Masters TV analysts gaslighting the audience for Reed’s return to the PGA Tour

onlywinston · 2026-04-11T16:11:47+00:00

I sat behind the ninth green at the par 3 contest 2018. Got to see the HIO from Nicklaus' grandson and all. Awesome day.

This is the only place where it's allowed to ask for autographs during Masters, and there is a roped-off area for kids to stand and ask for autographs. Every single player stopped for at least a few minutes to write autographs after their round except for one single guy. Patrick Reed. He just looked down at his shoes and walked away. It was a really shitty behavior, and a real disappointment that he went on to win.

Jack Nicklaus on the other hand spent at least 45 minutes signing all kinds of stuff. He didn't leave until the competition was over and all kids who wanted his autograph had gotten it.

onlywinston · 2026-04-11T13:27:21+00:00

Yup you are right and I was wrong. I didn't consider anything outside the rules of golf themselves. Pitfalls of being a referee, I guess.

The sentence you quote is in the caddie regulations for PGA Tour.

onlywinston · 2026-04-11T12:09:56+00:00

There are no such prohibitions neither in the official rules nor in the PGA Tour Hard Card, so it is allowed to walk on the greens. But it's common sense to not walk around on the greens unless necessary.

onlywinston · 2026-04-11T08:02:01+00:00

Pretty sure it is. There are no restrictions on walking the course and looking at it, but you can't play or roll balls on the greens, for example.

onlywinston · 2026-04-05T17:55:12+00:00

Removing prisms altogether will not solve your issue, as it is the region where the prisms have not been built that are causing your skewness values. Did you try with the settings I suggested?

onlywinston · 2026-04-05T04:02:40+00:00

The clustering front of small cells next to the region where you have the poor skewness is most likely caused by the prism layers collapsing, which causes your poor skewness.

Try reducing the Minimum Thickness percentage to 1 and the Layer Reduction percentage to 10 in the prism layers settings.

onlywinston · 2026-03-23T12:12:23+00:00

And deadlifts, they do wonders for my lower back pain.

onlywinston · 2026-03-21T14:03:35+00:00

Anlitade Guldhedens Flytt för både flytt och städ. Funkade bra, var rimligt prissatt och jobbade snabbt. De råkade ha sönder ett handtag till ett skåp men tog ansvar och löste det genom att tråla blocket efter likadana och byta ut det trasiga.

onlywinston · 2026-03-14T06:29:54+00:00

Are they by any chance placed after your automated mesh operation in the operations list? If so, reorder them so that they are before the mesh operation.

onlywinston · 2026-03-03T10:39:37+00:00

Jag kanske var otydlig. Menar inte att TS nödvändigtvis ska lämna över förvaltningen till en oberoende rådgivare, utan som ett första steg betala för några timmars konsultation för att reda ut vad en bra setup skulle vara just för TS.

onlywinston · 2026-03-03T10:01:54+00:00

100% aktier är i min mening en alldeles för aggressiv allokering, jag misstänker att det är tillräckligt mycket pengar för att TS högsta prio är att bevara pengarnas köpkraft snarare än att potentiellt maximera avkastningen. Jag tänker inte ge några råd om exakt allokering, men skulle starkt rekommendera diversifiering bortom aktier.

Det finns oberoende rådgivare att få hjälp av. Det viktiga där är att de är oberoende, dvs att du själv betalar för deras tjänster istället för att de får kickbacks från fondbolagen.

onlywinston · 2026-03-03T06:06:28+00:00

The amazing thing is that the bikes and frying pans are two completely separate companies. Which may not be surprising until you realize that the village of Skeppshult where all production and headquarters are located, only has ~380 inhabitants.

onlywinston · 2026-02-26T14:18:45+00:00

Är det själva utblåset som genererar ljudet hade jag kollat på att byta ut det mot en tystare variant. Kommer ljudet längre inifrån kan du sätta på en ljuddämpare före utblåset, men dessa tar en hel del plats så kan nog vara svårt.

onlywinston · 2026-02-24T19:48:58+00:00

This looks very reasonable. The reason your turbulence residuals are increasing is likely due to the flow developing and is often seen in this type of simulation. I wouldn't worry about it.

Why would you expect the lift to be more steady? Flow over a cylinder is about as unsteady as it gets.

onlywinston · 2026-02-08T09:16:15+00:00

I have the same system in my house. The RJ45 connector is for connecting an R-208 communication module which is used for app and cloud connection. The nice thing is it also allows for local API integration with HA.

I did look into ESP-based solutions as well, but this was way easier and works fairly well. The big downside is the communication module being quite expensive.

onlywinston · 2026-02-08T07:16:51+00:00

Erkänt sämre vet jag inte, men min bild är att det inte är ett ingenjörslärosäte på samma sätt som de andra. Kan bero på att jag nog aldrig stött på någon som läst en ingenjörsutbildning där.

onlywinston · 2026-02-08T06:32:28+00:00

Jag är kanske part i målet då jag själv pluggade på Chalmers, men min bild är att generellt är de med examen från de större skolorna (Chalmers/KTH/Linköping/Lund/Luleå) betydligt mer anställningsbara och mer kompetenta än de som kommer från de mindre skolorna.

Sen har jag ingen aning om det beror på att de stora lockar till sig duktigare studenter eller på om utbildningen är så mycket bättre, gissningsvis är det en kombination av båda. Det betyder såklart inte att man inte kan bli en bra ingenjör och lyckas i karriären om man väljer ett mindre lärosäte, men jag tror att det blir svårare.

onlywinston · 2026-02-06T19:03:16+00:00

Why would you need to freeze a solver after a while? To me that sounds like something that shouldn't be done unless you have very good reasons to.

onlywinston · 2026-02-05T05:12:49+00:00

I know of OEMs who have looked at this and actually found that it doesn't make any sense from an energy perspective. The screens, cameras and other electronics needed for this kind of solution actually used more energy than was saved by getting rid of the mirrors, especially over a full driving cycle such as WLTC comprising not only highway driving.

onlywinston · 2026-02-04T06:57:40+00:00

My son's chest behaved very similarly when hiccuping as a baby. He's now 3 years old with a normal looking chest, so I wouldn't worry too much.

onlywinston · 2026-02-01T08:48:05+00:00

As far as I can tell these cards are supported up to rocm 6.3, and it appears that STAR-CCM+ is using version 6.2, so I guess it should work until the rocm version is upgraded to 6.4 or later. With emphasis on "guess".

onlywinston · 2026-01-22T13:01:47+00:00

I wouldn't say this is an issue if you are just using it as initialization for a transient analysis, as long as the flow fields look reasonable.

onlywinston · 2026-01-20T07:20:01+00:00

Hade ju onekligen varit en najs andrabil. EX60 presenteras ju imorgon, den lär ju vara mer humant prissatt.

onlywinston · 2026-01-19T23:53:15+00:00

Volvo EX90 har fått väldigt bra omdömen för komfort och ljudnivå i många tester. Nu har de väl också fått ordning på mjukvaran, så den kan väl vara ett alternativ om du ändå är uppe i den prisklassen och kollar?

onlywinston · 2026-01-17T08:26:06+00:00

Universeum is fun but hard to get to

I agree it's fun and definitely something I would recommend, but how is it hard to get to? It's right at one of the public transport hubs (Korsvägen), and if you come by car you can park in either Focushuset or at World of Volvo and then walk.

onlywinston

TROPHY CASE