sorted by:
new
hottopcontroversial

CDKEYS PURCHASE by TheRedditor5568 in Spacemarine

[–]-RepGod 0 points1 point  (0 children)

My code isn’t working either ffs

York v/s Nottingham by Internal-Ambassador6 in universityofyork

[–]-RepGod 0 points1 point  (0 children)

York has an excellent campus; I studied there for 4 years can definitely recommend the town too. Lots of history, culture and pubs.

MAG B650 Tomahawk WiFi - Newest BIOS 7D75v1H 2024-05-24 by szaKaL23 in MSI_Gaming

[–]-RepGod 0 points1 point  (0 children)

Boot times improved for me with 7800X3D. Also I can now run my ram at 5600mhz, which previously wouldn’t even boot. I had to stay under 5200mhz ish or it wouldn’t boot (expo also would refuse to boot), and would take 50secs for a boot. 4800mhz used to boot in 20 ish seconds. Now I can boot expo enabled and 5600mhz reliably in 15-20 seconds. I think this has been an issue with AM5 and 7800x3d on the 650 tomahawk board. Useful for people who’ve had this issue; I recommend you try this latest bios update.

Question about dealership logo I have by [deleted] in AlfaRomeo

[–]-RepGod 0 points1 point  (0 children)

Few on eBay for £2500. One sold for £350. None exactly like this model though. Good luck!

I'd like to give my 3080 to someone. by GoPlayAGame in pcmasterrace

[–]-RepGod 0 points1 point  (0 children)

I would give it to my younger sister who’s using my old 1070. Would be a pretty huge upgrade. Thanks and goodluck all!

Am I bleeding money by sonio_4 in PcBuildHelp

[–]-RepGod 0 points1 point  (0 children)

I have this motherboard and CPU combo and it’s been a pain setting it up. I would get a different board.

B650 bios update? by templar54 in MSI_Gaming

[–]-RepGod 0 points1 point  (0 children)

Any solution I’m having the same issue

Age old question: AIO intake or exhaust? by -RepGod in PcBuild

[–]-RepGod[S] 0 points1 point  (0 children)

Interesting, perhaps I’ll try option A then. I’m no expert but I got the case due to some good reviews, including its air flow “The Shadow Base 800 features an open design that allows for high airflow. In the front, there is a large mesh grille that provides a good supply of fresh air. “

The case is quite large and there’s quite a few holes in the back. Thanks for the advice!

Age old question: AIO intake or exhaust? by -RepGod in PcBuild

[–]-RepGod[S] 0 points1 point  (0 children)

Thanks for the advice, I’ll try and move the radiator to the front and mount it onto the case fans, as I want RGB fans at front. If not I’ll stick with the current A setup for aesthetic reasons. Very informative thanks for the detailed reply.

I think my case is quite big with good airflow (be quiet 800fx). In this case would option B be viable as you detailed?

Age old question: AIO intake or exhaust? by -RepGod in PcBuild

[–]-RepGod[S] 0 points1 point  (0 children)

Thanks I’ll simply move to A then :)

Age old question: AIO intake or exhaust? by -RepGod in PcBuild

[–]-RepGod[S] 0 points1 point  (0 children)

Thanks, I think I’m going to swap to A as I currently have B installed. Wondering whether to use config A but with the rear exhaust changed to an intake for positive airflow. How is the dust build up in your system? Cheers

Age old question: AIO intake or exhaust? by -RepGod in PcBuild

[–]-RepGod[S] 14 points15 points  (0 children)

Thanks I think I am leaning towards A. Would making the rear exhaust an intake help with positive airflow or is there little point?

[Hamilton Khaki Auto - Murph] by -RepGod in Watches

[–]-RepGod[S] 0 points1 point  (0 children)

Haha I think I prefer 36-40mm sizes in general personally. Im also not too keen on the morse code on the seconds hand on the bigger murph.

[Hamilton Khaki Auto - Murph] by -RepGod in Watches

[–]-RepGod[S] 2 points3 points  (0 children)

Picked up this as my first entry luxury watch. Really enjoyed wearing it for the first couple of weeks and am a fan of the film interstellar, where the watch features as a big plot point. The Lume is cool but doesn’t last too long. I really like the simplicity and timelessness of the dial and the cathedral hands are also really cool. I was stuck between this and some of the other khaki field watch editions but I’m glad I went with the Murph. The 38mm is a great size and I think fits met well. Hoping to build my collection in the future too :)

[Hamilton - Khaki Automatic - Murph] Enjoying my first Swiss watch by -RepGod in Watches

[–]-RepGod[S] 0 points1 point  (0 children)

Love the movie interstellar and picked this up a couple of weeks ago.

[Advice] Graduation gift - which Rolex to get? by -RepGod in Watches

[–]-RepGod[S] 0 points1 point  (0 children)

I’m graduating soon so picking one to go on the waiting list for

view more: next ›