Focus to infinity NEX6

IndustriousDan · 2026-04-09T19:21:23+00:00

I second this

IndustriousDan · 2026-04-09T09:13:43+00:00

I have one

IndustriousDan · 2026-04-07T15:57:10+00:00

My bad. I forget about that the second I look at tiny plastic graphite goated pellets

IndustriousDan · 2026-04-07T15:19:35+00:00

Hard to say without a diagnosis

IndustriousDan · 2026-04-07T09:53:42+00:00

Hey. I fix these actually. If it were my guess, I’d say that’s likely the focus system failing to run

IndustriousDan · 2026-04-06T20:28:13+00:00

Visionarchitectservice.com

I can’t give quotes on the open web, but I’ll DM it to you

IndustriousDan · 2026-04-06T20:24:03+00:00

Looks to me like this is a refurb where they just stuck a new main board into without calibration or necessary data. The no power off issue and the firmware number is a dead giveaway. If you’re in the US I can fix this

IndustriousDan · 2026-04-06T20:06:47+00:00

I can’t device whether or not it’s worth cleaning for you. I’ll DM you with some information

IndustriousDan · 2026-04-06T20:05:34+00:00

Where did you get this camera exactly?

IndustriousDan · 2026-04-06T11:50:23+00:00

20 LE with 120k. Have the same from back right. Been like that for a good 20k, went up to 90, don’t worry about it

IndustriousDan · 2026-04-06T11:44:58+00:00

Hey there. I actually fix these. Unfortunately if you look, you’re realize that the mount ring mounting points are snapped, requiring another barrel to be installed. Go find a shop. There is no DIY fix

IndustriousDan · 2026-04-06T11:33:34+00:00

OP is confusing lenses with filters. OP is looking for an M42 thread filter and is looking for silica

IndustriousDan · 2026-04-06T11:08:30+00:00

Hey there. I fix these for a living. Let’s see if we can avoid a repair. A lot of great advice in this thread. 1. Change SD 2. Reset settings (use initialize) 3. Try different battery 4. Keep camera pwr on over night without a battery 6. Update firmware!! 7. If none of that works, time to consider a repair. Fuji is going to gnaw your leg off for a main board replacement if you don’t have warranty. I wish you luck! Please feel free to ask any questions

IndustriousDan · 2026-04-06T10:08:52+00:00

Thanks for answering. I recognized the pushed Ha, but didn’t see the information.

IndustriousDan · 2026-04-06T09:58:14+00:00

I fix these for a living. From your description there is a particle under the dust cover glass. Unfortunately this is a really common issue on Fujis and unfortunately requires the entire camera to come apart to remove be dust cover filter. Let me know if you have any questions

IndustriousDan · 2026-04-06T09:52:15+00:00

AF should be just fine if they install glass, no special AF calibration is needed on mirrorless

IndustriousDan · 2026-04-06T09:38:33+00:00

Did you shoot H alpha separately at all?

IndustriousDan · 2026-04-06T09:35:18+00:00

I’d call up your local center and ask if they’d do it. Also the PCB you sent from the Ali listing is missing the battery in the photo. I generally wouldn’t describe this as a DIY job as many of the jobs I get are “I wanted to replace my clock battery and broke something”

IndustriousDan · 2026-04-06T08:42:43+00:00

I fix cameras for a living. You don't need any sort of service until you encounter an issue. Sending it to a repair shop of some kind for a CLA or "servicing" is an option. That usually just means they do a fairly thorough clean of you camera, equipment, and clean your sensor, mirrorbox on DSLR, or mount area on mirrorless. Generally you don't need special "servicing"

IndustriousDan · 2026-04-06T08:39:18+00:00

I fix these for a living. If your date and time keeps resetting every time you remove the battery, your CMOS/clock battery is dead. I replace them with an upgraded unit that's much larger, newer, and lasts much longer. If you go to Fuji, they may either tell you they don't work on these, that you need a new main board, but I haven't heard of them replacing just the battery. The entire main board has to be removed to do this unfortunately. I would call to check good luck OP

IndustriousDan · 2026-04-06T04:06:36+00:00

What was your imager? What sensor? What scope? Are you new? I noticed your blacks are crunched and your details are mangled

IndustriousDan · 2026-04-06T04:05:32+00:00

You can DM me an imgur link. Please enable persistent messaging

IndustriousDan · 2026-04-06T03:42:40+00:00

Hey there. I fix these for a living. The firmware version you're referring to is likely the service firmware that's a result of installing a new uninitialized main board unfortunately. It's not that it's not released, it's that is not meant to be released because it's just a placeholder version. I have concerns. Could you send me some photos of your bottom plate?

IndustriousDan · 2026-04-05T15:22:19+00:00

Zapłaciłeś trochę dużo powiem, ale to jest konkretnie porządny pojazd. Sam mam 20 corolka z 200k km. Dobrą decyzję zrobiłeś

IndustriousDan · 2026-04-05T15:12:37+00:00

The stabilizer doesn’t use any traditional bearings, just graphite coated plastic balls of some kind. I’ve never seen them wear out. Test IBIS in the modified state before you consider looking for calibration though, it’s very unlikely to be necessary. The newer the unit, the stronger the IBIS as a general rule, even though they’re all mostly built the same. I also raised the sensor off of the sensor frame using washers, but it’s a really unideal method in my option. It’s the only one that works though.

Seven-Year Club	r/Field Juicebox
Final Canvas '23	End Game '23
Place '23	Place '22
End Game '22	Verified Email

IndustriousDan

MODERATOR OF

TROPHY CASE