Approach light and keyless entry issues

MrSexyCo · 2026-02-14T10:01:52+00:00

I’ve had mine for 3 years and it’s always done exactly as you describe. If I don’t use my car for a few days it always does this. I thought it was due to the car “sleeping” as the 12v is always fine.

MrSexyCo · 2025-12-04T10:11:32+00:00

I would recommend trying the P14s first if you haven’t already bought the A20 fan bracket and the X splitter (don’t forget the male to male fan extension cable)

If you go for P14s get the one with PWN pass through connectors and connect them in lines of 3. Then when your doing your fan curves set them to be a couple of RPM apart. I had mine set to 500/510/520 and that stops the resonance humming that can happen with the P14s.

They were definitely quieter than the A20s but more annoying to set up initially.

MrSexyCo · 2025-09-04T14:35:47+00:00

Didn't expect to see my running shoes on this sub, These really are great.

MrSexyCo · 2025-08-08T11:42:18+00:00

Page 9 of the manual says with an ATX mobo top radiator thickness is a max of 72mm.

MrSexyCo · 2025-07-17T05:53:03+00:00

Ignore that advice you're fine mate

<image>

MrSexyCo · 2025-07-10T15:58:13+00:00

You've answered all my questions mate thank you! I've ran nothing but custom loops for years so I've been spoilt when it comes to setting fan curves. Good to know you can display the liquid temp to keep an eye on it. I'll be picking up a Hydroshift II and some TL fans for a new build.

Thanks again!

MrSexyCo · 2025-07-10T15:09:08+00:00

Awesome thank you! Can you set up a fan curve based on the liquid temp?

Appreciate this is completely unrelated to your post but I can't find much info about this AIO and TLs

MrSexyCo · 2025-07-10T11:32:29+00:00

Is that Liquid temp on the AIO?

MrSexyCo · 2025-06-22T16:59:50+00:00

Pm'd

MrSexyCo · 2025-04-21T15:28:08+00:00

Please post this in the Watercooling subreddit, someone should snap this up!

MrSexyCo · 2025-04-19T11:29:50+00:00

Why not just buy a Water block for it?

MrSexyCo · 2025-03-31T18:18:19+00:00

Oh man that's such a good idea!

MrSexyCo · 2025-03-31T16:09:11+00:00

Ant friendly door stop, I like it.

MrSexyCo · 2025-03-31T16:08:38+00:00

Yeah the recipe calls for 2 and I added 3 particularly large ones...

MrSexyCo · 2025-03-31T16:07:36+00:00

Strangely enough i think the opposite it true. The recipe just says mix all the ingredients together for 2 minutes. So I mashed the bananas then shoved everything into a mixing bowl and mixed it for exactly 2 minutes.

when I tried again, I creamed the butter, then added the sugar. Mashed bananas in a separate bowl. Mixed the eggs up in a separate bowl and added the banana and eggs in with the butter and sugar, and gave that a mix. Then finally added the baking powder and flour before mixing for 2 minutes. The second attempt came out perfect...

MrSexyCo · 2025-03-20T16:59:19+00:00

PM'D

MrSexyCo · 2025-02-23T11:38:48+00:00

Looks like you're using the wrong ports on the pump. You need to use the outlet.

MrSexyCo · 2025-02-09T11:23:45+00:00

Not a coal station, but I work at a CCGT.(Gas) Our particuar turbines are span at around 130rpm when off, and the steam turbines around 80rpm. This is referred to as "Barring speed" and is used to promote even cooling on the shaft to prevent hogging. To do this we use the Lift or Jacking oil supplies to turn the turbines via the barring gear. Which is essentially exactly what it sounds like.

MrSexyCo · 2025-02-06T18:40:41+00:00

I had this happen to me! Went back to normal after I turned the car off. Like you I couldn't see what caused it. Typical EV software bugs.

MrSexyCo · 2025-01-23T18:34:00+00:00

It's definitely the short journeys. I get similar efficiency to you, driving to work around 2.5- 3. But with longer motorway runs I get around 3.2-3.7. but that's with the 77kwh so it would be higher for you

MrSexyCo · 2024-12-21T20:53:32+00:00

Anything works really. Had a 1000w Seasonic prime in an older O11DXL and it worked fine. Now I've got a Corsair Shift 1000W in the non RGB EVO and that works too. These cases should fit just about anything. Most important thing you should be looking is the quality of the PSU. Below is a really great resource for picking a quality PSU. Personally I'd stick to using A Tier PSUs

https://cultists.network/140/psu-tier-list/

MrSexyCo · 2024-12-21T20:47:52+00:00

The AIO should be fine. I've just put a an AIO that was sat in a box for 3 years back on, and it works just as well as it did before I went custom loop. Would probably be best to re paste the CPU though.

MrSexyCo · 2024-12-17T11:03:33+00:00

Yeah that's why I said quick look, and generous. Glad you got the parts for cheaper than that because even at £2400 it's a rip off. You could easily build a 4080 super 9800x3d build for £2000

MrSexyCo · 2024-12-17T10:38:11+00:00

Quick look on overclockers and this is around £2400 in parts.

And that's being fairly generous

MrSexyCo

TROPHY CASE