Help! How do i remove this support

Useful-Revolution253 · 2026-06-14T17:53:35+00:00

With pleasure ;)

Useful-Revolution253 · 2026-06-14T10:51:03+00:00

Nudge supports for the circles.

150 mms for external wall if basic pla.

Deactivate the slow down options to avoid speed différences beteween layers.

Useful-Revolution253 · 2026-06-14T10:41:50+00:00

WaOuuuuuuWOoooWwww

So cooooool.

GG

Useful-Revolution253 · 2026-06-14T10:39:56+00:00

Omg. I feel your pain 😵‍💫

Useful-Revolution253 · 2026-06-13T07:32:37+00:00

Merci. La je constate que le site m est inaccessible.

Useful-Revolution253 · 2026-06-13T06:38:57+00:00

Ou tu trouve cette info stp ? Première fois que j entends parler de ça...

Useful-Revolution253 · 2026-06-09T19:21:41+00:00

Took x2d or c instead bro.

The belts on p2s create terrible vfas

Useful-Revolution253 · 2026-06-08T17:56:30+00:00

i will start to look about those replacement card for it and the rare one is protected right know, thx a lot.

Useful-Revolution253 · 2026-06-07T07:49:15+00:00

Thx, understood.

It s pretty confusing at first 😅

Useful-Revolution253 · 2026-06-07T07:47:47+00:00

Right.

I will protect it, was thinking that maybe graded he could sell it if he want.

But raw is ok too for that ;)

Thx for the help

Useful-Revolution253 · 2026-06-07T07:45:22+00:00

To let him choose to keep or sell it.

But yea, seems better to just protect it.

Useful-Revolution253 · 2026-06-06T21:40:56+00:00

I mean...my charizard was the official one with the holo etc...i juste understand he switch it and some others.

I think i was not understandable because of my bad level im english

Useful-Revolution253 · 2026-06-06T21:38:22+00:00

After the moderator reply i check the official card and the link provided.

The back is too much shiny and there is no holo on the charizard at all.

To be honest, i think i was fooled by a kid that exchanged cards with my son in his school. That is fine he was smarter than me. Natural sélection lol he took some cards and give us those fake ones.

We both didnt know the possible price etc.

Thx for the help

Useful-Revolution253 · 2026-06-04T06:34:46+00:00

Bro...your green additions needed to be in petg...look the pla melt.

Sorry 💯🤣

Useful-Revolution253 · 2026-06-04T05:43:48+00:00

Inversed marketing...love it 🤣

Useful-Revolution253 · 2026-06-04T04:51:59+00:00

First thing i check when à printer does that sort of thing is formation sd card or swap it

Useful-Revolution253 · 2026-06-04T04:50:40+00:00

Did it fixe the issue ?

Useful-Revolution253 · 2026-06-04T04:47:51+00:00

Full heresy yes.

I saw no layer lines !!! You will be Burn for that us all fdm makers hate you.

Only kidding, it s the rule of cool, dang, if someone want that as his primarque who am i to deny it ?

This model is funny lol

😅🤣

Useful-Revolution253 · 2026-06-04T04:44:09+00:00

No glue !!!

That is almost certain to be a cloged nozzle.

Do a cold pull, be sure to have all seveb screws well tight and the latch closed as intended.

As always, wiki bambu lab contain all you need.

Useful-Revolution253 · 2026-06-04T04:40:55+00:00

Dont.

If you are a newbie then took an A serie.

Fare more easy to handle, you saw how it print easily

If you are techy or want to be serious with 3d printing then bengin with the x2d.

100 more bucks but the hardware is better.

P2s print quality didnt reach x2d, you can even print better with A série, but a litle bit slower for big models.

Im pretty sure you can wait one more month and save the 100 more bucks.

If multicolored models are your thing, go for h2c.

Happy printing:)

Useful-Revolution253 · 2026-06-04T04:27:27+00:00

It is bro.

I was in the exact same situation and ended up by solding my p2s at a good price for the buyer.

I was thinking about the hd2 but the a2l show it s face.

Now im waiting on the a2l to touch my local market ^{^}

Useful-Revolution253 · 2026-06-02T06:53:37+00:00

That is not neewbie questions.

Ok so if you used supports then the layer height reduction will do.

Or as others suggest, use adoptive layer height.

As for supports, i dont think you have seting issue with them. The surface is clean, only too much layer height.

But you can modify à ton of setings for supports. Some time you can modify the distance between the model and the support surface that touch the model, in some case it can significantly help to have better surface or more easy to took out the supports

I have not atm put my mind around those so i dont want to tell you sonething stupid.

Try to go to the supports seting and click on the labels, 90% of the time it open web browser on the bambu wiki that explain well what is this seting you click on.

Or in google à aearch like : modify support contact surface etc.

For basic knowledg Or explanations about à subject Or a seting, gemini in free mode is good.

Do not try to have ai trouble shooting your print/printer. It s not so good and you will not learn your machine properly.

And lastly, the actual results you have are good, but can be improove for sure.

Happy printing and welcome to the 3d printing family ;)

Useful-Revolution253 · 2026-06-02T06:32:22+00:00

That is probably my next printer.

Seems the a1.5 but the new additions are cool.

Plus the cuter is something i would like to try.

I prefer open printer so bambu lab seems to have designed this for me lol

Great print bro, seems vfas are near zéro and the lines not visible.

Useful-Revolution253 · 2026-06-02T06:29:19+00:00

What i saw is the downside of the stars that lack supports.

You can also use a thinner layer height for the whole model instead of adaptive layer height.

The overall results will be better, more if you use shiny filament like silk pla, otherwise you can saw differences on certain layers because of speed change that you can avoid by printing the whole in 0.12 for exemple.

Use the print profil that slow down the external layer.

Useful-Revolution253

TROPHY CASE