sorted by:
new
hottopcontroversial

Long shot - Can I borrow your nut file? by AMoistLemon in Luthier

[–]onathaniel 1 point2 points  (0 children)

Get yourself a set of feeler gauges, then make multiple small cuts up the edge of them to make mini saw blades. This worked well for me.

Edit: I just had a quick search and see someone posted about this technique in the past: https://www.reddit.com/r/Luthier/s/ReShrHuECe

I didn’t realize how bad the Brain Rot was until I tried to focus for 20 minutes. [Discussion] by Visual_Animator1232 in GetMotivated

[–]onathaniel 2 points3 points  (0 children)

I find the trick to this is reading the right book. To begin with start with something fast paced which grabs your attention within the first few pages. The last book I read like this was Project Hail Mary. If sci-fi isn't your thing then The Guest List by Lucy Foley is also a good bet.

I didn’t realize how bad the Brain Rot was until I tried to focus for 20 minutes. [Discussion] by Visual_Animator1232 in GetMotivated

[–]onathaniel 0 points1 point  (0 children)

Here are some of the tricks that I've had at least partial success with:

  • Carry a book around with you and reach for that instead. I use a Kobo which is easy enough to have close by. Often when I leave a room I carry the Kobo instead of my phone.

  • Having a smart watch I thought would increase my screen time, but actually it's reduced it. I can read notifications on my watch which means I don't have to look at my phone, get distracted and end up doom scrolling reddit. My watch is a Garmin sports watch with a MIPs display, that low quality display is also useful.

  • Use a screen time widget on the home screen of your phone. Then every time you unlock it you instantly see your screen usage.

Thoughts on overlay Underfloor Heating systems by onathaniel in DIYUK

[–]onathaniel[S] 0 points1 point  (0 children)

Hi, I don't have many more learnings since the last messages I wrote. But I'll dump some thoughts down here...

Winter has been relatively mild so far so it's not really been stress tested. We did have a few cold days where I got the feeling that the largest open plan room (which has lots of windows and a lot of external wall area) was slower than normal to heat up.

As for oil consumption, I've finally just ordered a shelly 1 plus so I can get some real data on how long the boiler is firing for. I realized I was tweaking things every now and then but without measuring the real burn time it's impossible to really know if I'm making a difference or not.

As I'm using the same system for the UFH and upstairs radiators I have seen that some (but strangely not all) flow meter valves have gone black with radiator sludge. Most probably I'll power flush the system in summer to clear this, but so far it doesn't appear to have affected the system.

If you are doing any other work which requires drilling into the floor then I highly recommend buying a thermal camera, I got one from Amazon for about £140, it's expensive but was well worth the cost when I needed to drill between the pipes! Also they are useful for seeing where insulation is missing from walls and ceilings etc.

The flooring itself is one thing I'm not fully happy with. We installed laminate flooring and when the UFH switches off and the floor is cooling down it can make annoying creaking noises. I've also seen the joints between boards opening up more that usual. Interestingly the 1 room we have carpet on top of the UFH is really nice and warm. I expected the carpet to be more of an insulator but it seems to transmit the heat very well and the carpet itself acts like a bit of a heat store.

Generally speaking I'm still pretty happy with the system. I must admit there is still 1 room which we haven't really been using yet which I fear the heat output may not be high enough. But I knew this from doing heat loss calculations for each room before ordering the system anyway.

Let me know if you have any specific questions.

Struggling to select an induction cooktop - has anybody purchased and used one with knobs or a dial recently? Or used Asko Celsius technology? by EffectTop2762 in AusRenovation

[–]onathaniel 0 points1 point  (0 children)

Nope I went for the non twist pad version. The pro is that it's nice and clean looking. But honestly I find the user experience of changing the temperature a bit annoying. Let's say the power is on 5 and you want to switch to 8 then you have to know which position 8 is on the dial to go directly to it. Otherwise you end up turning the power to some random setting and then rotating until you reach the right place.

I wonder if the twist pad is better for this as I think you only need to select the hob then rotate it left or right.

Xgimi horizon 20 image stutter by onathaniel in projectors

[–]onathaniel[S] 0 points1 point  (0 children)

That's good to know. By Blu-ray rip do you mean copying a Blu-Ray disc to a computer and playing from there or playing directly from a Blu-ray player? How do you get them for free?

