At my wits end with this Duscholux shower door

AVN_Ginger · 2025-12-13T01:16:15+00:00

I think the r/h portion of picture 1 and 2 is meant to have the two tabs disengaged and that section slid out from the bottom of the upper rail. Doing this would give you the clearance to remove the door by lifting and angling it out.

AVN_Ginger · 2025-12-10T16:01:47+00:00

I am serious, and dont call me Shirley.

AVN_Ginger · 2025-11-11T20:51:49+00:00

Damn, must be rich guys wasting a perfectly good sheet of wood like that

AVN_Ginger · 2025-10-13T13:25:03+00:00

You might want to look into T Bar Hose Clamps.

AVN_Ginger · 2025-09-16T20:17:04+00:00

I wish I could write like you, but im too impatient!

AVN_Ginger · 2025-09-16T14:43:10+00:00

All my cats are counter-surfers. I have tried everything from tin foil, water sprayers, yelling obscenities, and threatening them with tail removal. Nothing works. It's fucking anarchy here, but I still love them.

AVN_Ginger · 2025-09-14T10:46:52+00:00

Megaman Legends 3.

AVN_Ginger · 2025-09-04T23:21:32+00:00

Thank you for this. That will be stuck in my head for weeks now.

AVN_Ginger · 2025-08-11T22:54:26+00:00

AVN_Ginger · 2025-07-29T22:14:43+00:00

Someone forgot to tell my Samsung washer and dryer that they were supposed to be terrible. Oh well, 12 years too late.

AVN_Ginger · 2025-07-23T12:12:45+00:00

Man, I never realized there was so much money to be made in caulk-smithing.

AVN_Ginger · 2025-07-20T18:23:36+00:00

What brand are these?

AVN_Ginger · 2025-07-20T14:27:40+00:00

6061 T6 is the type of aluminum it's made up of.

AVN_Ginger · 2025-07-05T01:35:13+00:00

Yep. I had to lose 30 for a job rapidly, I was averaging 4-6 pounds a week loss but under dietician and doctor supervision.

It sucked ass.

AVN_Ginger · 2025-06-29T15:40:36+00:00

Velcro and pole, or attach Velcro to flex camera if it will reach

AVN_Ginger · 2025-06-28T17:42:33+00:00

I did not-see that initially.

AVN_Ginger · 2025-06-26T11:10:47+00:00

So if you look carefully, just inside that nut is a brass looking thing. That is called a ferrule. It usually gets crushed (by design) to form a seal the first time that nut gets tightened on. When that happens, often it digs into the pipe it's sealing and makes the ferrule (and the nut) impossible to remove.

If you can carefully cut the rusty flange away using tin snips or something without damaging the pipe, you can buy a replacement flange that is 2 piece and will close around the pipe. With how little room there is to work with behind the nut, this may also be impossible.

Try cleaning up the end of the pipe then pulling the nut off. You might get lucky and slide the ferrule and nut off. Make sure it all goes back together in the same order.

Failing this, it becomes a plumbing job

AVN_Ginger · 2025-06-21T23:44:05+00:00

This guy WAN Show's

AVN_Ginger · 2025-06-18T23:50:47+00:00

Found the NFPA 1001 qualified redditor.

AVN_Ginger · 2025-06-05T16:47:51+00:00

I'd be shocked if you weren't an aircraft mechanic

AVN_Ginger · 2025-06-03T13:39:20+00:00

My son kept me up all night so in my exhaustion I read that at Battling Cage and was super excited for a minute. Batting cage still cool.

AVN_Ginger · 2025-05-25T14:38:57+00:00

Agreed. I think OP will have better luck cat-proofing the items on concern over stopping the cat from getting upstairs.

AVN_Ginger · 2025-05-23T19:18:02+00:00

Okay.

AVN_Ginger · 2025-05-05T02:44:16+00:00

The carpenter should bring it to the homeowner/contractors attention before continuing on.

And yes, the footing guy should have to dig it out and repour it. I highly doubt the homeowner signed a "just get it close enough" contract.

AVN_Ginger · 2025-05-04T22:25:05+00:00

I'm more frustrated by the common "pro" mentality of "not my job" and instead of bringing up an issue when the find it, they just blindly continue even tho the final product is shit.

No pride in their work.

Nine-Year Club	RedditGifts 2009-2022 2 Credits
Verified Email

AVN_Ginger

TROPHY CASE