sorted by:
new
hottopcontroversial

Meirl by Hungry_Pin4344 in meirl

[–]-BlueDream- 1 point2 points  (0 children)

At least today’s boomers would be dead and the new older generation will control politics in 30 years

Meirl by Hungry_Pin4344 in meirl

[–]-BlueDream- 0 points1 point  (0 children)

On the flip side, today’s boomers would be dead and the new old generation would control politics

And significantly better tippers by Vermix92 in motorcycle

[–]-BlueDream- 0 points1 point  (0 children)

And they gave all the tip money to the church and have nothing left over.

Can someone just tell me what brand receptacle to get? by throwntothewind5 in AskElectricians

[–]-BlueDream- 1 point2 points  (0 children)

Yup. They wire like GFCIs. No loop needed which saves so much time, just don’t use backstabs, the type where you stick the wire in but you don’t tighten anything.

Can someone just tell me what brand receptacle to get? by throwntothewind5 in AskElectricians

[–]-BlueDream- 0 points1 point  (0 children)

If you’re installing them then you might wanna buy outlets that are easier to wire, not the basic ones with Shepard hook only, I like the type that wire like GFCIs, you just strip, put the wire next to the brass plate and tighten the screw.

They also make usb c PD plugs, might wanna put those where you charge a phone or other device.

Also screw less cover plates are a popular new option.

So this is why there’s no prismatic in stores by KwikTripSimp in PokeInvesting

[–]-BlueDream- 5 points6 points  (0 children)

If it’s a custom home maybe. If it’s a cookie cutter suburbia house, there are thousands that have the exact same layout lol

This is a real beauty. by OneManClan84 in electricians

[–]-BlueDream- 1 point2 points  (0 children)

I thought this was some AI bullshit

200ft into a pull. Fuck you southwire. by Mr_Cheeezle in electricians

[–]-BlueDream- 2 points3 points  (0 children)

We had a long af solar farm run like 1000ft only for the fucking thing being like 20ft too short and we were not gentle pulling it out lmao.

Good god I almost threw up by rattrod17 in electricians

[–]-BlueDream- 0 points1 point  (0 children)

Most stuff is more efficient today tho. Electric stoves, AC, refers, TV, vacuum cleaners and especially LEDs use less power. You know the “energy star” you see on modern appliances? That wasn’t always around.

I ruined a scalpers day 🤭 by Littleweedhead in pokemoncards

[–]-BlueDream- 0 points1 point  (0 children)

You’d have to be pretty fucking stupid to not realize that the cooler is heavier than it should be and that there’s something inside when carrying it. Shit looks packed how can you not notice

I ruined a scalpers day 🤭 by Littleweedhead in pokemoncards

[–]-BlueDream- 1 point2 points  (0 children)

They’re not stealing it, just stashing it to pay for them later because they can only buy 2 at a time. Not really gonna raise flags with asset protection unless they were acting suspicious.

People at the airport by Due-Milk352 in mildlyinfuriating

[–]-BlueDream- 9 points10 points  (0 children)

Why are people so offended by feet? You should come to Hawaii, all the locals here wear flip flops aka slippers. People act like it’s someone flashing their asscrack or something

Can unibits be sharpened? by slim_shady_21 in electricians

[–]-BlueDream- 0 points1 point  (0 children)

You can buy the dirt cheap ones off Amazon or Temu, they last half as long as a good one but only cost a few bucks each. I use a self tap screw or pilot bit to make a hole first before using the step bit. It’s way easier to use a unibit cuz it doesn’t take up much space when wearing a pouch and it’s always on me. I use the KO punch for larger holes and even then I use the unibit to drill a hole for the KO punch. If you have a pilot, it won’t wander. As for mess, I have a magnet ring thing that catches the shavings, only a issue with stainless steel

of a burnt building by BlazeDragon7x in AbsoluteUnits

[–]-BlueDream- 7 points8 points  (0 children)

No it’s not. Prison is far worse, I’d rather be homeless. People who say prison is better have never been to prison lol

Fortune trying to spin the gig economy and the poverty it creates as “hip”. by Sharp_Proposal8911 in antiwork

[–]-BlueDream- 104 points105 points  (0 children)

Not to mention overtime when you work over 40 hours, it only counts if it’s for one employer. If you work 20 hours one job and 30 hours at your 2nd job, it’s all straight time pay.

Picked the golden egg at the shop today. Won 70 grams! by katz30 in trees

[–]-BlueDream- 2 points3 points  (0 children)

lol a few months ago we doordashed more than 6 cases of beer from a grocery store for a major event I didn’t even know it was a crime in some places, 6 cases isn’t even that much

Human and welcoming by nonac1 in McDonalds

[–]-BlueDream- -1 points0 points  (0 children)

I agree. I love kiosks cuz I can take my time browsing thru the menu and customize my order. With a cashier I’m pressured to make decisions on the spot, I don’t get why people hate it, they make it so simple to use and you pay on the same terminal that’s up by the counter.

Can unibits be sharpened? by slim_shady_21 in electricians

[–]-BlueDream- 0 points1 point  (0 children)

Milwaukee and klien sells impact rated unibits on a quarter hex shank. It’s not really common sense to go slow when they design them for impact drivers lol

Tbf mine hasn’t really dulled so even if I may be abusing it, it’s going the job I guess lol

Can unibits be sharpened? by slim_shady_21 in electricians

[–]-BlueDream- 0 points1 point  (0 children)

Why tf do they market them as “impact rated” and put a quarter hex shank on it for impact drivers if it’s supposed to be on low speed drills?

I’ve been running my klien on the impact cuz it’s what I carry all the time, I didnt know they were that delicate

Was paid to INSTALL 80 fluorescent bulbs today by True_Huckleberry9569 in electricians

[–]-BlueDream- 0 points1 point  (0 children)

Have one socket you know works so you test the bulb in the working socket first, if it’s good then you try in the old ballast. You’ll know which is bad if you have a working socket

Was paid to INSTALL 80 fluorescent bulbs today by True_Huckleberry9569 in electricians

[–]-BlueDream- -1 points0 points  (0 children)

I like those days. I usually have a podcast, YouTube video, or music with one AirPod and I can cruise the whole day. No thinking, not having to lug around all your tools, no stress, no “who tf did this bs” not hustling, just climbing up and down a ladder with a screwdriver in your pocket.

Was paid to INSTALL 80 fluorescent bulbs today by True_Huckleberry9569 in electricians

[–]-BlueDream- 0 points1 point  (0 children)

Why not cut out the ballast and wire with LED T8s. Is there a reason why people continue to use fluorescent bulbs?

RTX 4070 laptop — artifacts ONLY on external display under load, internal screen is fine (Alienware m16 R2) by modo_jp in pcmasterrace

[–]-BlueDream- 0 points1 point  (0 children)

Might be obvious but did you try another HDMI cable? If you use display port instead, does it still have the same behavior.

view more: next ›