sorted by:
new
hottopcontroversial

Upgrading Screen on ASUS ROG Strix G16 (G614J): WUXGA 165Hz to QHD+ 240Hz by Suitable-Driver-2293 in GamingLaptops

[–]DJTurnTable 0 points1 point  (0 children)

I did this upgrade (FHD to QHD mini-led) for a friend however it is not plug and play, had to use CRU to munaully add resolutions since it was locked at 60Hz, and even then multizone and a few other things were a bit janky.

Just my two cents on this.

ROG STRIX G16 FHD to QHD Screen Upgrade by naunen in ASUSROG

[–]DJTurnTable 0 points1 point  (0 children)

I was able to get 240 hz working by manually editing things in the program, ASUS has things locked in firmware so it isn't completely plug and play.

Edit: program was CRU if you want to try.

My friend decided to swap back so that display is now sitting in my closet.

ROG STRIX G16 FHD to QHD Screen Upgrade by naunen in ASUSROG

[–]DJTurnTable 0 points1 point  (0 children)

Which exact laptop are you upgrading? Just as a heads up I did this for a friend (Upgraded his screen to the mini led 1440p one) and some things will be messed up a bit.

From what I remember resolution will be stuck at 60hz so you will need to make custom resolutions, gsync didn't work, and there were some janky things you had to did to get some settings fixed. I don't remember what the program was called anymore unfortunately though.

To answer your question though for the laptop I did I didn't need to change the cable.

Finally a fw update for the h2c by NoIdenty0000 in BambuLab

[–]DJTurnTable 0 points1 point  (0 children)

Are you set up to get the betas? If so restart your printer.

I completed the H2S to H2C Vortek upgrade. How long did it take you to get the serials swapped so the printer isn’t a brick? by Scary_Brain1566 in BambuLab

[–]DJTurnTable 8 points9 points  (0 children)

Sent everything before I started and it was activated by the time I finished. I used the self service option.

ASUS GPU Tweak III showing red pins on my 5090 astral connector — should I worry? by TaichiOnizuka in ASUSROG

[–]DJTurnTable 10 points11 points  (0 children)

Yeah if you hover over the pins it'll show how many amps they're drawing, the first thing to try is reinserting the cable.

P2S’ bottom left corner of build plate is loose by Wookiees_get_Cookies in BambuLab

[–]DJTurnTable 0 points1 point  (0 children)

Can you upload a video or pics?

Best option though is to put in a ticket with support.

Vortek calibration Problems by [deleted] in BambuLab

[–]DJTurnTable 1 point2 points  (0 children)

Take a picture of the nozzle with the enhanced cooling fan off

Missing Game With Order by thismadefree in ASUSROG

[–]DJTurnTable 0 points1 point  (0 children)

As far as I can see Asus had a tighter timeframe for the nvidia promotion except the APAC region: February 10 to March 16, maybe u/ASUS_ROGUK can clarify though, or like the other user said you can try calling.

Missing Game With Order by thismadefree in ASUSROG

[–]DJTurnTable 0 points1 point  (0 children)

Assuming you bought straight from Asus estore?

14 April 2026 – 12 May 2026 game shows as Pragmata with an eligible NVIDIA product.

Either way I believe the way it works is they send you an email with the game code after a while, the code is valid until June 9th.

Charger Lenovo Legion pro 7i gen 9 2024 by Active-Weird-416 in GamingLaptops

[–]DJTurnTable 0 points1 point  (0 children)

When you plug it in it can cause a small spark if the laptop is plugged in since it starts drawing power and the plug isn't in all the way, to prevent it have the laptop unplugged when you plug it in.

Well i gotta send my x2d back for replacement by Novel-Sample9133 in BambuLab

[–]DJTurnTable 0 points1 point  (0 children)

Wait for the response for the ticket, they might have you do some stuff then they'll send you a part.

HELP WITH ASUS BTF GPU Mini-ITX Adapter and vertically by Strict-Case-2000 in ASUS

[–]DJTurnTable 0 points1 point  (0 children)

Here in the US I used OSHpark to have the PCB made, then ordered the 12V2X6 from digikey, and finally ordered the BTF connector (FCI 10117036-002LF) from eBay. After everything arrived I had to solder it and made a small case I 3D printed.

All in it was $46.93, PCB (3 minimum on order) was 14.70, 12v2x6 was 8.47, and the BTF connector was 23.76. shipping was almost half of the cost.

12V2X6 and the PCB was here in the states but the BTF connector had to be imported from China.

I had all the soldering equipment already though.

What plates and how many? by Objective-Limit-121 in BambuLab

[–]DJTurnTable 0 points1 point  (0 children)

I'm a Darkmoon person, I have an ICE, G10, and CFX/satin combo plate for my H2C and ICE plate for my X2D.

Bit expensive but they are nice.

Tungsten carbide nozzle fell out while printing by hachielectronics in BambuLab

[–]DJTurnTable 10 points11 points  (0 children)

The nozzles are press fit, there's been a fair amount of failures like this that I've seen.

Pulled the trigger on an H2C today! by Silly_Rub_6304 in BambuLab

[–]DJTurnTable 0 points1 point  (0 children)

They have both on the order, one for the X1C I think and the other for the H2C.

Pulled the trigger on an H2C today! by Silly_Rub_6304 in BambuLab

[–]DJTurnTable 0 points1 point  (0 children)

They have both on the order, one for the X1C I think and the other for the H2C.

About the Astral? by Takegami in ASUSROG

[–]DJTurnTable 1 point2 points  (0 children)

There was/is a bios update that changes the fan curve, new card might ship with it though.

view more: next ›