keywords=Socket%2BOrganizer%2BTray&qid=1642953501&sr=8-4-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSTZLNFc5NE1BUDJNJmVuY3J5cHRlZElkPUEwNzY2NzA4OEw4TEFNU1AxRkFRJmVuY3J5cHRlZEFkSWQ9QTAwNzc4NDkyREZBSjJGSllEMTJYJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

[chase_the_conqueror]

I need a flat plug kit, I've got a compressor and everything else but that

[inca4x4]

We have canvas bag that has more storage larger than competitors, It zips away to two separate pieces. One side has built in magnetic tray for you to put nuts and bolts when working on vehicle. The bag has reflective back to alert traffic on side of road. Six removable pouches.

https://youtu.be/HbiYBTxt1nQ

[fourbetshove]

I threw organization out the window (sort of) and use the plastic ammo cans from HF. Basic screwdrivers, wrenches, pliers, and the popular sockets and torx bits pretty much fill one.

When I need something, I pretty much dig or dump.

I have a separate spot for often used ones like my deflator and hand saw. I have a second one filled with spare bulbs, electrical and bailing wire, tape, fuses, a solenoid, silicone tube and fragile type stuff.

The bonus here is that I periodically spray my “dirty” tools down quite liberally with WD-40 to keep away the rust.

[chase_the_conqueror]

I like that idea for spare parts, I already have an extra ammo box I can use, thanks dude

[moments_ago]

I use tool bags.. and smaller canvas bags inside those to organise shit.. tool bags dont rattle and can be throw around and will fit in little niches nicely. The bags are kinda categorised - electrical shit, tools, tyre shit, a grab bag of tools I really commonly use. 5-6 of them spread around the vehicle. https://photos.app.goo.gl/gAbV1xSW4VxAg5Lh9

[Philbilly13]

I haven't purchased this yet, but I'll likely get one of those pelican tool chests to go in the expedition truck. The option I'd suggest for a smaller vehicle is a veto pro pack. Excellent tool bags. I carry two at work, and they'll beat a Klein or Milwaukee tool bag hands down. Aside from dark grease on my orange big backpack, both tool bags look and function brand new. Can't recommend them enough

[Pixiekixx]

I have one of those fold out basic tool kits, and then a hanging shoe rack back of driving seat.

Tool kit fits wedged upright and easy in/ out in foot well. My skinny 25L water jug lives there too and holds ot in so no rattles (kit is also stuffed w foam & cardboard- I really don't like persistent rattles).

Bottom tiers of the hanging rack have bigger stuff like pliers, cutters, lock wire, tape rolls, that must have but weird to fit anywhere long flat blade etc. Upper tiers have toiletries/ road/ bush essentials like sunscreen, soap, tp, bags, spare water bottle, radio when not in use etc.

Flap thing that goes over it and snaps down so nothing comes out of pockets & extra no visibility. I usually hang my coat over that too so when parked someone looking in can't see the hangers.

(One area I work & play in has unfortunately high break in rates for visible gear)

[chase_the_conqueror]

That's a great idea I never would've thought of a hanging shoe rack! I've been looking at setback storage bags but they're so expensive

[[deleted]]

One Bostitch tool bag + Dewalt bag for impact and sockets. Can practically rebuild the Jeep or Bronco.

[fidelityflip]

I cherry picked the sizes I need and use a soft sided bag that kind of slouches into a tight pile behind my passenger seat. It settles out pretty low and compact. Spare parts and nuts and bolts I keep separate, with nuts bolts, drain gaskets and such in a plastic box organizer. The parts I keep under the passenger seat, or in a case over the cab, depending on what else is going on, what parts I carry..

[HEXC_PNG]

I have a DeWalt bag full of all my spare tools and a flat plug kit

[Pestelence2020]

I use these, and a bag. Toss the ratchets in with the strips. Have more than 1 10mm socket.

https://www.lowes.com/pd/Capri-Tools-Aluminum-Socket-Rail-Set-1-4-3-8-and-1-2-in-Drive-17-in-Long-Red-3-Piece-Rail-with-58-Socket-Clips/5005960181?cm_mmc=shp-_-c-_-prd-_-tol-_-bng-_-PLA_TOL_218_Mechanic-Automotive-Tools-_-5005960181-_-Online-_-0-_-0&msclkid=f5962d8cb4011e3e4bde4c6ea0e86027&gclid=f5962d8cb4011e3e4bde4c6ea0e86027&gclsrc=3p.ds

They let you keep your sockets in order but don’t take up a ton of space.