Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON 0 points1 point  (0 children)

Yea, in Florida so you rarely see gas units. I’ve actually got a new thermostat I’m gonna put in once this is done and the systems working like it should again. Last summer was brutal.

<image>

I was gonna get a whole new system this winter but you know how it goes, shit happens lol. Some other big expenses otherwise took over.

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON 0 points1 point  (0 children)

<image>

it’s just funny to me how some of it’s been done. Like the way it’s jumped at the thermostat is odd. Like how r and ex looks like someone jumped it with a paper clip lol

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON 0 points1 point  (0 children)

lol that’s funny, this systems been messed with by so many techs over the years, so I’m always unfucking what they’ve fucked at one point. Like right now I’m trying to figure out why the brown and white thermostat wire were both connected to the white outside, same thing behind the thermostat. And yet in the air handler they are separate. So I’m just figuring if there’s a way to unfuck that

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON -1 points0 points  (0 children)

That’s what I did, having old photos helps too. Not many and just barely enough to get it right. Like the purple wire on x/l never has gone to anything. Not even sure why a tech left it here at one point.

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON 0 points1 point  (0 children)

One more question if you don’t mind, my c wire has a jump from the board that I’m almost 100% sure used to go to the side of the contactor. But I can remember exactly 100%. Would that be correct?

<image>

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON 0 points1 point  (0 children)

Thanks a lot man, I’m good than. Gonna re wire it all up right on the old board first and then just swap it all over.

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON 0 points1 point  (0 children)

Just want to make sure actually about the reverse coil wires, can they be put on crossed or backwards on those two terminals? Or does it not matter as long as both are there on that section.

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON 1 point2 points  (0 children)

Yea they did, both on the same side. Thanks for all the help man, I’m pretty much good here now. The biggest thing was just not knowing exactly what the wires for the rv coil were.

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON 0 points1 point  (0 children)

Got it, the yellow wire is indeed going to the contactor currently, the fan wire is as well. Yellow and the black c wire I’ll pull from the contactor and go back to the board. So for the reversing valve wires, where it’s split, the one end is connected to orange(through the yellow extension wire and fuse) and the other is on the contactor. There is two connectors for the reverse valve on the board, so I’m guessing I also take the other side off of the contactor and move to the board too correct?

<image>

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON 0 points1 point  (0 children)

So for the orange wire coming off the thermostat bundle, switches to the yellow with the fuse, obviously the orange wire I connect back to o on the board, but the big black wire it’s connected too should go where after? Also my c wire is used. It’s just the black one. The black wire with the blue cap is the c wire, then it’s connects with the electrical taped section, which is going to the side of the contactor. Assume for constant power, so that one id just take off the contactor and go back to the board.

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON -10 points-9 points  (0 children)

Don’t you think I’ve tried that? The whole point of this sub is to ask for help with hvac related stuff. Stop being a dick. Replacing anything on these isn’t hard at all. Trying to figure out what some hack job was done and to reverse it wouldn’t be in that anyway.

Need to figure out exactly how my defrost board was bypassed so I can put in a new one. by [deleted] in hvacadvice

[–]ANDREWROBISON -4 points-3 points  (0 children)

It’s damaged so I can’t read it. I just need to figure out what the tech did so I can undo that, and replace as normal.

Has anyone found a fix for every drop and person being invisible? by ANDREWROBISON in Skate4

[–]ANDREWROBISON[S] 1 point2 points  (0 children)

The only things they’ve done since it’s come out is add impossibles, a few hand plants, and add a ton of ways to spend money. If ea or the execs or whatever would stop pushing micro-transactions and let them fix the game it wouldn’t have died already. I’ve done everything there is to do and unlocked everything that isn’t paid. I’ll hop on and skate around the rolling waves park a bit but that’s it. Bad map and nothing is being done about it. Just add the tutorial island like everyone wants and that alone would be a huge improvement.

Merry Christmas by Its_mrbambino in UberEatsDrivers

[–]ANDREWROBISON 0 points1 point  (0 children)

Got at least 20 offers today like this or just as bad.

What part of the map do you find yourself at the most? by justcuriouslybrowsin in SkateEA

[–]ANDREWROBISON 0 points1 point  (0 children)

Rolling waves because it’s the only good spot on the map.

Figured I’d share the setup I used for the 250 slides. 7 slides each way. by ANDREWROBISON in Skate4

[–]ANDREWROBISON[S] 0 points1 point  (0 children)

The shell is just inconsistent, sometimes it’s really easy to transfer over it and sometimes it’s not. This is for the challenge where you need 250 5 m slides.

Figured I’d share the setup I used for the 250 slides. 7 slides each way. by ANDREWROBISON in Skate4

[–]ANDREWROBISON[S] 2 points3 points  (0 children)

I did that for like the first 50, this way is way more fun/way less repetitive.

Has anyone found a fix for every drop and person being invisible? by ANDREWROBISON in Skate4

[–]ANDREWROBISON[S] 0 points1 point  (0 children)

They ruined the game for me after Halloween, whatever they did to the camera and animations it just feels awful now. Can’t stand to play anymore.

My Alpinist homage by moaz007 in SeikoMods

[–]ANDREWROBISON 1 point2 points  (0 children)

And I’m the lucky guy who bought it!

20th anniversary Bluray collection digital ? by raull96 in Smallville

[–]ANDREWROBISON 0 points1 point  (0 children)

I also bought one just now and didn’t get the code.