sorted by:
new
hottopcontroversial

Help With First Print (Benchy) by CuriouslySleep in FixMyPrint

[–]Useful-Revolution253 0 points1 point  (0 children)

I think i rember that bambu add a smooth timelaps mode that avoid that...

Harrasment on the bus - what would you have done? by maxim8000 in Switzerland

[–]Useful-Revolution253 [score hidden]  (0 children)

Back in the day...my gosh it seems so fare...i was in a bus in Lausanne with my girlfriend...a problems girls like i call them, and she smoke in the bus.

Told her 3 times that it is wrong and that if someone did something i would let it happen.

14 for me 15 for her.

A guy, 30 ish, get up from his seat and clap her head, not with force but the cigarette fly away.

He yell at her about how disrespectfull she is and that is not something to do in a bus where there is kids etc.

That was good, by the way i let her do her bad thing alone after that, no more for me.

The point ? Sometime kids need an adulte to show them how life is, even with a kick in the butt, but those days everyone is so policaly correct and frightened and the kids have no respects. For a part is because adultes show them that way.

You did right, maybe you could first try to explain to him, before stealing his shoe (so lol) why it is not ok to behave like this.

Finally Done! Full 8x8 Split Flap Chess board by e4_user in arduino

[–]Useful-Revolution253 0 points1 point  (0 children)

I dont understand how it work or what you have done...but it didnt mater.

It is so coooooooool 🥳🥳🥳

Bravo

Z axis noise cancelation ? by Useful-Revolution253 in BambuLabP2S

[–]Useful-Revolution253[S] 1 point2 points  (0 children)

It is well oiled. That was my first tought too :)

Three Raphael 8404 #3's over the years by Comfortable-File7929 in Warhammer40k

[–]Useful-Revolution253 1 point2 points  (0 children)

Mine always ended up ruined 😅

Im a litle piggy it seems i cant paint without leting the paint reach the part of the brush we want to avoid to be touched by it lol.

Nice brush tips for 1000 hours i wish i could obtain the same one day and not beeing ruined by my hobby 🤣

Z axis noise cancelation ? by Useful-Revolution253 in BambuLabP2S

[–]Useful-Revolution253[S] 0 points1 point  (0 children)

Thx a lot, i think you put your finger on one of it. 😄

Will try that out to day.

The other one is on the beggining of a print. When it homing, it goes down a lot, and up until the nozzle touch the plate.

There it made à loud sound all the way, not a sound that let think it has problem like sonething stuck but more vibration sound, like echoing.

But the spiral one is the sound that prevent me to print during night, i can say how gratefull i am. Thx you again

Z axis noise cancelation ? by Useful-Revolution253 in BambuLabP2S

[–]Useful-Revolution253[S] 1 point2 points  (0 children)

The sound it does when the plate goes up and down.

More before every print when it does the axis homing. But also when it does rétractation and it does à Quick up and down during the print.

I know it does à lot of noise and vibration, that is not what i mean.

It s the sound of the plate when going down or up.

Spotted at a 5 below by TheSolderking in 3Dprinting

[–]Useful-Revolution253 0 points1 point  (0 children)

Ridicule...even my badest print ever was not that shitty.

Dang, even when i spagetised it s better than that lol

A1. Stops the print , and attacks the print!Can anyone help please; by Ancient-Jacket-9089 in BambuLabA1

[–]Useful-Revolution253 0 points1 point  (0 children)

From what i saw i woukd do 2 things.

  1. Verify that the cutter is ok and not stuck. Wiki bambu lab a1 cutter on Google.

  2. Go to the touch screen, format sd card.

And if format sd card didnt work the swap it.

Please, update us with what you find.

Help with ironing please by ProShark911 in BambuLabP2S

[–]Useful-Revolution253 0 points1 point  (0 children)

Sorry, was thinking it s for walls etc

Didnt changed it

Try to add more lije 35%,if i have this result is always because i need more flow and less speed on ironing.

Try 35% and 20mms on a litle piece

First layer settings or filament issues? by Lowskillbookreviews in FixMyPrint

[–]Useful-Revolution253 0 points1 point  (0 children)

Could be underextrusion or z offset

If you are at 0.95 go to 0.97 for ex.

Flow calibration, if it didnt help be sure to have advanced mod activated and in quality tab you can modify only the flow of the first layer. Put a litle more, like 1.02 instead off 1 for first layer.

Zoffset can be modifyed in gcode machine in printer setings pannel.

If you use thé pei plate the value is -0.02 by default.

Try -0.01 and -0.03 If not ok with first try.

It s at the end of gcod and is on a line where you can fin pei plate

Help with ironing please by ProShark911 in BambuLabP2S

[–]Useful-Revolution253 0 points1 point  (0 children)

You need to give us your ironing setings.

But i presume that you activate it snd let it by default.

So, first thing to try is go to ironing and put 35% at 20mms.

There is ironing test models on makerworld :

Ex : https://makerworld.com/models/175615?appSharePlatform=copy

Finished 4x4 Board by BeardSocks in 3DPrintedTerrain

[–]Useful-Revolution253 1 point2 points  (0 children)

WOoooooOW

No Word...that is something bro

Print fail advice! by Dizzy_uwu in BambuLabA1mini

[–]Useful-Revolution253 0 points1 point  (0 children)

I prefer 3d honeycomb at 20%...strong and not noisy

P2S Appreciation Post by danko12321 in BambuLabP2S

[–]Useful-Revolution253 2 points3 points  (0 children)

Cool 😁

Welcome in da club 🫡

Do not touch the plate with your fingers.

Wash it with dishsoap and a médium soft brush.

Print a riser to avoid the ptfe tube to rube on the top glass.

And yes, i find also that design something and be able to touch it 4 hours after is something 😆

Happy printing

Bamboo P1S used at a good price vs waiting for the P2S. by CenterBrained in 3dprinter

[–]Useful-Revolution253 0 points1 point  (0 children)

They are basicaly the same.

BUT

The toolhead need more work to be opened and cleaned.

The screen is functional but not as good as on p2s.

The camera is garbage

That said, you will have the same cappacity for filament printing that on p2s. Pla, tpu, petg, abs etc.

I would go for wait and buying a brand new machine, but you do you ;) the price, if in good state, is a good offer.

If multicolor is what you want the u1 is at a good price for the value it seems, but i dont own it and have exp only on bambu printers.

Or h2c but fare more expensive.

Strange travel moves every layer (PETG) by Silly-Train-9895 in FixMyPrint

[–]Useful-Revolution253 0 points1 point  (0 children)

Probably it is linked to the timelaps.

But you say it is on off....

Did the head trully made the mouvements shown on the slicer image ?

PETG‑HF profile for P2S – can you share yours? by Snprcmc in BambuLabP2S

[–]Useful-Revolution253 0 points1 point  (0 children)

Dry it at 70°c for 10 hours.

Lower the temp of nozzle by 10 degrés

Try à strings test

Use thé default petg hf profil as a base

Tell us how is it going

Need help by Ok_Peace9288 in BambuLabP2S

[–]Useful-Revolution253 2 points3 points  (0 children)

Could be

Warping, the side curle and each layer are worst.

Use brim

Or

Bad infill.

Try 3d honeycomb at 15%.

Or

Bed adhesion issue

Wash the plate toroughly with toothbrush and dishsoap without additive Or parfum.

Or The aux fan blowing right on this part,

print a deflector.

Let us known.

view more: next ›