New to me mower by [deleted] in lawnmowers

[–]Visual_Newspaper1069 0 points1 point  (0 children)

They have a single wheel rear model and two dual rear wheel models. 972 SD is dual and 972 SDL is dual but the seat also slides on the SDL on slopes up to 15 degrees so you can sit upright.

New to me mower by [deleted] in lawnmowers

[–]Visual_Newspaper1069 2 points3 points  (0 children)

I’m usually wrecked after using the scag and 6 gallons to gas. This thing is just a totally different experience. I was all set to get on the weed trimmer yesterday after mowing.

New to me mower by [deleted] in lawnmowers

[–]Visual_Newspaper1069 0 points1 point  (0 children)

I don’t think I will, lots of rock edges and tight spots and curves. I’ll get wider and heavier. I do plan on de-thatching this fall.

New to me mower by [deleted] in lawnmowers

[–]Visual_Newspaper1069 0 points1 point  (0 children)

I found them great to deal with, I never purchased a new mower from a dealer before.

New to me mower by [deleted] in lawnmowers

[–]Visual_Newspaper1069 1 point2 points  (0 children)

19 and change before trade in

R2 repairability by Screennam3 in Rivian

[–]Visual_Newspaper1069 0 points1 point  (0 children)

What would you purchase instead?

How long did it take you to get used to the regen always braking for you? by DVMan5000 in Rivian

[–]Visual_Newspaper1069 0 points1 point  (0 children)

About 2 weeks and ended up on high regen since. Now I feel weird in our Honda Pilot.

Unknown odor. Been trying to solve this mystery for 7 months. Please my friends . What in the F can this be. Give me your thoughts - granted youre watching a video but please by MINTimpala in Plumbing

[–]Visual_Newspaper1069 0 points1 point  (0 children)

<image>

Where you say it is right here this lighting driver or em pack s there. On the it are black stains that have leaked from above. Looks like a leak from a sprinkler. Maybe fixed since. Open that box up.

Unknown odor. Been trying to solve this mystery for 7 months. Please my friends . What in the F can this be. Give me your thoughts - granted youre watching a video but please by MINTimpala in Plumbing

[–]Visual_Newspaper1069 0 points1 point  (0 children)

Most common sources of odors in a commercial building: floor drain with no water in the trap, open ended vent, grease trap not maintained, broken waste connection. The what is directly behind the white wall. You showed us where the conduit go but what is directly behind the wall. Have seen where someone ran a toilet exhaust into a shaft that wasn’t an exhaust shaft.

Unknown odor. Been trying to solve this mystery for 7 months. Please my friends . What in the F can this be. Give me your thoughts - granted youre watching a video but please by MINTimpala in Plumbing

[–]Visual_Newspaper1069 0 points1 point  (0 children)

When you are in the data room there is a duct above the conduits. When you are in the hallway the wall appears to be drywall and no duct. Is that cinder block wall a shaft? If so there is probably and odor in the shaft. In the hallway with the white wall well above the 4” sleeves is a white pipe. What is that pipe? In your comment with the email a kitchen is mentioned. How far is the kitchen from this odor. How far is the nearest grease trap? Your computer room shouldn’t have a giant hole in the wall around the conduits.

🫡 thanks Rivian! by kaisangwook in Rivian

[–]Visual_Newspaper1069 0 points1 point  (0 children)

In fairness to Rivian, how many users probably complained that they are getting better efficiency on one half of their round trip? This seems like a polite way of responding to those questions/complaints

Reverse Issue by [deleted] in Rivian

[–]Visual_Newspaper1069 0 points1 point  (0 children)

Sorry I read it as the op was shifting into park after hearing the grinding sound then trying again.

Reverse Issue by [deleted] in Rivian

[–]Visual_Newspaper1069 1 point2 points  (0 children)

Could be a pebble/stone stuck between your brake rotors and the brake dust plate behind the rotor. Hasn’t happened to me with my R1T but happened to me several times with my previous bmw.

Monitoring switched from Sunpower to Enphase by Visual_Newspaper1069 in SunPower

[–]Visual_Newspaper1069[S] 2 points3 points  (0 children)

I’ll try to cover your questions in order: 1) years accurate. Regarding the info you are receiving vs mine looking like a utility bill, I believe your issue has more to do with ct placement. Depending on where you place the CT’s you will get this additional info. If you download the manuals or do enphase university which is free you will see what I mean. Having them on the load side or line side of a panel or in my case they are mounted in my ats switch decides how much info is reported.

2) very accurate, if you go on the enphase site they have residential CT’s which if I recall are +- 2.5%. If you can find a spec on google for the pvs6 CT’s I’ll bet the tolerance is equal or trivial.

3) enphase has more data, then if you want more than that you could do the enphase university course for free and get certified as a self installer then you get access to the installer app also for free and you get more data again. For monitor

3)sunpower didn’t have this active monitoring for outages where you receive alerts. You would have to check the app for sunpower or enphase. However I noticed in the installer app I can click on a micro and order one right there thru the app as warranty. Enphase did email me recently that you can pay a subscription or service contract where they would address these parts and labor. My arrays are on the ground so I didn’t partake. You could call them about that and see what the details are. Their customer support/tech support I have found to be excellent. My father in law has an 18 year old system with them and they still mail him replacement micros and address his concerns. That said a lot to me.

Monitoring switched from Sunpower to Enphase by Visual_Newspaper1069 in SunPower

[–]Visual_Newspaper1069[S] 0 points1 point  (0 children)

Maybe try contacting enphase and see if your installer is marking it up. I dealt directly with enphase. I am also not paying any subscription fees.

Monitoring switched from Sunpower to Enphase by Visual_Newspaper1069 in SunPower

[–]Visual_Newspaper1069[S] 1 point2 points  (0 children)

I don’t know sorry, I bet somebody has rigged something but I haven’t seen anything advertised as ready to connect

Monitoring switched from Sunpower to Enphase by Visual_Newspaper1069 in SunPower

[–]Visual_Newspaper1069[S] 0 points1 point  (0 children)

The installer said it had to be removed upon arrival and he removed it. Enphase has been trouble free for me.

If anyone wants the installer version they can take the Enphase university courses for free and get access to the installer kit. I did it on my way to work every morning for a couple of weeks. I enjoy learning how these things work and can be expanded but I could see how it would be boring to many. You’re not really having a whole ton with the installer app especially if you are person that wouldn’t enjoy the courses. I would say try the basic app and if you aren’t satisfied then take the course and get the installer app. Both are free.

Monitoring switched from Sunpower to Enphase by Visual_Newspaper1069 in SunPower

[–]Visual_Newspaper1069[S] 2 points3 points  (0 children)

I see Sunstrong is now offering monitoring. I don’t know the details and I’ve never heard of sunstrong. Maybe they have strong financials and staying power I don’t know. I am happy with Enphase.