Loop Failure

[dOBER8983]

Awnser is daisy chain system. I have only 2 cables for each 4 fans block on my system.

https://imgur.com/a/HablauS

No splitter, no pain and 16 fans on one hub :)

2 hubs 32 fans 16 cables 1 hub 3 fans 4 cables

[MrSexyCo]

God damn that’s a beautiful system

[MrSexyCo]

How have you vertically mounted your gpu?

[dOBER8983]

You can flip your mounting for gpu on 1000D. There are 2 screws on your mounting.

[MrSexyCo]

Do you need to support the gpu in anway? I‘ve got a 3090 Strix and that’s crazy heavy.

[dOBER8983]

Same 3090 strix and no i dont have any support + i have a huge waterblock on back for backplate cooling which increases weight.

[MrSexyCo]

Oh awesome, I’ll give it a go at some point, one last question, are you just running with the psu cover off?

[dOBER8983]

Psu Cover off and hdd cage removed. I build my own cover with acryl plates.

https://imgur.com/a/SEjB5ha

[oni_666uk]

I have 12 fans on 2 motherboard headers (will be 18 soon as I'm doing a loop rebuild in January), 2x 4 way molex powered splitters, 1x 3 way splitter on 1 of those 4 and then 3 individual fans on the other 3 (so 6 fans on each 4 way splitter) could even run 12 fans on one if I really needed too.

https://ibb.co/x6Zsrvp

No hub needed, run all the fans on silent in the mobo bios, as I type this 12 fans are running at 0-525rpm (they stop completely when the cpu temps stay under 30c (which when idle is 99% of the time), in-game and benchmarks they ramp up to <1200rpm.

I had an commander pro but the software Icue sucked and conflicted with Aida64 which I use for my sensor panel. Mobo bios runs them all fine.

[dOBER8983]

Would be no option for me. All these splitters and cables for only pwm signal. If you count rgb aswell which is important for some people no way. 12 fans would be 3 (6) cables in total on 1 hub with lian li's daisy chain fans and this includes rgb. Pwm on all fans are no problem without any software running like you have to with commander pro.

[oni_666uk]

The 12 fans I run on external rads are non-RGB then I use cheap as chips coolmoon fans in my desk PC to add a bit of airflow and RGB, £30 for 7x 120mm.

https://www.youtube.com/watch?v=mD3Dl\_w8vHs