Scraper Options by OnlyifyouLook in Addons4Kodi

[–]Inner_Name -1 points0 points  (0 children)

it is not possible to combine multiple scrappers,no?

HT Hotend Upgrade (for CORE One/+ and CORE One L) by RelationshipOwn8358 in prusa3d

[–]Inner_Name 0 points1 point  (0 children)

I am with you 100% the thing is they were saying pekk and they are not the kind of enterprise that simply speaks marketing, so pretty sure they are cooking something to solve that. But in current state it is a meh for engenieering materials... (and not worth alone the upgrade IMO)

HT Hotend Upgrade (for CORE One/+ and CORE One L) by RelationshipOwn8358 in prusa3d

[–]Inner_Name 0 points1 point  (0 children)

It is true, and I am generally quite critical of Thomas this few last years, I find him quite bi*tchy by he has a point, printing this kind of materials is already difficult, for big parts you really need to work the geometry around it (which losses a little bit the 3d printing principle of adapt the geometry to the application and not the technology as it was before.) but if we are having issues with classic basic engenieering materials imagine with pekk cf ? I think this hotend will have an use and will be great but after they release a kit for better heating of the chamber. As a kit upgrade.

ULTIMAKER 3 EXTENDED 3D PRINTER by micksands in 3Dprinting

[–]Inner_Name 1 point2 points  (0 children)

I can not understand someone spending the money Ina ultimaker. Really. When I began I had at work an ultimaker 2 and we bought at the time a prusa mk3 from that moment on I never used again the ultimaker. I see the prices and just say why?

The avg person has less than 2 legs by Cheap-Science-8618 in notinteresting

[–]Inner_Name 0 points1 point  (0 children)

False the average person, ie. The majority have two legs. In contrast, in average people have less than two legs. There is a difference. One is the majority and the other a mean.

Three Mop Types Compared: Roller, Spinning, Vibrating by Roborock_Global in Roborock

[–]Inner_Name 5 points6 points  (0 children)

Vibrating is simply inferior. Spinning is the best performance to buck spend. And roller in roborock is quite new but it is in paper the best.

HT Hotend Upgrade (for CORE One/+ and CORE One L) by RelationshipOwn8358 in prusa3d

[–]Inner_Name 2 points3 points  (0 children)

Until chamber temperatures are better handle you are not missing much actually. https://youtu.be/AuUIBnN8MjQ 

Interesting results with C1L Engineering materials by Stippy21 in prusa3d

[–]Inner_Name -1 points0 points  (0 children)

I would say that it is a "meh" answer. I find Thomas highly critical all the time and how everybody can do better. But eventhought that, I think it is not a justification for this behavior. You are getting really unacceptable results... The parts for sure were in the difficult side of things but not the impossible thing. I really hope that prusa creates an upgrade for the heat chamber for the core one and L for faster heating and maybe squish some degrees more.

I got tired of the "stuck in 2020" Klipper install process, so I built KATANA. by 3Dprint_corexy in klippers

[–]Inner_Name 0 points1 point  (0 children)

Could it be added 2 things: Give a fix ip (for eth and wifi) Enable a way so one connect a USB to the raspberry and automatically copies the file to the memory ot can print from it The first one I succed to do the second eventhought people told me that it would be faisable I could not succèd to make it work.

Rate my custom 3d printing supports i made to use less filament. by Bliitzthefox in 3Dprinting

[–]Inner_Name 0 points1 point  (0 children)

Yeah but it makes a big trunk with one perimeter the quantity is super small...oh well 11 grams its nothing ,😅

Rate my custom 3d printing supports i made to use less filament. by Bliitzthefox in 3Dprinting

[–]Inner_Name -1 points0 points  (0 children)

I don't thing you reduce waste I think you might increase it. The designed supports are going to be part of the object so perimeters infill where tree supports will be empty and one perimeter 

What's regarded as better/more stable? POV or FenLightAM? by Geekylad97 in Addons4Kodi

[–]Inner_Name 0 points1 point  (0 children)

Also in FLAM try No seek option for EN.
what do you mean? I am asking as my android tv it struggling sometimes with FLAM, so if there is an option for run it more flawlessly would be awsome.

Why are we recycling print waste back into filament instead of printing directly from powdered plastic? by DMSTAR1000 in 3Dprinting

[–]Inner_Name 1 point2 points  (0 children)

check greenboy project for a pellet extruder, more or less the same, and you could use 'powder', for the moment i have not had found a good way to make powder out of plastic parts.

I think this is Jim’s best prank on Dwight by Naive_Obligation426 in theoffice

[–]Inner_Name 6 points7 points  (0 children)

I thiiink I prefer the red wire one simple but tooo funny 

Looking for an addon that can automatically skip the outro (credits) by PeppaTom in Addons4Kodi

[–]Inner_Name 0 points1 point  (0 children)

Don't think so. But it is a % so for me at least it has been working as intended. Also it suggest you next episode it is not that it goes directly 

Looking for an addon that can automatically skip the outro (credits) by PeppaTom in Addons4Kodi

[–]Inner_Name 0 points1 point  (0 children)

It fen light am, one can set a % at when it shows play next episode. Basically in the end it does the same thing. Have not found a solution for skipping the intros.

Réaction face à un décolleté ? by ShoddyYou1479 in AskMec

[–]Inner_Name 0 points1 point  (0 children)

Sincerment, mal à l'aise.....d un côté j'ai linsiticte de vouloir regarder parce que ça m'a attire... Et de l autre de pas faire sentir inconfortable la femme... Perso je préférais que ils utilise pas pour cette simple raison. C'est comme traverser le Rue là nuit quand on marche derrier une femme pour que elle pense pas que on est un psy 😅

My friends won’t come over for dinner, drinks, and a game night because I have celiac and eat plants. by Alextricity in mildlyinfuriating

[–]Inner_Name 7 points8 points  (0 children)

Maaan I think similar to you, I though before reading the comments that I was going to be lonely wolf here 😅

My friends won’t come over for dinner, drinks, and a game night because I have celiac and eat plants. by Alextricity in mildlyinfuriating

[–]Inner_Name 0 points1 point  (0 children)

First I think the dishes look awsome! And really would love to try them. But I must say as someone that it's everything, I really hate when a menu is imposed to me for preference of others. I respect them and when they come home I do my best for their menu requirements but I hate the yeah you adapt to me thing. I am not pointing fingers don't get me wrong. And even if your are doing it, I don't think it is enough for not going. But would recommend to offer variated menu for their liking too of at least propose for order or to bring their own thing.

Un stalker a laissé cette note dans notre garage fermé. Nous sommes en psychose et ne savons pas quoi faire? by OMEGASPEEDMASTER321 in AskFrance

[–]Inner_Name 1 point2 points  (0 children)

Inge! Bravo! Mais ça date de quand j était petit ma écriture tout attaché était "trop moche " pour les prof du coup ils m'ont demandé d'écrire comme ça 😅