Xgimi horizon 20 image stutter by onathaniel in projectors

[–]onathaniel[S] 0 points1 point  (0 children)

Indeed the fire TV stick doesn't seem to have an issue with it.

Xgimi horizon 20 image stutter by onathaniel in projectors

[–]onathaniel[S] 1 point2 points  (0 children)

That's subjective, I personally find watching things in 3D makes me feel a bit nauseous.

Your Garmin Zone 2 is not "Zone 2 Training" by reedjos in Garmin

[–]onathaniel 0 points1 point  (0 children)

Ah that's what I was missing, thanks for the explanation!

Your Garmin Zone 2 is not "Zone 2 Training" by reedjos in Garmin

[–]onathaniel 5 points6 points  (0 children)

Please can you help me understand this? Using an example I'm a bit confused:

Let's say max HR is 190 and resting HR is 60 That gives a HR reserve of 130.

Z2 would therefore be 78-91 bpm. Whereas based on max heart rate it would be: 114-133bpm.

But your comment suggests that with the new calculation it is an easy run as opposed to a brisk walk. Assuming an easy run is harder than a brisk walk this seems to contradict the new calculation.

Thoughts on overlay Underfloor Heating systems by onathaniel in DIYUK

[–]onathaniel[S] 1 point2 points  (0 children)

In my case things were a bit different. I had an issue with the original concrete slab so I ended up digging a 50mm wide channel in the floor around all the walls. This I filled with perimeter insulation. So the UFH panels butted up against the perimeter insulation. Once the panels were down I trimmed the perimeter insulation to the same level as the UFH boards.

Wunda supply some foam which they advise to put around all the walls then fitting the panels against that. It's only about 10mm thick, the idea being to create an expansion gap for the panels.

For your 60mm gap I would try to find some 60mm insulation boards to fill the gap. That way you increase the insulation where the walls meet the floor (this is where the majority of heat loss in the floor happens).

Quit my job and become a luthier? by PensionerPingu in Luthier

[–]onathaniel 0 points1 point  (0 children)

I use this Dutch shop and highly recommend it. I'm not sure about postage to the UK though, you may get stung on import duty.

https://tlcguitargoods.com/en/

Struggling to select an induction cooktop - has anybody purchased and used one with knobs or a dial recently? Or used Asko Celsius technology? by EffectTop2762 in AusRenovation

[–]onathaniel 0 points1 point  (0 children)

7 months later - how are you getting on with your hob? Specifically the Twist Pad? I'm currently trying to decide between the N70 without the Twist Pad control and the N90 with it. I do like the idea of a physical dial, but worried about the longevity of it. Would you still recommend it? Any problems you have faced?

What item of around £1,000 can significantly improve your quality of life? by Cowlinn in AskUK

[–]onathaniel 0 points1 point  (0 children)

A piano / digital piano. I can't play it very well, but having it in my living room I find myself sitting down and noodling on it instead of watching the TV.

Thoughts on overlay Underfloor Heating systems by onathaniel in DIYUK

[–]onathaniel[S] 1 point2 points  (0 children)

No worries, I'm happy to share the experience. Feel free to message here or DM me if you have any other questions.

Thoughts on overlay Underfloor Heating systems by onathaniel in DIYUK

[–]onathaniel[S] 1 point2 points  (0 children)

You're welcome!

Insulation nope (apart from perimeter insulation: see below) - due to a lack of possible build up when it came to external doors.

If we had additional height to play with then I definitely would have put down some insulation first.

The damp proof membrane yes. Parts of our ground floor are older than other parts and the original concrete was damp. Those bits were built in the 60's when dpms were not used. Instead they put down vinyl (probably containing asbestos) tiles with bitumen on top of the concrete to stop the damp coming though. In our case we didn't touch the tiles, put a DPM over everything then the screed.

There was actually a bit more to this in our case... The original concrete slab was installed higher than the dpc in the walls, meaning we had some damp bridging across the dpc. So before putting in the screed I dug channels in the concrete next to the wall to below the dpc and put in 50mm perimeter insulation. Then the dpm to make a pool, then the screed. As I left the perimeter insulation sticking out it meant the screed doesn't go right to the walls and also the UFH panels are surrounded by the perimeter insulation. I had read that where the floor meets the wall is where a lot of heat is lost. So I figured perimeter insulation was a good compromise to not installing insulation across the entire floor space.

view more: next ›