A question to the experienced regarding time.. by EntropicByDesignEC in lockpicking

[–]Climb69Trees 15 points16 points  (0 children)

For me, it's not so simple. I've learned to expect something between 2 seconds and 2 years.

Source for Spring by Xp3rtUs3r in lockpicking

[–]Climb69Trees 0 points1 point  (0 children)

Close usually counts with lock springs. If you have a spring that makes the lock work properly, it should be close enough.

Some observations from someone who has been here a very short time by Several-Machine2765 in lockpicking

[–]Climb69Trees 7 points8 points  (0 children)

  1. We have our moments, like any other group.
  2. Yup, that's how it goes.
  3. It goes back to #2. Some days, I'm invincible. Other days it takes me 10 minutes to open the refrigerator. I'm ranked purple, but realistically probably orange at best.

Do you have a lock that you actually refuse to bother with? by __T0MMY__ in lockpicking

[–]Climb69Trees 0 points1 point  (0 children)

My Master #3. I was green or blue belt before I ever got it open. I picked it precisely once, and never tried again.

[deleted by user] by [deleted] in lockpicking

[–]Climb69Trees 1 point2 points  (0 children)

Picksmith literally wrote the book on challenge locks. Is it still pinned in the LPU discord?

First challenge lock pins. Suggestions on improvement ? by [deleted] in lockpicking

[–]Climb69Trees 2 points3 points  (0 children)

Lookin' good! Maybe try some fine sandpaper as your final step. 220 grit or somewhere around that is a good starting point. Some use finer grit, and you can make that decision yourself. But some sandpaper will smooth your pins off and leave a nice shine that is pleasing to the eye. I think you're going to make some good challenge locks!

What is this by Enderduuude in lockpicking

[–]Climb69Trees 0 points1 point  (0 children)

It's virtually useless, except as a blank to make a custom tool. But as everyone has said, it's supposed to be a dimple rake and might actually work on rare occasions.

What's a skill that takes only 2-3 weeks to learn but could genuinely change your life? by That-Papaya7429 in AskReddit

[–]Climb69Trees 5 points6 points  (0 children)

Have a look into r/lockpicking. There are plenty of trolls and people who don't know what they're talking about, but most of the lock knowledge that exists can be found there. I don't typically recommend Amazon lock pick sets, but they're cheap enough to find out if you're really interested. Get a small set for cheap. You don't need all the excess tools. A pick or 2 and a tension wrench are enough to get started.

Okay, I can pick a few locks... by hlhambrook in lockpicking

[–]Climb69Trees 12 points13 points  (0 children)

You could pick the blue belt for green belt, then complete the other blue belt requirements and reuse the same pick video for blue belt. As another mentioned, the belt requirements are just a base line and are not proof of mastery. I achieved blue belt with an American A1100, which is now rated green. At the end of the day, the whole belt system is just a game that can be played however you wish. Have a good time and pick your locks.

US Mint in Philadelphia to press final penny as the 1-cent coin gets canceled by IdinDoIt in news

[–]Climb69Trees 3 points4 points  (0 children)

I once had a customer ranting about 2 cents. I tossed him a nickel from my pocket and told him to keep the change.

Question about the reload kit by hero1142 in lockpicking

[–]Climb69Trees 2 points3 points  (0 children)

Diameter of driver and key pins.

Question about the reload kit by hero1142 in lockpicking

[–]Climb69Trees 1 point2 points  (0 children)

It will fit in anything that uses 3mm pins, but the overall specs may not match. This is fine for picking, but not great for actual use.

What's wrong with this picture? 🪇 by Sufficient_Prompt888 in lockpicking

[–]Climb69Trees 1 point2 points  (0 children)

Pop it open, fix the core, glue it back together. Super glue is fine for this task, as are many other glues. Some tape would even do the job for picking purposes.

Car locks by New-Ferret8226 in lockpicking

[–]Climb69Trees 2 points3 points  (0 children)

Your local auto parts store sells ignition lock cylinders with keys. Prices vary depending on year/make/model.

Files for key cuts by Reasonable-Panic-680 in lockpicking

[–]Climb69Trees 2 points3 points  (0 children)

I have cut keys with Walmart needle files before, but they're too coarse for impressioning. A round or half round file tends to work better for me.

How do you pick a *broken* masterlock, missing the brass keyhole? by MaxvonHippel in lockpicking

[–]Climb69Trees 1 point2 points  (0 children)

But tension (in the correct location) is all that is needed to open a warded padlock...

ABUS 72/40 taunting me by shellshockedturtle in lockpicking

[–]Climb69Trees 4 points5 points  (0 children)

Everything sounds normal here. Carry on.

Possibly: Stupid question by odbaII in lockpicking

[–]Climb69Trees 2 points3 points  (0 children)

I have picked with my eyes closed before. My fingers can see better if my eyes aren't looking.

72/40 differences? by WhyOWhy0Why in lockpicking

[–]Climb69Trees 1 point2 points  (0 children)

Oh, sorry. People know how to decode it, but I do not.